1. Киришүү
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Generic WX-255 (149S147) 81 Gallon WELL-X-TROL Well Tank. Please read these instructions thoroughly before proceeding with installation or use. Proper adherence to these guidelines will ensure optimal performance and longevity of your well tank.
2. Коопсуздук маалыматы
ЭСКЕРТҮҮ: Installation and service of this well tank should only be performed by a qualified professional. Failure to follow these instructions could result in serious injury, property damage, or death.
- Always depressurize the system before attempting any service or maintenance.
- Ensure all electrical connections are made according to local codes and manufacturer instructions.
- 150 PSI максималдуу иштөө басымынан ашпаңыз.
- Protect the tank from freezing temperatures.
- Орнотуу жана тейлөө учурунда тиешелүү жеке коргонуу шаймандарын (ЖКК) кийиңиз.
3. Орнотуу жана орнотуу
The WX-255 well tank is designed for plumbing applications in well water systems. Professional installation is highly recommended to ensure correct setup and system integrity.
3.1 Таңгактан чыгаруу жана текшерүү
Carefully remove the tank from its packaging. Inspect for any visible damage that may have occurred during shipping. Report any damage to your supplier immediately.
3.2 Жайгашкан жери
Select a location that is protected from freezing, easily accessible for service, and can support the weight of the tank when full (approximately 778 lbs when filled with 81 gallons of water, plus the tank's own weight of 103 lbs).
3.3 Connection
Connect the tank to your plumbing system using the 1-1/4 inch connection port. Ensure all connections are watertight and properly sealed. Use appropriate pipe dope or Teflon tape.
3.4 Precharge Pressure
The tank comes precharged to 38 PSI. Verify this pressure using a reliable pressure gauge. Adjust the precharge pressure if necessary to match your pump's cut-in pressure, typically 2 PSI below the pump's cut-in pressure.
1-сүрөт: Generic WX-255 81 Gallon WELL-X-TROL Well Tank. This image shows the overall design of the well tank, highlighting its blue enamel shell and stand, ready for plumbing system integration.
4. Иштөө нускамалары
Once properly installed and the system is filled with water, the well tank operates automatically in conjunction with your well pump. The tank stores pressurized water, reducing pump cycling and providing a reserve of water.
- The pump will turn on when the system pressure drops to the pump's cut-in setting.
- The pump will fill the tank and system until the cut-out pressure is reached, then turn off.
- Water is drawn from the tank until the pressure drops again, at which point the cycle repeats.
5. Техникалык тейлөө
Regular maintenance ensures the efficient and reliable operation of your well tank.
5.1 Annual Precharge Pressure Check
At least once a year, check the tank's precharge pressure. First, turn off the pump and drain the system completely. Then, check the air valve pressure with a gauge. Adjust if necessary to maintain optimal system performance.
5.2 Inspection for Leaks
Periodically inspect the tank and all connections for any signs of leaks or corrosion. Address any issues promptly to prevent further damage.
5.3 Diaphragm Integrity Check
If water comes out of the air valve when checking pressure, it indicates a ruptured diaphragm, and the tank will need to be replaced.
6. Кыйынчылыктарды
This section addresses common issues you might encounter with your well tank.
6.1 Pump Cycles Too Frequently
- Мүмкүн болгон себеп: Low or no air precharge in the tank.
- Чечим: Check and adjust the precharge pressure as described in Section 5.1.
- Мүмкүн болгон себеп: Ruptured diaphragm.
- Чечим: Танкти алмаштырыңыз.
6.2 Суунун төмөнкү басымы
- Мүмкүн болгон себеп: Incorrect precharge pressure.
- Чечим: Verify and adjust precharge pressure.
- Мүмкүн болгон себеп: Issues with the well pump or other system components.
- Чечим: Consult a qualified professional to diagnose the entire well system.
6.3 Water Leaking from Tank
- Мүмкүн болгон себеп: Бошоң сантехника байланыштары.
- Чечим: Tighten connections and re-seal if necessary.
- Мүмкүн болгон себеп: Tank shell corrosion or damage.
- Чечим: Танкти алмаштырыңыз.
7. Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Модель номери | WX-255 (149S147) |
| Танк көлөмү | 81 галлон |
| Max Accept. Factor | 0.41 |
| Туташуу өлчөмү | 1-1/4 дюйм |
| Precharged PSI | 38 psi |
| Макс басым | 150 PSI |
| Бийиктик | 56 3/8 дюйм |
| Диаметри | 22 дюйм |
| Салмагы (бош) | 103 фунт |
| Макс Температура | 200°F |
| Каптоо | Blue Enamel |
| Shell Material | Болот |
| Диафрагма материалы | Heavy Duty Butyl |
| Лайнер материалы | Virgin Polypropylene |
| Колдонмо | Сантехника |
8. Кепилдик маалыматы
This Generic WX-255 (149S147) WELL-X-TROL Well Tank comes with a 7 жылдык Чектелген Кепилдик. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use and service. For specific terms and conditions, please refer to the warranty documentation provided at the time of purchase or contact the manufacturer.
9. Колдоо
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your retailer or a qualified plumbing professional. Always provide the model number (WX-255) and any relevant purchase information when seeking support.
