1. Киришүү
This manual provides detailed instructions for the installation, operation, and maintenance of your DOITOOL Ultrasonic Water Level Sensor Tank Gauge Liquid Level Meter. This device is designed to monitor water levels and temperatures in outdoor tanks from the comfort of your indoor living space, offering a transmission range of up to 100 meters in open fields.
2. Продукциянын өзгөчөлүктөрү
- Indoor temperature display (°C/°F)
- Tank temperature display (°C/°F)
- Water level displayed on a 10-bar graph
- Records minimum and maximum indoor and tank temperatures
- Adjustable tank level alarm modes (high/low)
- Tank empty alert function
- Time display (12/24hr format)
- Time alarm mode
- Tank level updated every 30 seconds or 3 minutes
- Өтүү диапазону: 100м (ачык талаа)
- Tank level/depth measurement range: 0.5m to 15m
- Minimum air gap requirement: 0.5m
- Receiver unit can be wall-mounted or placed on a surface using its stand
3. Пакеттин мазмуну
- 1 x Liquid Level Meter Receiver Unit
- 1 x Ultrasonic Transmitter Unit
- Колдонуучунун Колдонмосу (бул документ)
Note: Batteries are not included. The receiver unit typically requires 2x AA batteries, and the transmitter unit requires 6x AAA batteries.
4. Техникалык шарттар
| Спецификация | Нарк |
|---|---|
| Receiver Unit Dimensions | 4.13"L x 3.66"W x 0.98"H (10.5 x 9.3 x 2.5 см) |
| Receiver Unit Weight | 8 унция |
| Материал | Пластик |
| Tank Level/Depth Range | 0.5мден 15мге чейин |
| Minimum Air Gap | 0.5 м |
| Берүүнүн диапазону | 100 м (ачык талаа) |
| Power (Receiver) | Батареялар (кошумча эмес) |
| Күч (өткөргүч) | Батареялар (кошумча эмес) |
5. Орнотуу жана орнотуу
5.1 Батареяны орнотуу
Before installation, insert the required batteries into both the receiver and transmitter units. Ensure correct polarity.

Сүрөт: Арткы view of the receiver unit, showing the battery compartment with the cover removed. This is where the receiver unit's batteries are inserted.
5.2 Transmitter Unit Installation
The transmitter unit is installed at the top of your water tank. Follow these guidelines for optimal performance:
- Антенна: Ensure the antenna is positioned for clear signal transmission.
- Balance Bubble: Use the integrated balance bubble to ensure the transmitter is level for accurate readings.
- Монтаждоо: Secure the transmitter using screws through the designated bracket.
- Сенсордун жайгашуусу: The ultrasonic sensor should have a clear path to the water surface. Ensure there is a minimum air gap of 0.5 meters (H1 height) between the sensor and the maximum water level.
- Tank Opening: The tank opening for the sensor should be at least 20cm in diameter (Ø > 20CM) to prevent interference from tank walls.

Сүрөт: A detailed diagram illustrating the components of the transmitter unit (antenna, balance bubble, sensor), a setup sketch for proper installation on a tank, and visual examples of incorrect installation methods to avoid.
5.3 Receiver Unit Placement
The receiver unit can be placed indoors. It features a stand for desktop use or can be mounted on a wall using the integrated hooks. Position it in a location where the signal from the transmitter is strong and clear.
6. Иштөө нускамалары
The receiver unit displays various information on its screen, including indoor temperature, tank temperature, water level, and time. It features several buttons for configuration and viewмаалыматтар.

Сүрөт: The front of the receiver unit, showing the digital display and control buttons: 'set', '+/max/min', '-/tank', and 'alarm'.
6.1 Дисплейview
- T.ANK: Displays the water level in the tank, often represented by a 10-bar graph and a percentage.
- °C/°F: Indicates temperature units.
- Ички температура: Shows the ambient temperature where the receiver is located.
- Танктын температурасы: Shows the temperature of the water in the tank.
- TIME: Учурдагы убакытты көрсөтөт.
6.2 Баскыч функциялары
- ЖӨНДӨӨ: Used to enter settings mode for time, alarms, and units. Press to cycle through settings.
- +/MAX/MIN: Кадимки режимде үчүн басыңыз view maximum and minimum recorded temperatures. In settings mode, use to increase values.
- -/TANK: In normal mode, press to switch between tank level display units (meters/feet). In settings mode, use to decrease values.
- ЭСКЕРТҮҮ: Used to set or activate/deactivate various alarms (e.g., high/low water level, empty tank).
6.3 Убакытты жана ойготкучтарды орнотуу
- басыңыз SET button to enter time setting mode. Use + or - сааттарды жана мүнөттөрдү тууралоо. Басыңыз SET ырастоо үчүн дагы.
- To set water level alarms, press the АЛАРМ баскычы. Колдонуу + or - to adjust the high or low water level thresholds. Press АЛАРМ again to confirm and activate.
- An audible alarm will sound when a set condition (e.g., tank empty, high/low level) is met.
7. Техникалык тейлөө
- Тазалоо: Wipe both units with a soft, dry cloth. Do not use abrasive cleaners or immerse units in water.
- Батареяны алмаштыруу: Replace batteries in both units when the low battery indicator appears on the receiver display. Ensure to use fresh batteries of the correct type and size.
- Transmitter Check: Periodically check the transmitter unit for any obstructions or debris that might interfere with the ultrasonic sensor's operation. Ensure it remains level.
8. Кыйынчылыктарды
- No Reading on Receiver:
- Эки блоктун тең батареяларын текшерип, зарыл болсо алмаштырыңыз.
- Ensure both units are within the 100m transmission range and there are no significant obstructions.
- Verify the transmitter is correctly installed and level.
- Inaccurate Water Level:
- Confirm the transmitter is level and the sensor has a clear path to the water.
- Ensure the minimum air gap of 0.5m is maintained.
- Check for debris or buildup on the sensor.
- Temperature Readings Incorrect:
- Ensure the units are not exposed to direct sunlight or extreme heat sources that could affect readings.
9. Коопсуздук маалыматы
- Аппаратты өз алдынча бөлүүгө же оңдоого аракет кылбаңыз. Тейлөө үчүн квалификациялуу кызматкерлерге кайрылыңыз.
- Аппаратты экстремалдык температурадан, тике күн нурунан жана нымдуулуктан алыс кармаңыз.
- Dispose of batteries according to local regulations. Do not mix old and new batteries or different types of batteries.
- Бул шайман оюнчук эмес. Балдар жетпеген жерде сактаңыз.
10. Кепилдик жана колдоо
For warranty information and technical support, please refer to the retailer where you purchased the product or visit the official DOITOOL brand webсайт. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.
You can find more information about DOITOOL products at the DOITOOL Store.