Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your DM25LEU/S-1.1/28 Electric Roller Blinds/Shades Tubular Motor Kit. Please read this manual thoroughly before beginning installation or operation to ensure proper function and safety.
Коопсуздук маалыматы
Орнотуудан же тейлөөдөн мурун электр энергиясы өчүрүлгөнүн текшериңиз.
Do not expose the motor to water or excessive humidity.
Keep children and pets away from operating blinds.
Only use the specified 5V 2A Micro-USB charger for recharging.
Verify the dimensions of your roller shade tube (38mm / 1.5in) before installation.
Пакеттин мазмуну
The DM25LEU/S-1.1/28 kit includes the following components:
DM25LEU/S Bi-Directional Blinds Motor
DD2702H Handheld Controller
38mm Tube Brackets
Image: The complete kit including the tubular motor, handheld remote, and the mounting brackets.
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модел | DM25LEU/S-1.1/28 |
| Мотор диаметри | 25mm (suitable for 38mm / 1.5in shade tube) |
| Тtage | USB: 5V 1A / 5V 2A |
| Момент | 1.1 Нм |
| Учурдагы | 1.25A |
| Ылдамдык | 28rpm |
| Protection Rating (IP) | IP20 |
| Продукциянын өлчөмдөрү | 19"L x 1.8"W |
| Материал | Пластик, металл |
| Башкаруу түрү | Алыстан |
| Иштөө режими | Автоматтык |
Image: Detailed diagram illustrating the motor's dimensions and a table of its technical specifications.
Орнотуу жана орнотуу
Follow these steps to install your tubular motor kit:
Prepare the Shade Tube
Ensure your roller shade tube has an inner diameter of 38mm (1.5 inches). The motor is designed to fit snugly inside this tube.
Image: Detailed diagram illustrating the motor's dimensions and its compatibility with a 38mm shade tube.
Insert the Motor
Carefully slide the DM25LEU/S motor into one end of the roller shade tube until it is fully seated. The motor's drive wheel should engage with the inner surface of the tube.
Сүрөт: Жакын план view of the motor's end, highlighting the drive wheel mechanism.
Кашаларды тиркөө
Secure the provided 38mm tube brackets to your window frame or wall. Ensure they are level and spaced correctly to support the roller shade assembly.
Image: The complete kit including the motor, handheld remote, and the mounting brackets.
Mount the Shade
Place the assembled roller shade (with the motor inside) onto the installed brackets. Ensure it is securely seated and can rotate freely.
Кубатты туташтыруу
Connect the motor to a 5V 2A Micro-USB power source for initial charging and operation. The motor features a Micro-USB port for convenience.
Image: The tubular motor and its accompanying remote control. The motor has a visible charging port.
Иштөө нускамалары
The DM25LEU/S motor is controlled by the DD2702H handheld controller.
Алыстан башкаруу функциялары
The DD2702H handheld controller features several buttons for intuitive operation:
Up Arrow (▲): Moves the blinds upwards (opens).
Down Arrow (▼): Moves the blinds downwards (closes).
Токто (■): Stops the blinds at the current position.
Орнотуу баскычы: Used for programming limits and pairing (refer to programming section).
Канал тандоо: The remote may have buttons or a display to select different channels if controlling multiple motors.
Image: The DD2702H handheld remote control, showing its digital display and control buttons.
Негизги операция
Open Blinds: басыңыз Жогору жебе button to raise the blinds.
Close Blinds: басыңыз Төмөн жебе button to lower the blinds.
Stop Blinds: басыңыз Токто button to halt the blinds at any desired position.
Жогорку жана төмөнкү чектерди коюу
To ensure the blinds stop precisely at your desired open and closed positions, you must set the upper and lower limits. Refer to the specific instructions provided with your remote control for detailed programming steps, as these can vary slightly by remote model.
General steps typically involve:
Entering programming mode (often by pressing a combination of buttons or a hidden button on the motor).
Moving the blinds to the desired upper limit and confirming.
Moving the blinds to the desired lower limit and confirming.
Exiting programming mode.
Алыстан башкарууну жупташтыруу
If your remote is not responding, it may need to be paired with the motor. Consult your remote's specific pairing instructions. This usually involves a short press of a pairing button on the motor or a sequence of button presses on the remote while the motor is in pairing mode.
Техникалык тейлөө
The DM25LEU/S motor is designed for low maintenance. Follow these guidelines to ensure longevity:
Тазалоо: Wipe the motor and remote with a dry, soft cloth. Do not use abrasive cleaners or immerse in water.
Заряддоо: Recharge the motor using a standard 5V 2A Micro-USB charger when the battery is low. A full charge ensures optimal performance.
Image: The motor's charging port, designed for a Micro-USB cable.
Батареянын иштөө мөөнөтү: The motor uses a Li-ion rechargeable battery. Battery life will vary based on usage frequency. Recharge as needed.
Экологиялык шарттар: Avoid exposing the motor to extreme temperatures or direct sunlight for prolonged periods.
Проблемаларды чечүү
If you encounter issues with your DM25LEU/S motor, refer to the following common problems and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Motor does not respond to remote. | Low battery in motor or remote; Remote not paired; Obstruction. | Charge the motor. Replace remote batteries. Re-pair the remote with the motor. Check for any physical obstructions preventing movement. |
| Blinds stop at incorrect positions. | Limits not set or incorrectly set. | Re-program the upper and lower limits using the remote control. |
| Мотор адаттан тыш үн чыгарат. | Motor not properly seated in tube; Internal issue. | Ensure the motor is fully and correctly inserted into the shade tube. If noise persists, contact support. |
| Motor does not charge. | Faulty charging cable or adapter; Damaged charging port. | Try a different 5V 2A Micro-USB cable and adapter. Inspect the charging port for damage. |
Кепилдик жана колдоо
This product comes with a standard manufacturer's warranty. For specific warranty details, please refer to the documentation provided at the time of purchase or contact the seller directly.
For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact your retailer or the manufacturer's customer service department. Please have your model number (DM25LEU/S-1.1/28) and purchase information ready.
