Amazon Basics Stylus Pencil (ZD-PC011) User Manual

Introduction

This manual provides instructions for the Amazon Basics Stylus Pencil, Model ZD-PC011. This digital stylus is designed for use with compatible iPad models, offering features like palm rejection and magnetic attachment for an enhanced user experience.

Жайгашуу

Шайкештикке талаптар

Ensure your iPad's iOS is updated to version 12.2 or above for optimal performance and compatibility with the stylus pencil.

Баштапкы туташуу

If you have previously connected an Apple Pencil to your iPad, you must first disconnect it. Navigate to iPad Орнотуулар > Bluetooth, locate the Apple Pencil, and select "Forget This Device."

To power on the stylus, double-tap the top touch button. The indicator lights will illuminate, confirming it is active. The stylus is plug-and-play; no additional drivers are required for basic functionality.

Магниттик тиркеме

The stylus can magnetically attach to compatible iPad models for convenient storage and access.

Image: The Amazon Basics Stylus Pencil shown magnetically attached to the side of an iPad, demonstrating its storage feature.

Video Guide: How to Use

Video: An official Amazon video demonstrating the setup, basic operation, and features of the stylus pen, including powering on, writing, and charging.

Иштөө нускамалары

Негизги колдонуу

Once powered on and connected, the stylus is ready for use. Simply touch the tip to your iPad screen to write, draw, or navigate applications.

Palm Rejection

The stylus features palm rejection technology, allowing you to rest your hand comfortably on the iPad screen while writing or drawing without interfering with the stylus input.

Adjusting Line Thickness

This stylus does not have pressure sensitivity. To adjust line thickness or other drawing parameters, use the settings available within your specific drawing or note-taking application.

Image: A user's hand holding the stylus and writing on an iPad screen, illustrating the palm rejection feature in action.

Техникалык тейлөө

Стилусту заряддоо

The stylus features a USB Type-C charging port. Connect the provided USB-C cable to the stylus and a power source. A full charge takes approximately 30 minutes and provides 8-10 hours of continuous use.

The stylus has a power-saving auto sleep/off function to conserve battery.

Батарея индикатор жарыктары:

• Three indicator lights on: Remaining battery level above 75%.
• Two indicator lights on: Remaining battery level 25% - 75%.
• One indicator light on: Remaining battery level below 25%.

Image: The stylus pen connected to a USB-C cable, illustrating the charging process.

Нибди алмаштыруу

If the stylus experiences intermittent disconnection or unresponsive clicks, the nib may need to be replaced. The product includes 2 replacement tips.

1. Эски учту алып салуу үчүн аны сааттын жебесине каршы акырын бураңыз.
2. Align the new nib with the stylus tip and twist clockwise until securely fastened.

Сүрөт: жакын план view of the stylus pen tip, highlighting the replaceable nib.

Проблемаларды чечүү

Стилус жооп бербей жатат

• Күчтү текшерүү: Ensure the stylus is powered on by double-tapping the top button. Verify battery level using the indicator lights.
• Check iPad Compatibility: Confirm your iPad model is compatible (2018 or later) and running iOS 12.2 or above.
• Башка стилустарды ажыратыңыз: If an Apple Pencil or other stylus was previously paired, ensure it is disconnected from your iPad's Bluetooth settings.
• Replace Nib: If the stylus experiences intermittent disconnection or unresponsive clicks, the nib may be worn and needs replacement. Refer to the "Replacing the Nib" section.

Техникалык шарттар

Кепилдик жана колдоо

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Amazon Basics support page.