Introduction
This manual provides essential instructions for the proper installation, use, and maintenance of your Evenflo Chase LX Harnessed Booster Car Seat. Please read all instructions carefully before using the car seat and keep this manual for future reference. Proper use ensures the safety and comfort of your child.
Маанилүү коопсуздук маалыматы
ЭСКЕРТҮҮ:
- Балаңызды ар дайым көрсөтмөлөргө ылайык автоунаа отургучуна жана автоунаа отургучуна бекитип коюңуз.
- Балаңызды эч качан унаанын отургучунда кароосуз калтырбаңыз.
- Do not use this car seat if it has been involved in a crash, even if there is no visible damage. Replace it immediately.
- Refer to your vehicle owner's manual for specific car seat installation instructions and locations.
- This car seat is designed for forward-facing use only.
Продукт өзгөчөлүктөрү
- 2 Seats in 1: Converts from a forward-facing harness seat to a belt-positioning booster.
- Removable Head Pillow: Provides comfort and support, easily removable for cleaning.
- Эки кубок кармагычтар: Integrated cup holders for convenience.
- Бука позициялары: Two crotch buckle positions for growing children.
- Up-Front Harness Adjust: Central front access for easy harness adjustment.
- Vehicle Belt Guides: Ensures proper vehicle belt positioning in booster mode.
- Кир жуугуч машинада жууса боло турган кездемелер: Durable fabrics for easy cleaning.
- Side Impact Tested: Meets or exceeds federal safety standards and Evenflo's Side Impact Test Standard.
Компоненттер бүттүview
Familiarize yourself with the main components of your Evenflo Chase LX car seat.

Сүрөт 1: Алдыңкы view of the Evenflo Chase LX Harnessed Booster Car Seat, showing the harness system, headrest, and dual cup holders.

2-сүрөт: Каптал view of the Evenflo Chase LX Harnessed Booster Car Seat, highlighting the side impact protection and overall structure.

3-сүрөт: Бурчтуу view of the Evenflo Chase LX Harnessed Booster Car Seat, showing the full seat and harness system.
Орнотуу жана орнотуу
Mode 1: 5-Point Harness (Forward-Facing)
For children weighing 30-40 lbs (13.6-18.1 kg) and measuring 28-50 inches (71-127 cm) in height.
- Position the Car Seat: Place the car seat forward-facing on the vehicle seat. Ensure the vehicle seat back is upright.
- Adjust Harness Height: Select the harness slots that are at or slightly above your child's shoulders.
- Secure with Vehicle Belt or LATCH:
- Кулпу системасы: Attach the lower anchor connectors to your vehicle's lower anchor bars. Press down firmly on the car seat while tightening the LATCH strap until the car seat is secure and moves less than 1 inch (2.5 cm) side-to-side or front-to-back at the belt path.
- Унаа коопсуздук куру: Route the vehicle lap and shoulder belt through the designated belt path on the car seat. Buckle the vehicle belt and remove all slack by pressing down on the car seat while pulling the shoulder belt. Lock the vehicle seat belt according to your vehicle owner's manual.
- Үстүнкү байлоочу жипти бекитүү: Connect the top tether strap to the vehicle's top tether anchor and tighten it securely.

Figure 4: Image showing the up-front harness adjustment mechanism, allowing for easy tightening and loosening of the harness straps.

Сүрөт 5: Жакын пландан view of the two crotch buckle positions, demonstrating how to adjust for a growing child.
Mode 2: High-Back Booster
For children weighing 40-100 lbs (18.1-45.3 kg) and measuring 43-57 inches (109-145 cm) in height.
- Remove Harness: Follow the instructions in your car seat manual to remove the 5-point harness system. Store the harness components in a safe place for future use if needed.
- Position the Car Seat: Place the booster seat forward-facing on the vehicle seat.
- Баланын жайгашуусу: Ensure your child's back is flat against the booster seat back.
- Vehicle Belt Routing: Route the vehicle lap belt under the armrests and across your child's upper thighs. The shoulder belt must pass through the red belt guide near your child's shoulder.
- Secure Child: Buckle the vehicle seat belt and ensure it lies flat and snug across your child's body, without any twists.

Figure 6: The Evenflo Chase LX car seat configured in high-back booster mode, showing the path for the vehicle's shoulder belt through the red guide.
Иштөө нускамалары
Балаңызды кур менен бекитүү режиминде бекитүү
- Балаңызды унаа отургучуна аркасы отургучтун артына тийип тургандай кылып жаткырыңыз.
- Bring the harness straps over your child's shoulders and buckle the chest clip at armpit level.
- Insert the two buckle tongues into the crotch buckle until they click.
- Pull the harness adjustment strap at the front of the seat until the harness is snug against your child's body. You should not be able to pinch any slack in the harness webийиндеринде.

Figure 7: A child properly secured in the Evenflo Chase LX car seat using the 5-point harness system, demonstrating correct strap and buckle positioning.
Баш таянгычты тууралоо
The headrest is designed to self-adjust with the vehicle belt in booster mode. For harness mode, ensure the headrest provides proper support and the harness straps are at the correct height.

Figure 8: A hand demonstrating the removal of the plush head pillow for cleaning or as the child grows, highlighting its easy-to-detach design.
Тейлөө жана тазалоо
- кездемелер: The seat pad and head pillow are machine-washable. Use cold water and a gentle cycle. Tumble dry on low heat or air dry. Do not use bleach.
- Аспаптар: Боолорду жарнама менен сүртүңүзamp кездеме. Кир жуугуч машинада жуубаңыз же сууга салбаңыз, анткени бул анын терисин алсыратышы мүмкүн. webbing
- Букалар: Clean buckles with a damp cloth. If the crotch buckle becomes sticky, rinse it with warm water. Do not use detergents or lubricants.
- Пластик жана металл бөлүктөр: жумшак менен сүртүп, гamp кездеме жана жумшак самын.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Жээкти бекемдөө же бошотуу кыйын. | Harness straps may be twisted or caught. | Check for twists in the harness straps. Ensure the harness is routed correctly through the seat back. |
| Унаа отургучу орнотулгандан кийин өтө көп кыймылдайт. | Vehicle belt or LATCH strap not tight enough. | Re-install the car seat, applying more pressure to the seat while tightening the vehicle belt or LATCH strap. Ensure movement is less than 1 inch (2.5 cm). |
| Crotch buckle is sticky or hard to engage. | Food or debris in the buckle mechanism. | Rinse the buckle with warm water. Do not use detergents or lubricants. |
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модел | Chase LX |
| Minimum Weight (Harness) | 30 фунт (13.6 кг) |
| Maximum Weight (Harness) | 40 фунт (18.1 кг) |
| Minimum Weight (Booster) | 40 фунт (18.1 кг) |
| Максималдуу Салмак (Booster) | 100 фунт (45.3 кг) |
| Minimum Height (Harness) | 28 дюйм (71 см) |
| Maximum Height (Harness) | 50 дюйм (127 см) |
| Minimum Height (Booster) | 43 дюйм (109 см) |
| Максималдуу бийиктик (бостер) | 57 дюйм (145 см) |
| Орнотуу түрү | ЛАЧ же унаанын коопсуздук куру |
| Багыттоо | Алга кароо |
| Түрү | 5-упай |
| Элементтин өлчөмдөрү (D x W x Y) | 18"D x 18.5"W x 29.5"H (45.7 см x 47 см x 74.9 см) |
| Элемент Салмагы | 9.1 фунт (4.1 кг) |
| Материалдын түрү | Полиэстер |
Колдоо жана Байланыш
For additional assistance with installation or product questions, please contact Evenflo ParentLink® Consumer Care Team. Live video support with a certified car seat safety technician is available to assist with proper vehicle installation.
Visit the official Evenflo webкөбүрөөк маалымат жана колдоо булактары үчүн сайт.
Evenflo is committed to creating safe and innovative products for families.
Расмий продукт Video
Video 1: Evenflo Chase LX Harnessed Booster Car Seat Product Overview. This video provides a visual guide to the features and functionality of the car seat, including harness adjustment and head pillow removal.