1. Киришүү
This manual provides essential instructions for the proper setup, operation, and maintenance of your Keeson CU380 JLDK.30.03.20 adjustable bed base remote control. Please read this manual thoroughly before use to ensure correct functionality and to prevent any issues.
2. Орнотуу жана жупташтыруу
2.1 Батареяны орнотуу
The remote control requires 2 AAA batteries (not included). To install, slide open the battery compartment cover on the back of the remote. Insert the batteries, ensuring correct polarity (+/-). Close the battery compartment cover securely.
2.2 Remote Pairing Procedure
If your remote control is not already paired with your adjustable bed base, follow these steps:
- 1-кадам: Disconnect the power cord of your adjustable bed base from the electrical outlet. Wait approximately 5 seconds, then plug it back into the outlet.
- 2-кадам: Within 10 seconds of plugging in the power cord, locate the PAIR button on the back of the remote control. Press and hold this PAIR button. The button will illuminate blue and begin flashing.
- 3-кадам: Continue holding the PAIR button until it stops flashing and the LED light on the control box of your bed base goes out. Release the PAIR button. The remote is now paired with the adjustable base.
- 4-кадам: Test all remote functions to confirm successful pairing.
Image: Remote control pairing instructions, illustrating the steps to connect the remote to the bed base.
3. Пультту иштетүү
The remote control provides intuitive buttons for adjusting your bed base. Familiarize yourself with the button layout and their corresponding functions:
- Башты өйдө/ылдый: Төшөктүн баш бөлүгүн тууралайт.
- Бутту өйдө/ылдый: Төшөктүн бут бөлүгүн тууралайт.
- Батир: Returns the bed to a flat position.
- Zero G: Activates the pre-programmed Zero Gravity position, designed to relieve pressure.
- Эстутумдун алдын ала орнотуулары (эгер бар болсо): Some remotes may have programmable memory buttons to save your favorite positions. Consult your bed base manual for specific instructions.
Сүрөт: алдыңкы view of the Keeson CU380 JLDK.30.03.20 remote control, displaying buttons for head/foot adjustment, Zero G, and other functions.
4. Техникалык тейлөө
4.1 Батареяны алмаштыруу
Пульттун жообу солгундап же иштебей калганда батарейкаларды алмаштырыңыз. Ар дайым жаңы AAA батарейкаларын колдонуңуз жана эски батарейкаларды жоопкерчилик менен жок кылыңыз.
4.2 Тазалоо
To clean the remote control, gently wipe it with a soft, dry cloth. Avoid using liquid cleaners or abrasive materials, as these can damage the remote's surface or internal components.
5. Кыйынчылыктарды
5.1 Алыстан башкаруу жооп бербейт
- Батареялардын туура орнотулганын жана түгөнүп калбагандыгын текшериңиз. Керек болсо алмаштырыңыз.
- Verify the remote is properly paired with the bed base by following the pairing procedure in Section 2.2.
- Check that the bed base is plugged into a functional power outlet.
5.2 Шайкештик маселелери
This remote control is specifically designed for Keeson CU380 JLDK.30.03.20 adjustable bed bases. It is not a universal remote. Before purchasing or attempting to use, ensure your bed base's control box model number matches CU380 JLDK.30.03.20.
Image: Visual guide emphasizing the importance of verifying the control box model number and comparing it with the old remote for compatibility.
6. Техникалык шарттар
- Модел: CU380 JLDK.30.03.20
- Шайкеш түзмөктөр: Adjustable bed base (Keeson CU380 JLDK.30.03.20)
- Кубат булагы: 2 AAA батарейка (киргизилген эмес)
- Түсү: Кара
- Өзгөчө өзгөчөлүгү: Not a universal remote
7. Кепилдик жана колдоо
7.1 Кепилдик маалыматы
Specific warranty details for this remote control are not provided in the product information. Please refer to the documentation that came with your adjustable bed base or contact the original seller for warranty inquiries.
7.2 Кардарларды колдоо
If you encounter issues not covered in this manual or require further assistance, please contact the seller or manufacturer of your adjustable bed base. When contacting support, provide detailed information about your bed base, control box, and the remote control, including any serial numbers or model identifiers.
