Aninerel ANJ-3600W-LV

Aninerel 3600W Solar Inverter Charger (Model ANJ-3600W-LV) User Manual

Орнотуу, иштетүү жана тейлөө боюнча комплекстүү колдонмо

1. Киришүү

This manual provides essential information for the safe and efficient operation of your Aninerel 3600W Solar Inverter Charger, Model ANJ-3600W-LV. This device is a pure sine wave hybrid inverter designed to convert DC 48V to AC 110V, featuring a built-in 80A MPPT solar charge controller. It supports various battery types, including battery-less operation, and offers flexible charging and output modes for diverse energy requirements. Please read this manual thoroughly before installation and use.

Aninerel 3600W Solar Inverter Charger with Wi-Fi module

Figure 1: Aninerel 3600W Solar Inverter Charger and Wi-Fi module.

2. Коопсуздук маалыматы

Please observe the following safety precautions to prevent injury and damage to the inverter or connected equipment.

  • Орнотуу жергиликтүү электр эрежелерине ылайык квалификациялуу адистер тарабынан жүргүзүлүшү керек.
  • Ensure all power sources (PV, battery, AC grid) are disconnected before installation or maintenance.
  • Инверторду ажыратпаңыз. Ичинде колдонуучу тейлей турган тетиктер жок.
  • Avoid exposing the inverter to rain, snow, liquids, or excessive dust.
  • Ашыкча ысып кетүүнүн алдын алуу үчүн инвертордун айланасында туура желдетүүнү камсыз кылыңыз.
  • Connect the inverter to a proper ground.
  • Verify correct polarity when connecting batteries and PV arrays.
  • This inverter is designed for single-phase (120V) output and does not support parallel operation for increased power or split-phase configurations.
Inverter protection features including short circuit, overcurrent, backflow, overload, over-voltage, undervolvoltage, overheating, and overcharge protection.

Figure 2: Inverter Protection Features.

3. Продукциянын өзгөчөлүктөрү

The Aninerel 3600W Solar Inverter Charger offers a range of features for efficient power management:

  • Баары бир дизайн: Combines a 3.6KW pure sine wave inverter, a 40A battery charger, and an 80A MPPT solar charge controller.
  • Жогорку фотоэлектрдик киргизүү: Supports a maximum PV open circuit voltage 300VDC.
  • Батарея шайкештиги: Compatible with 48V AGM/Sealed, Gel, Flooded, and Lithium batteries. Also supports battery-less operation.
  • Flexible Charging Modes: Offers Hybrid Charging, Utility Priority Charging, Solar Priority Charging, and Only Solar Charging.
  • Бир нече чыгаруу режимдери: Includes Utility Priority, Solar and Utility Hybrid, Solar Priority, and Inverter Priority.
  • Time-Slot Function: Allows setting specific charging and discharging periods to optimize energy usage based on local tariffs.
  • Байланыш интерфейстери: Supports CAN, USB, and RS485 for communication with compatible batteries and monitoring systems.
  • Комплекстүү коргоо: Features PV input over-voltage/current protection, AC input over-voltage коргоо, батареянын ашыкча көлөмүtage protection, and overload protection.
Diagram showing inverter features: Battery Compatibility, Grid Connection, Flexible Settings, Wireless Communication.

Figure 3: Key Features of the Aninerel Hybrid Solar Inverter Charger.

4. Продукциянын компоненттери жана порттору

Familiarize yourself with the inverter's components and connection ports before installation.

Diagram labeling the ports and components of the Aninerel solar inverter, including indicator light, LCD screen, touch keys, AC input/output, PV input, battery terminals, communication ports (USB, RS485, CAN, WiFi), and cooling fan.

Figure 4: Inverter Front and Side Panel Overview with Labeled Ports.

  1. Индикатор жарыгы
  2. LCD экран
  3. Touch Keys (ESC, UP, DOWN, ENTER)
  4. Ашыкча жүк коргоочу
  5. Grounding Screw Hold
  6. AC Чыгаруу Порт
  7. Wi-Fi Port (Optional)
  8. AC киргизүү порту
  9. RS485-2 Communication Port
  10. RS485-1 Communication Port
  11. USB байланыш порту
  12. Муздатуу желдеткич
  13. ON/OFF Рокер которуштуруу
  14. Кургак байланыш порту
  15. Current Sharing Port (for parallel module only, not supported by this model)
  16. Parallel Communication Port (for parallel module only, not supported by this model)
  17. Батарея порту
  18. PV порт

Эскертүү: This specific model (ANJ-3600W-LV) does not support parallel operation. Therefore, ports 15 and 16 are not applicable for this unit.

5. Орнотуу жана орнотуу

Туура орнотуу инвертордун иштеши жана коопсуздугу үчүн абдан маанилүү.

5.1 Таңгактан чыгаруу жана текшерүү

  • Open the package and verify all accessories are present as shown in Figure 5.
  • Inspect the inverter for any physical damage. Contact your dealer immediately if any damage is found.
Image showing the Aninerel 3600W Solar Inverter Charger and its accessories: instruction manual, installation toolkit, anti-reverse current CT, and WiFi module.

5-сүрөт: Продукциянын аксессуарлары.

5.2 Инверторду орнотуу

  • Choose a suitable location: indoors, protected from direct sunlight, rain, and dust.
  • Ensure adequate clearance around the inverter for proper airflow (at least 20 cm on all sides).
  • Mount the inverter vertically on a sturdy wall using appropriate fasteners.

5.3 Зымдарды туташтыруу

Follow the wiring diagram carefully. All wiring should be done by a qualified electrician.

Detailed wiring diagram for the Aninerel 3600W Solar Inverter Charger, showing connections for solar panels, batteries, AC input from grid/generator, and AC output to household loads. Includes recommended cable sizes and breaker ratings.

Figure 6: Typical Wiring Diagram.

  • Батарея туташуу: Connect the 48V battery bank to the BAT+ and BAT- terminals. Ensure correct polarity. Recommended cable: 2 AWG/25 mm². Recommended fuse: 150A.
  • Фотоэлектрдик массивдин туташуусу: Connect solar panels to the PV+ and PV- terminals. Max PV input power: 4000W. Max PV open circuit voltage: 300Vdc. MPPT voltage range: 80Vdc-300Vdc. Recommended cable: 10 AWG/6 mm². Connect solar modules in series.
  • AC киргизүү туташуу: Connect the AC grid or generator to the AC Input port. Max AC input voltage: 300VAC. Max AC charging current: 80A. Recommended cable: 10 AWG/6 mm². Recommended breaker: 63A.
  • AC чыгаруу туташуусу: Connect your AC loads to the AC Output port. AC output power: 3600W. AC output voltage: 110V / 120V. Recommended cable: 10 AWG/6 mm². Recommended breaker: 63A.
  • Негиздөө: Connect the grounding screw to a reliable earth ground.

Маанилүү: Double-check all connections before powering on the inverter. Incorrect wiring can cause severe damage.

6. Иштөө нускамалары

Once installed, you can configure and operate your inverter using the LCD display and touch keys.

6.1 Баштапкы кубаттуулук

  1. Ensure all wiring is secure and correct.
  2. Батарея өчүргүчтү күйгүзүңүз.
  3. Turn on the PV array breaker (if connected).
  4. Turn on the AC input breaker (if connected).
  5. Flip the ON/OFF rocker switch on the inverter to the "ON" position.
  6. The LCD screen will light up, and the inverter will perform a self-test.

6.2 LCD дисплей жана жөндөөлөр

Use the ESC, UP, DOWN, and ENTER buttons to navigate the LCD menu and adjust settings. Refer to the detailed manual for specific menu options.

6.3 Charging Priority Modes

These settings determine how your battery bank is charged from available power sources.

Diagram illustrating three charging priority modes: Solar First AC Input Next, Solar and AC Input Simultaneously, and Solar Only.

Figure 7: Charger Source Priority Options.

  • Solar First AC Input Next: Solar panels prioritize charging the battery. AC input charges only if solar power is insufficient.
  • Solar and AC Input Simultaneously: Both solar energy and utility power charge the battery bank at the same time.
  • Күн гана: Solar energy is the exclusive charging source, regardless of AC input availability.

6.4 Output Source Priority Modes

These settings determine which power source the inverter uses to supply connected appliances.

Diagram illustrating three output source priority modes: Solar First, AC First, and Solar and Battery First (DC Priority).

Figure 8: Output Source Priority Options.

  • Күн биринчи: Prioritizes powering appliances from solar. If solar is insufficient, AC input will supplement.
  • Биринчи AC: Redirects AC input to power all appliances and uses solar and batteries only when AC input is unavailable.
  • DC Priority (Solar and Battery First): Prioritizes solar power. If solar is insufficient, the battery bank supplies power. AC input powers only when battery voltage drops to a programmable value.

6.5 Battery Type Configuration

The inverter is compatible with various 48V battery types. Ensure the correct battery type is selected in the settings for optimal charging and discharge management.

Image showing the inverter and a battery, with icons for different battery types: GEL, FLD (Flooded), LI (Lithium), SLD (Sealed), and USE (User-defined).

Figure 9: Supported Battery Types.

  • AGM/Sealed
  • Гель
  • Суу каптады
  • Литий
  • User Mode (for custom battery parameters)

The inverter also supports battery-free operation. For lithium batteries, the shore power and photovoltaic can activate dormant lithium batteries.

7. Wi-Fi Monitoring

The inverter comes with an optional Wi-Fi module for remote monitoring.

Image showing the inverter connected to a Wi-Fi module, with a person monitoring the system on a smartphone app.

Figure 10: Wi-Fi Monitoring Setup.

  • Connect the Wi-Fi module to the designated Wi-Fi port on the inverter.
  • Download the compatible monitoring application to your smartphone or tablet.
  • Follow the app's instructions to register your device and connect it to your local Wi-Fi network.
  • Once connected, you can monitor the inverter's status, energy production, and consumption in real-time from anywhere.

Эскертүү: Refer to the Wi-Fi module's separate instruction guide for detailed setup procedures, as app names and connection steps may vary.

8. Техникалык тейлөө

Үзгүлтүксүз тейлөө сиздин инверторуңуздун узак иштөөсүн жана оптималдуу иштешин камсыздайт.

  • Тазалоо: Periodically clean the inverter's exterior with a dry, soft cloth. Ensure ventilation openings are free from dust and debris.
  • Байланыштары: Жыл сайын бардык электр туташууларынын бекемдигин жана дат басуу белгилерин текшерип туруңуз.
  • Курчап турган чөйрө: Иштөө чөйрөсү белгиленген температуранын жана нымдуулуктун чегинде болушун камсыз кылыңыз.
  • Батареяны текшерүү: Эгерде коргошун-кислоталуу батареяларды колдонсоңуз, электролит деңгээлин жана терминалдардын абалын батарея өндүрүүчүсүнүн көрсөтмөлөрүнө ылайык текшериңиз.

Always disconnect all power sources before performing any maintenance.

9. Кыйынчылыктарды

Бул бөлүмдө кеңири таралган көйгөйлөрдүн чечимдери берилген. Бул жерде көрсөтүлбөгөн көйгөйлөр боюнча кардарларды колдоо кызматына кайрылыңыз.

КөйгөйМүмкүн себепЧечим
Inverter does not power on.Батарея байланышы жок, батареянын көлөмү азtage, ON/OFF switch off, blown fuse/breaker.Батарея байланыштарын жана тtage. Ensure ON/OFF switch is on. Check and replace fuses/reset breakers.
AC кубаттуулугу жок.Overload, short circuit, low battery, inverter fault.Reduce load. Check for short circuits in wiring. Check battery voltage. Consult LCD error codes.
PV not charging batteries.No sunlight, PV array disconnected, incorrect PV voltage, MPPT controller fault.Check sunlight conditions. Verify PV connections and voltage. Ensure PV input is within operating range.
Wi-Fi module not connecting.Incorrect app, poor Wi-Fi signal, incorrect setup steps.Ensure correct app is used. Check Wi-Fi signal strength. Re-follow Wi-Fi module setup instructions carefully.

10. Техникалык шарттар

Key technical specifications for the Aninerel 3600W Solar Inverter Charger (Model ANJ-3600W-LV):

  • Модель аты: ANJ-3600W-LV
  • Номиналдуу чыгаруу кубаттуулугу: 3600 Ватт
  • Эң жогорку күч: 7200 VA
  • Киргизүү көлөмүtage (DC): 48 вольт
  • Output Voltage (AC): 110V / 120V (Single Phase)
  • Макс. PV Open Circuit Voltage: 300 Vdc
  • PV Operating Voltage диапазону: 80 - 300 В туруктуу ток
  • MPPT Voltage диапазону: 90 - 260 В туруктуу ток
  • Max. AC Charging Current: 80A
  • Батарея Voltage диапазону: 40 - 60 В туруктуу ток
  • Элемент Салмагы: 19.36 фунт
  • Пакеттин өлчөмдөрү: 19.57 x 14.17 x 7.09 дюйм
  • Өндүрүүчү: Shenzhen Anenji Energy Technology Co.,Ltd

11. Кепилдик жана колдоо

For warranty information, technical assistance, or customer support, please contact Aninerel directly.

Aninerel customer support contact information: email anenji168@outlook.com and phone +86 188 0375 9233, available PDT: 9AM - 6PM.

Figure 11: Aninerel Customer Support Contact Information.

  • Электрондук почта: anenji168@outlook.com
  • Телефон: +86 188 0375 9233
  • Support Hours (PDT): 9 AM - 6 PM

Please have your model number (ANJ-3600W-LV) and purchase date ready when contacting support.

© 2025 Aninerel. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.