PGST зымсыз үй сигнализация системасы

Introduction

Thank you for choosing the PGST Wireless Home Alarm System. This system is designed to provide reliable security for your home, apartment, or garage with easy DIY installation and smart control via the Tuya or Smart Life application. This manual will guide you through the setup, operation, and maintenance of your alarm system.

Сүрөт: бүттүview of the PGST Wireless Home Alarm System components.

Коопсуздук маалыматы

• Ensure the power supply is stable and matches the device's requirements.
• Аппаратты экстремалдык температурага, нымдуулукка же түз күн нуруна калтырбаңыз.
• Аппаратты күчтүү магнит талаасынан алыс кармаңыз.
• Түзмөктү өз алдынча бөлүктөргө бөлүүгө же оңдоого аракет кылбаңыз. Тейлөө керек болсо, кардарларды колдоо кызматына кайрылыңыз.
• Батареяларды жана электрондук тетиктерди жергиликтүү эрежелерге ылайык таштаңыз.

Пакеттин мазмуну

Пакетиңизде бардык буюмдар бар экенин текшериңиз:

• 1 x Alarm Control Panel (Main Unit)
• Door/Window Contact Sensors
• PIR кыймыл детекторлору
• Remote Controls
• Power Adapter for Control Panel
• Орнотуу жабдуулары (бурамалар, жабышчаак төшөмөлөр)
• User Manual

Сүрөт: Мисample of included components: control panel, motion sensors, door/window sensors, and remote controls.

Жайгашуу

1. Main Control Panel Installation

1. Choose a central location for the control panel, away from direct sunlight and heat sources.
2. Plug the power adapter into the control panel and then into a standard wall outlet.
3. The panel will power on and initiate its startup sequence.

2. Колдонмону жүктөп алуу жана Wi-Fi туташуусу

1. Смартфонуңуздун колдонмолор дүкөнүнөн (iOS же Android) "Tuya Smart" же "Smart Life" тиркемесин жүктөп алыңыз.
2. Каттоо эсебиңизге катталыңыз же сизде мурунтан эле бар болсо кириңиз.
3. Follow the in-app instructions to add a new device. Select "Security & Sensor" and then "Alarm (Wi-Fi)" or a similar option.
4. Ensure your smartphone is connected to a 2.4 GHz Wi-Fi network. The alarm system only supports 2.4 GHz Wi-Fi.
5. Follow the app's prompts to connect the control panel to your home Wi-Fi network.

Image: Smartphone showing real-time alerts from the Smart Life app.

3. Сенсорду орнотуу

The system supports 433MHz wireless signal transmission for sensors.

Image: Illustration of 433MHz wireless signal transmission from sensors to the alarm host.

Эшик/Терезе тийүү сенсорлору:

1. Identify the two parts of the sensor: the main unit and the magnetic strip.
2. Mount the main unit on the door or window frame and the magnetic strip on the moving part (door/window) using the provided adhesive pads or screws.
3. Ensure the two parts are aligned and within 1-2 cm of each other when the door/window is closed.
4. When the door/window opens and the gap exceeds 1-2 cm, the sensor will trigger an alarm.

Image: Door sensor installation, illustrating the 1-2 cm trigger gap.

Image: Working principle of the door sensor alarm, showing closed (no alarm) and separated (alarm) states.

PIR кыймыл детекторлору:

1. Install motion detectors in areas where intruders are likely to pass, such as hallways or living rooms.
2. Mount them at a height of approximately 2-2.5 meters for optimal coverage.
3. Avoid placing them near heat sources, direct sunlight, or areas with strong air currents to prevent false alarms.

Image: Two PIR motion detectors.

4. Pairing Sensors and Remotes

Sensors and remote controls typically come pre-paired. If you need to add new sensors or re-pair existing ones, follow the instructions below or refer to the video tutorial.

To clear existing codes and re-pair a sensor:

Video: Instructions on how to clear existing codes and re-pair a sensor with the alarm system.

1. On the receiver unit, press and hold the 'down arrow' button for 5 seconds to clear the code. The receiver will emit a sound.
2. Press and hold the 'volume' button on the receiver for 5 seconds. The receiver will emit a 'ding' sound, and its indicator light will flash rapidly.
3. Take the detector (e.g., door sensor or motion sensor) and activate it (e.g., separate the door sensor parts or wave your hand in front of the motion sensor) to send a signal to the receiver. The receiver will confirm pairing with a sound.

Системанын иштеши

1. Куралдануу жана куралсыздандыруу

• Кол (Алыскы режим): Press the 'Arm' button on the control panel, remote control, or via the app. All sensors will be active.
• Үйдө калуу режими (Калуу режими): Press the 'Home' button on the control panel, remote control, or via the app. Typically, perimeter sensors (door/window) are active, while internal motion sensors may be inactive to allow movement within the home.
• Куралсыздандыруу: Enter your PIN on the control panel, press the 'Disarm' button on the remote control, or use the app.

Image: Remote control for arming and disarming the system.

2. Эскертүүлөр жана эскертмелер

When a sensor is triggered while the system is armed, the siren will sound (100 dB), and you will receive instant notifications on your smartphone via the Tuya Smart or Smart Life app.

3. Үн менен башкаруу интеграциясы

The system is compatible with Amazon Alexa and Google Assistant. You can arm, disarm, or check the status of your alarm system using voice commands.

• Enable the Tuya Smart or Smart Life skill in your Alexa or Google Home app.
• Link your account and discover devices.
• Use commands like: "Alexa, arm my home" or "Hey Google, disarm the alarm."

Image: Voice control with Alexa and Google Assistant.

4. Customizing Ringtones

You can change the ringtone of your alarm system. Refer to the video below for detailed instructions.

Video: Instructions on how to change the ringtone of the alarm system.

1. On the receiver unit, press the 'up arrow' or 'down arrow' buttons to cycle through and select your preferred ringtone.
2. Press and hold the 'volume' button on the receiver for 5 seconds. The receiver will emit a 'ding' sound, and its indicator light will flash rapidly.
3. Take the detector and activate it to send a signal to the receiver. The receiver will confirm the new ringtone with a sound.

Техникалык тейлөө

1. Батареяны алмаштыруу

Sensors are battery-powered. When a sensor's battery is low, the system will typically notify you via the app. Replace batteries promptly to ensure continuous protection.

• Refer to the specific sensor model for battery type (e.g., CR2032, AAA).
• Сенсорду кылдаттык менен ачыңыз casing, replace the old battery with a new one, ensuring correct polarity.
• в жабууasing коопсуз.

2. Тазалоо

Wipe the control panel and sensors with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these can damage the device.

Проблемаларды чечүү

• Система Wi-Fi'га туташпай жатат: Ensure your Wi-Fi network is 2.4 GHz. Check Wi-Fi password and signal strength. Restart the control panel and try again.
• Сенсор сигнализацияны иштетпей жатат: Check sensor battery. Ensure the sensor parts are within the recommended distance (1-2 cm for door/window sensors). Re-pair the sensor if necessary (refer to the 'Clearing codes and re-pairing' video in the Setup section).
• Жалган сигналдар: For motion detectors, ensure they are not placed near heat sources, vents, or in direct sunlight. Adjust sensitivity settings if available.
• Колдонмо эскертмелери алынган жок: Check your phone's notification settings for the Tuya Smart/Smart Life app. Ensure the app is running in the background and has internet access.

Техникалык шарттар

Кепилдик жана колдоо

PGST products are certified EN 50131 and come with a 3-year warranty. For technical assistance or warranty claims, please contact PGST customer support.

• Батареянын камдык көчүрмөсү: The system includes a 24-hour battery backup. An optional PGST-PWR100 battery can extend this to 72 hours.
• Сенсор диапазону: Up to 150m in open areas, 50m in urban environments.
• Dual-Band Frequency: Sensors operate on 868 MHz / 2.4 GHz to minimize interference.
• Кеңейтүү: The system is expandable with additional sensors.
• Энергияны керектөө: Approximately 3 W/h in standby mode.

For further assistance, consult the digital manual available in 8 languages via the app or visit the official PGST webсайт.