SHINYSNAKE L300 Ultra-Compact ITX Case Instruction Manual

1. Киришүү

The SHINYSNAKE L300 is an 8.5L ultra-compact vertical ITX chassis designed for high-performance computing in a small form factor. It features high airflow mesh side panels, support for dual-slot GPUs up to 325mm, and includes a special-designed PCIe Riser 4.0 cable and a DisplayPort 1.4 cable. Its portable design with an integrated handle makes it suitable for various environments.

Figure 1: SHINYSNAKE L300 Ultra-Compact ITX Case (Black)

2. Пакеттин мазмуну

Verify all components are present before proceeding with installation:

• 1 x SHINYSNAKE L300 ITX Chassis
• 1 x PCI-e 4.0 Riser Cable
• 1 x DP 1.4 Cable (4K@120Hz)
• 1 x Steel Handle
• 1 x Орнотуу боюнча колдонмо

Figure 2: Included accessories with the L300 chassis.

3. Техникалык шарттар

Figure 3: L300 Case Dimensions.

4. Компоненттин шайкештиги

4.1 Graphics Processing Unit (GPU)

The L300 chassis supports dual-slot GPUs with a maximum length of 325mm. Ensure your GPU dimensions are within these limits for proper fitment and airflow.

Figure 4: Maximum GPU length supported (325mm).

4.2 Энергия менен камсыздоо блогу (PSU)

Compatible with SFX and SFX-L form factor power supplies. Proper orientation of the PSU fan is crucial for optimal thermal performance. Refer to the installation section for guidance.

4.3 Motherboard

Supports Mini ITX motherboards only.

4.4 Муздатуу желдеткичтери

The chassis supports two 120x15mm ultra-slim fans for optimized airflow. One fan can be mounted at the top and one at the bottom. These fans are not included with the chassis.

Figure 5: Fan mounting locations (1x top, 1x side/bottom).

4.5 CPU муздаткычы

The L300 case supports low-profile CPU coolers with up to 60mm clearance.

Figure 6: CPU cooler clearance (60mm).

4.6 Сактоо

The chassis includes mounts for 2.5" HDD/SSD drives, allowing for storage expansion without compromising portability.

Figure 7: 2.5" SSD mounting location.

5. Орнотуу жана орнотуу

Follow these steps to assemble your SHINYSNAKE L300 ITX case and install your components. It is recommended to watch the full installation video for a comprehensive guide.

5.1 Watch the Installation Guide Video

Video 1: SHINYSNAKE L300 Installation Guide. This video provides a step-by-step visual walkthrough of the assembly process.

5.2 Шассини даярдоо

1. Remove the side panels by unscrewing the retaining screws on the rear of the chassis. Gently slide and lift the panels away.
2. Remove any pre-installed fan brackets if necessary for your build configuration.
3. Install the steel handle onto the top of the chassis using the provided screws. Ensure it is securely fastened before installing the motherboard.

5.3 Motherboard орнотуу

1. Install your CPU, CPU cooler (if air cooler), and RAM onto the Mini ITX motherboard outside the chassis.
2. Pre-route the CPU 8-pin power cable through the top of the chassis towards the PSU compartment.
3. Carefully place the assembled motherboard into the chassis, aligning it with the standoffs. Secure the motherboard with screws.
4. Connect the 24-pin ATX power cable to the motherboard.
5. Connect the front I/O cables (USB 3.0, Type-C, Audio, Power Switch) to their respective headers on the motherboard. Use cable ties to manage these cables neatly.

5.4 PCIe Riser and GPU Installation

1. Install the provided PCIe 4.0 riser cable into the motherboard's PCIe slot. Secure it with screws to the chassis.
2. Pre-route the GPU power cables from the PSU compartment to the GPU installation area.
3. Connect the GPU discrete power supply cables to your graphics card first.
4. Carefully insert your GPU into the PCIe riser cable slot. Ensure it is fully seated.
5. Install and secure the PCIe bracket to stabilize the GPU.

Figure 8: PCIe Riser Cable Installation.

5.5 PSU Installation

1. Connect all necessary modular cables to your SFX/SFX-L PSU.
2. Slide the PSU into its designated compartment. Secure it with screws from the rear of the chassis.
3. Connect the PSU extension cable to the power supply.
4. Ensure the PSU fan is oriented correctly to draw in fresh air (typically facing outwards or towards the mesh panel). Incorrect orientation can lead to increased fan noise and higher temperatures.

5.6 Кабелди башкаруу

Utilize the provided cable ties to neatly manage all internal cables. Proper cable management improves airflow and aesthetics. Ensure no cables obstruct fan blades or critical components.

5.7 Жыйынтыктоочу Ассамблея

1. Reattach the side panels by aligning them and sliding them into place. Secure them with the retaining screws.
2. Connect the DisplayPort 1.4 cable to your GPU.

Figure 9: Connecting the DisplayPort 1.4 cable.

6. Иштөө нускамалары

After completing the assembly, connect your monitor, keyboard, mouse, and power cable. Press the power button on the front I/O panel to start your system. The mesh panels are designed for optimal airflow, ensuring components remain cool during operation.

Figure 10: Front I/O ports including power button, USB 3.0, and Type-C.

7. Техникалык тейлөө

• Тазалоо: Regularly clean the mesh panels with a soft brush or compressed air to prevent dust buildup and maintain optimal airflow.
• Компонентти текшерүү: Periodically inspect internal components for dust and ensure all connections are secure.
• Көчүрүү мүмкүнчүлүгү: When transporting the case using the steel handle, ensure all internal components are securely fastened to prevent damage.

8. Кыйынчылыктарды

• Кубат жок:
  • Кубат кабели PSUга жана розеткага бекем туташтырылганын текшериңиз.
  • PSU которгучу 'ON' абалында экенин текшериңиз.
  • Check all internal power connections (24-pin ATX, CPU 8-pin, GPU power).
• Дисплей жок:
  • Confirm the DisplayPort 1.4 cable is securely connected to the GPU and monitor.
  • Ensure the GPU is fully seated in the PCIe riser.
• Жогорку температуралар/Каттуу желдеткичтер:
  • Verify PSU fan orientation is correct (facing outwards/towards mesh).
  • Ensure all cooling fans are properly installed and functioning.
  • Check for dust buildup on mesh panels and component heatsinks.
  • Confirm CPU cooler is correctly mounted with thermal paste applied.

9. Кепилдик жана колдоо

For warranty information or technical support, please refer to the SHINYSNAKE official webсайтка же сатуучуга кайрылыңыз. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.

SHINYSNAKE also offers free 1-on-1 compatibility checks. Send your component specifications (GPU model, motherboard type, PSU, etc.) for optimization tips to ensure a smooth build process.