MeesMeek ички термометр гигрометр сааты модели 5275 Колдонуучунун колдонмосу

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your MeesMeek Indoor Thermometer Hygrometer Clock Model 5275. This device accurately measures indoor temperature and humidity, displays time and date, and features a comfort level indicator and backlight for enhanced readability. Please read this manual thoroughly before using the product to ensure proper function and longevity.

Кутуда эмне бар

• MeesMeek Thermometer Hygrometer Unit x 1
• AAA батареялары x 2
• Колдонуучунун колдонмосу x 1

Продукт өзгөчөлүктөрү

• Accurate Readings with Calibration: Equipped with advanced sensors, pre-calibrated for accuracy of ±2°F and ±3% RH. User calibration function available.
• Интуитивдик LCD дисплей: A 3.7-inch screen shows current temperature, humidity, Max/Min records, air comfort indicator, clock time, and date.
• Touch-Controlled Backlight: A 15-second backlight for easy reading in low-light conditions.
• 24-Hour Max/Min Records: Automatically tracks and resets daily high/low temperature and humidity. Manual reset option available.
• Абанын ыңгайлуулугунун көрсөткүчү: A 3-color, 9-level bar visually represents air comfort (Dry, Comfort, Wet).
• Ар тараптуу орнотуу параметрлери: Features a foldable kickstand for tabletop use and a hanging hook for wall mounting.
• Тандалган бирдиктер: Easily switch between °F/°C for temperature and 12H/24H for time format.

Сүрөт: алдыңкы view of the MeesMeek Indoor Thermometer Hygrometer Clock, displaying temperature, humidity, Max/Min records, comfort level, time, and date.

Жайгашуу

1. Батареяны орнотуу

1. Аппараттын артындагы батарея бөлүкчөсүн табыңыз.
2. Open the battery cover. (Note: The kickstand may need to be pulled out to access the cover.)
3. Туура полярдуулукту (+/-) камсыз кылып, эки (2) AAA батарейкасын салыңыз.
4. Батареянын капкагын бекем жабыңыз.

Сүрөт: Арткы view of the device, highlighting the battery cover, foldable kickstand, and control buttons.

2. Initial Settings (Time, Date, Temperature Unit)

After battery installation, the device will power on. Use the buttons on the back to configure settings.

• Убакытты жана датаны коюу: Press the "SET" button to enter time/date setting mode. Use the "+" and "-" buttons to adjust values. Press "SET" again to confirm each setting (Hour, Minute, Year, Month, Day).
• Selecting Temperature Unit (°F/°C): Press the "°F/°C" button to toggle between Fahrenheit and Celsius.
• Selecting Time Format (12H/24H): While in time setting mode, press the "°F/°C" button to switch between 12-hour and 24-hour formats.

Image: Close-up of the display showing the time and date, illustrating the clarity of the digits.

Image: Visual representation of switching between Fahrenheit and Celsius temperature units on the display.

3. Аппаратты орнотуу

• Столдун үстүнө жайгаштыруу: Pull out the foldable kickstand on the back of the device to stand it on a flat surface.
• Дубалга орнотуу: Use the integrated hanging hook on the back to mount the device on a nail or screw on a wall.

Image: The device shown in two mounting configurations: standing on a table with its kickstand and hanging on a wall using its hook.

Иштөө нускамалары

1. Дисплейди окуу

The large LCD screen provides the following information:

• Учурдагы температура: Large digits at the top.
• Учурдагы нымдуулук: Large digits in the middle.
• МАКС/МИН жазуулар: Small digits next to temperature and humidity, showing the highest and lowest values recorded within the last 24 hours.
• Абанын ыңгайлуулугунун көрсөткүчү: A colored bar indicating Dry, Comfort, or Wet conditions.
• Убакыт жана дата: Displayed at the bottom.

2. Арткы жарык функциясы

To activate the backlight, gently touch the light bulb icon at the bottom center of the front panel. The backlight will illuminate for 15 seconds and then automatically turn off to conserve battery life.

Image: Comparison of the device display with the backlight off (left) and on (right), demonstrating improved visibility in dim conditions.

3. Max/Min Records

The device automatically records the maximum and minimum temperature and humidity values over a 24-hour period. These records reset automatically at 00:00 (12:00 AM) daily, based on the device's set time. To manually reset the Max/Min records, press and hold the "CLEAR" button on the back of the device.

4. Air Comfort Indicator

The colored bar on the display provides a quick visual reference for indoor air comfort levels:

• DRY (Orange): 30% төмөн нымдуулук
• COMFORT (Green): 30% жана 69% ортосундагы нымдуулук
• WET (Blue): Humidity 70% or above

Image: The display showing the air comfort indicator bar, segmented into Dry, Comfort, and Wet zones with corresponding humidity percentages.

5. Калибрлөө функциясы

The device is pre-calibrated, but you can fine-tune the temperature and humidity readings if needed. To enter calibration mode, press and hold both the "+" and "-" buttons simultaneously for a few seconds. Use the "+" and "-" buttons to adjust the temperature or humidity offset. Press "SET" to switch between temperature and humidity calibration, and again to confirm and exit calibration mode.

Image: Illustration of the calibration process, showing the device being compared to other measurement tools for accuracy adjustment.

Техникалык тейлөө

• Тазалоо: Түзмөктү жумшак, кургак чүпүрөк менен сүртүңүз. Абразивдүү тазалоочу каражаттарды колдонбоңуз же сууга салбаңыз.
• Батареяны алмаштыруу: Replace batteries when the low battery indicator appears on the display. Always use new AAA batteries.
• Сактагыч: Аппаратты узак убакытка сактасаңыз, агып кетпеш үчүн батарейкаларды алып салыңыз.
• Курчап турган чөйрө: Avoid placing the device in direct sunlight, near heat sources, or in areas with extreme temperature fluctuations or high humidity (e.g., bathrooms, saunas) to ensure accurate readings and prolong device life.

Проблемаларды чечүү

• Дисплей бош же окулбайт:
  • Батареялардын туура орнотулганын жана полярдуулук туура экенин текшериңиз.
  • Эски батареяларды жаңы AAA батареялары менен алмаштырыңыз.
  • Батарея капкагы бекем жабылганын текшериңиз.
• Температуранын/нымдуулуктун так эмес көрсөткүчтөрү:
  • Allow the device to acclimate to the room for at least 30 minutes after initial setup or relocation.
  • Ensure the device is not placed near heat sources, direct sunlight, or vents that could affect readings.
  • Use the calibration function to adjust readings if you have a known accurate reference.
• Арткы жарык иштебейт:
  • Ensure batteries have sufficient power. Replace if necessary.
  • Gently touch the light bulb icon on the front panel.
• Max/Min records not resetting:
  • Records automatically reset at midnight. To manually reset, press and hold the "CLEAR" button on the back.

Техникалык шарттар

Кепилдик жана колдоо

For warranty information, technical support, or customer service inquiries, please refer to the product packaging or visit the official MeesMeek webсайт. Кепилдик дооматтары үчүн сатып алуу дүмүрчөгүңүздү сактаңыз.