1. Киришүү
Thank you for choosing the FLITI AMS193 Motion Sensor Solar Security Lights. This product is designed to provide efficient and reliable outdoor lighting using solar power, featuring adjustable heads, a sensitive motion sensor, and a durable waterproof design. Please read this manual carefully before installation and use to ensure optimal performance and safety.
2. Коопсуздук маалыматы
- Ensure the product is installed in a location that receives direct sunlight for at least 6-8 hours daily to ensure proper charging.
- Do not disassemble or modify the product. Unauthorized modifications may cause damage and void the warranty.
- Продукцияны оттон же жогорку температурадан алыс кармаңыз.
- Avoid direct eye exposure to the bright LED light.
- Батареяларды жана электрондук компоненттерди жергиликтүү эрежелерге ылайык жок кылыңыз.
- This product is IP65 waterproof, suitable for outdoor use in various weather conditions, but avoid submerging it in water.
3. Пакеттин мазмуну
Сураныч, бардык буюмдар бар экенин текшерүү үчүн пакетти текшериңиз:
- FLITI AMS193 Solar Security Light Unit (x2)
- Монтаждоо кронштейни (x2)
- Screws and Wall Plugs (x4 sets)
- Колдонуучунун колдонмосу (x1)
4. Продукциянын өзгөчөлүктөрү
- Супер жаркыраган жарыктандыруу: Equipped with 229 high-quality LED beads, providing up to 2500 lumens of 6500K bright white light.
- Wider Lighting Area: Features 3 independently adjustable lamp heads and a rotatable solar panel, allowing for omnidirectional and multi-angle lighting coverage up to 120 degrees.
- Ultra-Sensitive Motion Sensor: An upgraded infrared digital motion sensor detects movement up to 12 meters (39 feet) within a 120-degree angle, activating the light quickly at night.
- IP65 Суу өткөрбөйт: Durable construction ensures reliable operation in various outdoor weather conditions, including rain and snow.
- Solar Powered & Wireless: Environmentally friendly and easy to install without the need for electrical wiring.
Image: Key features of the FLITI AMS193 solar light, including sensing distance, operating modes, and waterproof rating.
Image: High-quality LED beads and brightness comparison.
Image: IP65 Waterproof feature in action during rain.
5. Орнотуу жана орнотуу
The FLITI AMS193 solar security light is designed for quick and simple wireless installation.
5.1 Орнотуу ордун тандоо
- Select a location that receives direct sunlight for at least 6-8 hours per day to ensure the solar panel can fully charge the battery.
- Avoid areas under eaves, trees, or other obstructions that might block sunlight or motion sensor detection.
- Mount the light at a height of approximately 2-3 meters (6.5-10 feet) for optimal motion detection and light coverage.
5.2 Монтаждоо кадамдары
- Mark the desired installation position on the wall.
- Белгиленген жерлерде эки тешик бургула.
- Бургуланган тешиктерге дубал сайгычтарды салыңыз.
- Берилген бурамалар аркылуу монтаждык кронштейнди дубалга бекитиңиз.
- Slide the solar light unit onto the mounting bracket until it clicks securely into place.
Image: Installation steps for mounting the solar light.
5.3 Adjusting Light Heads and Solar Panel
The solar panel and the three lamp heads can be rotated independently to customize lighting direction and solar charging angle.
- Adjust the solar panel to face direct sunlight for maximum charging efficiency.
- Angle the three lamp heads to cover your desired lighting areas, such as pathways, doorways, or garden sections.
Image: Flexible rotation design of the solar panel and light heads.
6. Иштөө нускамалары
The FLITI AMS193 features three distinct operating modes, selectable via a button on the back of the unit.
6.1 Алгачкы заряддоо
Before first use, allow the solar light to charge in direct sunlight for at least 8-10 hours to ensure the battery is fully charged.
Image: Solar light charging during the day and activating at night.
6.2 Режимди тандоо
Press the power button on the back of the unit to cycle through the following modes:
- Mode 1 (Motion Sensor Mode): The light remains off until motion is detected. When motion is sensed, the light turns on at full 2500LM brightness for approximately 20 seconds, then turns off after motion ceases.
- Mode 2 (Dim to Sensor Mode): The light automatically turns on at dusk at a low brightness (approx. 200LM). When motion is detected, it switches to full 2500LM brightness for approximately 20 seconds, then returns to dim brightness after motion ceases. After 6 hours of operation, it automatically switches to Mode 1.
- Mode 3 (Always On Mode): The light automatically turns on at dusk at a medium brightness (approx. 500LM) and stays on continuously. After 4 hours of operation, it automatically switches to Mode 1.
Image: Visual representation of the three operating modes.
7. Техникалык тейлөө
Regular maintenance ensures the longevity and optimal performance of your solar lights.
- Таза күн панели: Мезгил-мезгили менен күн панелин жумшак, гamp чаңды, кирди же таштандыларды кетирүү үчүн кездеме. Таза панель күн нурун максималдуу сиңирүүнү жана заряддоонун натыйжалуулугун камсыз кылат.
- Батареяны алмаштыруу: The unit uses rechargeable batteries. If the light's performance significantly decreases over time, the batteries may need replacement. Access the battery compartment by removing the plate cover. Ensure to replace with compatible rechargeable batteries.
- Зыянды текшерүү: Regularly check the light for any physical damage, loose connections, or signs of wear.
8. Кыйынчылыктарды
If you encounter issues with your FLITI AMS193 solar lights, refer to the following common problems and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Түнкүсүн жарык күйбөйт. | Заряддоо үчүн күн нуру жетишсиз. Switch is off or in incorrect mode. Battery depleted or faulty. | Күн панелинин күнүнө 6-8 саат түз күн нуру тийип турушун камсыз кылыңыз. Check the operating mode and ensure it's set correctly (Mode 1, 2, or 3). Allow several days of charging. If issue persists, consider replacing the rechargeable battery. |
| Жарык күңүрт же кыска убакытка гана күйүп турат. | Кубаттоо жетишсиз. Кир күн панели. Эскирген батарея. | Жарыкты күн нуру көбүрөөк тийген жерге жылдырыңыз. Күн панелин үзгүлтүксүз тазалаңыз. Replace the rechargeable battery if it's old. |
| Motion sensor is not working or too sensitive. | Сенсор тоскоол болгон. Incorrect mounting height/angle. Environmental factors (e.g., strong winds, heat sources). | Сенсордун линзасы таза жана тоскоолдуксуз экенин текшериңиз. Adjust the mounting height and angle for optimal detection. Consider relocating if false triggers are frequent due to environmental factors. |
Эгерде бул чечимдер көйгөйдү чечпесе, кардарларды колдоо кызматына кайрылыңыз.
9. Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Модель номери | AMS193 |
| Бренд | FLITI |
| Жарык булагы | 229 LED мончоктор |
| Жарыктык | 2500 люменге чейин |
| Түс температурасы | 6500 Келвин (Муздак Ак) |
| Кыймыл сенсорунун диапазону | 12 метрге чейин (39 фут) |
| Motion Sensor Angle | 120 градус |
| Суу каршылык | IP65 суу өткөрбөйт |
| Power Source | Күн энергиясы |
| Материал | Пластик |
| Монтаж түрү | Дубалга орнотуу |
| Light Heads саны | 3 (Жөнгө салынуучу) |
10. Кепилдик жана колдоо
Өндүрүүчүнүн Кепилдиги: This product comes with a 2-year manufacturer warranty from the date of purchase, covering defects in materials and workmanship under normal use.
Эмне камтылган: Материалдык жана жасалгалоодогу кемчиликтер.
Эмне камтылган эмес: Damage caused by improper installation, misuse, abuse, accidents, unauthorized repairs or modifications, or normal wear and tear.
Кардарларды колдоо: For warranty claims, technical assistance, or any questions regarding your FLITI AMS193 solar lights, please contact your retailer or the manufacturer's customer service through the contact information provided at the point of purchase.