Окин JLDQ.18.137.333D01
Okin JLDQ.18.137.333D01 Power Recliner Motor Replacement Manual
Model: JLDQ.18.137.333D01
Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the Okin JLDQ.18.137.333D01 motor, designed as a replacement part for power recliner lift chairs. Please read this manual thoroughly before attempting any installation or operation to ensure safe and correct usage.
Коопсуздук маалыматы
- Always disconnect power to the recliner before attempting any installation, removal, or maintenance of the motor. Failure to do so can result in electric shock or injury.
- Кубатты калыбына келтирүүдөн мурун бардык туташуулардын коопсуз жана туура багытталганын текшериңиз.
- This motor is designed for specific power recliner lift chairs. Verify compatibility with your existing recliner model before installation.
- Иштөө учурунда колдоруңузду жана кенен кийимдериңизди кыймылдуу бөлүктөрдөн алыс кармаңыз.
- Эгер кандайдыр бир кадамга ишенбесеңиз, квалификациялуу техникке кайрылыңыз.
Пакеттин мазмуну
Пакет төмөнкү нерселерди камтыйт:
- 1 x Okin JLDQ.18.137.333D01 Refined Motor

Image: The Okin JLDQ.18.137.333D01 motor assembly, showing the main motor unit, linear actuator rod, and attached power and control cables.
Продукт бүттүview
The Okin JLDQ.18.137.333D01 is a linear actuator motor designed for power recliner and lift chair applications. It features a robust construction and specific connection types for integration into existing systems.

Сүрөт: жакын план view of the motor's identification label, displaying the model number JLDQ.18.137.333D01, voltage, maximum load, stroke, duty cycle, and various certifications (CE, cURus, TÜV Rheinland, FCC).
Туташуу түрлөрү:
- Power Transformer Connection: 2-pin flat round male plug. This connects to the power supply unit.
- Hand Control Connection: 5-pin female plug. This connects to the recliner's hand control unit.

Сүрөт: деталдуу view of the motor's connection cables, highlighting the 5-pin female plug for the hand control and the 2-pin flat round male plug for the power transformer connection.
Орнотуу жана орнотуу
This section outlines the general steps for replacing an existing recliner motor. Always refer to your recliner's specific manual for detailed disassembly and assembly instructions.
- Кубатты өчүрүү: Unplug the recliner from the wall outlet to ensure no power is supplied to the motor or controls.
- Моторго кирүү: Carefully turn the recliner over or tilt it to gain access to the underside where the motor is located. You may need to remove fabric covers or panels.
- Байланыштарды аныктоо: Note the connections of the existing motor. Typically, there will be a power connection from the transformer and a control connection from the hand remote.
- Эски моторду ажыратыңыз: Disconnect the 2-pin power plug and the 5-pin hand control plug from the old motor.
- Эски моторду алып салуу: Unbolt or unclip the old motor from the recliner frame. Pay attention to how it is mounted.
- Жаңы мотор орнотуу: Position the new Okin JLDQ.18.137.333D01 motor in the same location as the old one. Secure it using the existing bolts or clips. Ensure it is firmly attached.
- Жаңы моторду туташтыруу:
- Connect the 2-pin flat round male plug from the power transformer to the corresponding port on the new motor.
- Connect the 5-pin female plug from the hand control to the corresponding port on the new motor.
- Кабелдик башкаруу: Route all cables safely, ensuring they are not pinched or in the way of moving parts. Use cable ties if necessary.
- Күчтү калыбына келтирүү: Once all connections are secure and the motor is properly mounted, plug the recliner back into the wall outlet.
- Сыноо операциясы: Use the hand control to test the recliner's functions (recline, lift). Ensure smooth and correct movement.
Эскертүү: Before replacing the motor, always troubleshoot the switch and power supply first. Verify that the new motor's plug types match your recliner's connections.
Иштөө нускамалары
After successful installation, operate your recliner using the existing hand control unit. The Okin JLDQ.18.137.333D01 motor will respond to the commands from your hand control to adjust the recliner's position.
- Отургучту чалкалатып же көтөрүү үчүн колуңузду башкаруу панелиндеги тиешелүү баскычты басып, кармап туруңуз.
- Керектүү абалга жеткенде баскычты бошотуңуз.
- Avoid continuous operation for extended periods. The motor has a duty cycle of 1 minute ON / 8 minutes OFF to prevent overheating.
Техникалык тейлөө
Proper maintenance ensures the longevity and reliable operation of your Okin motor.
- Тазалоо: Keep the motor and surrounding area free from dust and debris. Use a dry cloth to wipe down the motor housing. Do not use liquid cleaners directly on the motor.
- Текшерүү: Periodically inspect all cables and connections for signs of wear, fraying, or damage. Ensure all mounting bolts are tight.
- Майлоо: The linear actuator rod is typically pre-lubricated. If you notice stiffness or unusual noise, a light application of silicone-based lubricant (avoid petroleum-based products) to the moving rod may be beneficial, but consult a professional if unsure.
- Duty Cycle Adherence: Respect the motor's duty cycle (1 minute ON / 8 minutes OFF) to prevent overheating and premature wear.
Проблемаларды чечүү
If your recliner is not operating correctly after motor replacement, consider the following common issues:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Мотор жооп бербейт. | No power, loose connections, faulty hand control, faulty power supply. |
|
| Motor operates slowly or with difficulty. | Low power, obstruction, motor overload, worn components. |
|
| Мотордон адаттан тыш үндөр. | Lack of lubrication, foreign object, internal motor issue. |
|
Эгерде көйгөйдү чечүү кадамдары көйгөйдү чечпесе, кошумча жардам алуу үчүн кардарларды колдоо кызматына кайрылыңыз.
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модель номери | JLDQ.18.137.333D01 |
| Колдонмо | Power Recliner Lift Chairs |
| Stroke Length | 333 мм (13.11 дюйм) |
| Минималдуу орнотуу өлчөмү (кичирейтүү) | 137 мм (5.40 дюйм) |
| Максималдуу орнотуу өлчөмү | 470 мм (18.5 дюйм) |
| Жүк (Түртүү күчү) | 750 Н |
| Жүк (тартуу күчү) | 750 Н |
| Power Transformer Connection | 2 Pin Flat Round Male Plug |
| Кол менен башкаруу туташуусу | 5 Pin Female Plug |
| Милдеттик цикл | 1 мүнөт КҮЙҮК / 8 мүнөт ӨЧҮРҮҮ |
| Элемент Салмагы | 4.79 фунт |
| Пакеттин өлчөмдөрү | 23.5 x 8.5 x 6 дюйм |

Image: A graphic summarizing the key product features and specifications, including stroke length, minimum and maximum dimensions, and connection types, alongside an image of the motor.
Кепилдик жана колдоо
For warranty information or technical support regarding your Okin JLDQ.18.137.333D01 motor, please refer to the documentation provided with your original recliner or contact Okin customer service directly. You can often find support contact information on the manufacturer's webсайты же продукт сатуучу аркылуу.
Патент жөнүндө маалымат алуу үчүн, кириңиз dewertokin.com/patents.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.