JBL JBL STAGE2 GEN2 965M

JBL Stage2 GEN2 965M 6x9-inch 3-Way Car Speakers Instruction Manual

Модель: JBL STAGE2 GEN2 965M | Brand: JBL

Introduction

JBL Stage2 GEN2 965M are 6x9-inch (152x229mm) 3-way car speakers designed to deliver a rich and balanced audio experience. This system features a Plus One™ woofer, a dedicated midrange driver, and a tweeter, providing full-range sound reproduction. With a power handling of 70 watts RMS and 210 watts peak, these speakers are suitable for various car audio setups, offering a significant upgrade over factory-installed speakers.

Бул колдонмо JBL S түзмөгүңүздү туура орнотуу, иштетүү жана техникалык тейлөө боюнча маанилүү маалыматтарды берет.tage2 GEN2 965M speakers.

Кутуда эмне бар

Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:

  • 2 x JBL Stage2 GEN2 965M Speakers
  • 2 x Динамик торлору
  • 8 x Монтаждоо бурамалар
  • 8 x ылдамдыктагы клиптер
  • 2 x Көбүктүү прокладкалар
  • 1 х Инструкция (бул документ)
JBL Stage2 GEN2 965M speakers and grilles in retail packaging

Image: Contents of the JBL Stage2 GEN2 965M speaker package, showing two speakers, two grilles, and mounting hardware.

Орнотуу жана орнотуу

Proper installation is crucial for optimal performance. If you are unsure about any steps, consult a professional car audio installer.

1. Пландоо жана даярдоо

  • Биринчи коопсуздук: Кандайдыр бир электр иштерин баштоодон мурун унаанын терс батарея терминалын ажыратыңыз.
  • Динамиктин жайгашкан жери: These 6x9-inch speakers are designed for rear deck or door panel installations where a 6x9-inch opening is available.
  • Жөндөөнү текшерүү: Ensure the speakers will fit in your desired location. Refer to the dimensions diagram below.
  • Керектүү куралдар: Сизге бурагычтар, зым чечкичтер, кыскычтар жана, балким, бургу сыяктуу негизги кол шаймандары керек болот.
JBL S үчүн өлчөмдөрү көрсөтүлгөн техникалык чиймеtage2 GEN2 965M speakers

Image: Detailed technical drawing showing the dimensions of the JBL Stage2 GEN2 965M speaker, including mounting depth and overall size.

2. Removing Existing Speakers (if applicable)

  • Carefully remove the grilles and mounting screws of your existing speakers.
  • Disconnect the speaker wires, noting the positive (+) and negative (-) terminals.

3. Динамиктердин зымдары

  • Connect the positive (+) speaker wire from your amplifier/head unit to the positive (+) terminal on the JBL speaker.
  • Connect the negative (-) speaker wire from your amplifier/head unit to the negative (-) terminal on the JBL speaker.
  • Ensure connections are secure and properly insulated to prevent short circuits.
JBL Stage2 GEN2 965M speaker without grille, showing terminals

Сүрөт: алдыңкы view JBL Stage2 GEN2 965M speaker without its grille, highlighting the speaker cone and connection terminals.

4. Баяндамачыларды орнотуу

  • Place the foam gasket (if desired for improved seal) around the speaker frame.
  • Position the speaker into the mounting opening.
  • Secure the speaker using the provided mounting screws and speed clips. Do not overtighten.
  • Attach the speaker grilles (if desired) over the installed speakers.
JBL Stage2 GEN2 965M speaker with grille installed

Сүрөт: алдыңкы view JBL Stage2 GEN2 965M speaker with the protective grille in place.

5. Акыркы кадамдар

  • Унаанын терс батарея терминалын кайра туташтырыңыз.
  • Test the speakers with your car audio system.

Иштөө нускамалары

Орнотулгандан кийин, сиздин JBL Stage2 GEN2 965M speakers operate as part of your car's audio system. They are designed to work with a car radio or ampөмүрлүү.

  • Кубат менен иштөө: These speakers can handle up to 70W RMS (Root Mean Square) continuous power and 210W Peak power. Ensure your amplifier's output does not consistently exceed these limits to prevent damage.
  • Импеданс: The speakers have a 4-ohm impedance. Ensure your amplifier is stable at this impedance.
  • Аудио булагы: Play audio from your car's head unit (radio, CD player, Bluetooth, AUX, RCA) or external ampөмүрлүү.
  • Үндү көзөмөлдөө: Adjust the volume gradually. Avoid playing audio at excessively high volumes for extended periods, which can cause distortion and speaker damage.
  • Тон көзөмөлү: Use your head unit's or amplifier's tone controls (bass, treble, balance, fader) to fine-tune the sound to your preference.

Техникалык тейлөө

JBL S түзмөгүңүздүн узак иштөөсүн жана оптималдуу иштешин камсыз кылуу үчүнtage2 GEN2 965M speakers, follow these simple maintenance guidelines:

  • Тазалоо: Динамиктин торчолорун жана айланасын жумшак, кургак чүпүрөк менен акырын сүртүңүз. Катуу химиялык заттарды же абразивдүү тазалоочу каражаттарды колдонуудан алыс болуңуз.
  • Нымдуулук: Бул динамиктер суу өткөрбөйт. Avoid exposing them to direct water, excessive humidity, or spills. If they get wet, allow them to dry completely before use.
  • Физикалык зыян: Protect the speaker cones from physical impact or punctures. The grilles provide some protection, but care should still be taken.
  • Экологиялык шарттар: While designed for automotive use, extreme temperatures (very hot or very cold) can affect speaker performance and lifespan.

Проблемаларды чечүү

Эгерде сиз динамиктериңизде көйгөйлөргө туш болсоңуз, төмөнкү жалпы көйгөйлөрдү чечүү кадамдарын караңыз:

КөйгөйМүмкүн себепЧечим
Динамиктерден үн жок
  • Бошоң же туура эмес зым байланыштары.
  • Ampкөтөргүч/башкы блок күйгүзүлгөн эмес же бузулган.
  • Аудио булагы маселеси.
  • Динамик бузулган.
  • Динамиктин жана динамиктин бардык зымдарын текшериңиз amplifier/head unit. Ensure correct polarity (+ to + and - to -).
  • Текшериңиз amplifier/head unit is receiving power and functioning correctly.
  • Башка аудио булагы менен сынап көрүңүз.
  • If other speakers work, the specific speaker might be faulty and require replacement.
Бурмаланган же түшүнүксүз үн
  • Көлөмү өтө жогору, бул кесүүгө алып келет.
  • Туура эмес ampкөтөрүүчү пайда орнотуулары.
  • Loose speaker cone or surround.
  • Сапаты начар аудио булагы.
  • Үнүн азайтыңыз.
  • Тууралоо amplifier gain settings according to the ampкөтөргүчтүн колдонмосу.
  • Динамиктин конусун жана айланасын көрүнгөн бузулуулар жок экендигин текшериңиз.
  • Try a higher quality audio file же булак.
Бир динамик иштебейт
  • Ошол динамикке туташуу начар.
  • Динамиктин зымы бузулган.
  • Динамик бузулган.
  • Balance/fader settings incorrect.
  • Иштебей калган динамиктин зымдарын текшериңиз.
  • Test the speaker wire for continuity.
  • Swap the non-working speaker with a known good one (if available) to isolate the problem.
  • Check your head unit's balance and fader settings.

Техникалык шарттар

ӨзгөчөлүкДеталь
Модель атыJBL STAGE2 GEN2 965M
Динамик түрү3-Way Coaxial
Динамик өлчөмү6x9 inches (152x229mm)
RMS Power Handling70 Ватт
Эң жогорку күч менен иштөө210 Watts (560 Watts Max Product Power)
Frequency Response50 Гц – 20 кГц
(Note: Product specifications also list 19955 Hz)
Сезимталдуулук91 дБ
(Note: Product specifications also list 92 dB)
Импеданс4 Ом
МатериалМеталл пластик
Байланыш технологиясыКоаксиалдуу
Аудио чыгаруу режимиСтерео
Киргизүү көлөмүtage12 вольт
Монтаж түрүFlush тоосу
Продукциянын өлчөмдөрү (L x W x Y)9.3 x 23.46 x 16.42 см; 2.25 килограмм
Сунушталган КолдонууларCar sound systems, upgrade, replacement, or extension
Сууга туруктуулук деңгээлиСуу өткөрбөйт

Кепилдик жана колдоо

Сиздин JBL Stage2 GEN2 965M speakers come with a manufacturer's warranty and support options.

  • Кепилдик: A 2-year manufacturer's warranty is provided for this product. Please retain your proof of purchase for warranty claims.
  • Запастык бөлүктөр: Запастык бөлүктөр сатып алынган күндөн тартып 2 жыл бою жеткиликтүү.
  • Кардарларды колдоо: Техникалык жардам, кепилдик талаптары же кошумча суроолор үчүн расмий JBLге баш багыңыз website or contact their customer support. Refer to the contact information provided on the JBL webсайтында же продуктунун таңгагында.

© 2026 JBL. Бардык укуктар корголгон. Бул колдонмодогу маалымат эскертүүсүз өзгөртүлүшү мүмкүн.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.