SENSORWORX SWX-803-WH Low Voltage 0-10V Dimmer Light Switch Instruction Manual

1. Киришүү

The SENSORWORX SWX-803-WH is a low voltage dimmer designed to provide manual control for 0-10V dimming lighting systems. This device serves as a companion wall station for low voltage sensor systems, enabling manual on/off, partial-on, or full-range dimming operations. It integrates an intuitive three-button interface with a five-LED level indicator for clear visual feedback. This manual provides essential information for the safe installation, operation, and maintenance of your SWX-803-WH dimmer switch.

2. Коопсуздук маалыматы

• Түзмөктү орнотуудан же тейлөөдөн мурун ар дайым автоматтык өчүргүчтөн электр кубатын өчүрүңүз.
• Орнотуу бардык улуттук жана жергиликтүү электр эрежелерине ылайык квалификациялуу электрик тарабынан жүргүзүлүшү керек.
• Do not use this device with line voltage (120V/277V) applications. It is designed for low voltage (5-24 VDC) systems only.
• Бардык зымдарды туташтыруу коопсуз жана туура изоляцияланганын текшериңиз.
• Иштөө температурасынын диапазону: 0°Cден 50°Cге чейин.

3. Пакеттин мазмуну

• 1 x SENSORWORX SWX-803-WH Dimmer Switch

Image 3.1: SENSORWORX SWX-803-WH Dimmer Switch and its retail packaging.

4. Продукт бүтүп калдыview

The SWX-803-WH features a compact design for easy integration into standard wall boxes. It includes a central on/off button, dedicated raise and lower dimming buttons, and a five-LED indicator for current light level.

Сүрөт 4.1: Алдыңкы view of the dimmer switch, showing the buttons and LED indicators.

Сүрөт 4.2: Бурчтуу view of the dimmer switch, highlighting its slim profile.

Сүрөт 4.3: Дагы бир бурч view, showing the side of the switch.

5. Техникалык шарттар

6. Орнотуу

The SWX-803-WH dimmer switch is designed for mounting in a standard 1-gang wall box with 3.28" hole spacing. It requires less than 1" of mounting depth. Units can also share multiple gang wall boxes with other devices.

6.1 Физикалык орнотуу

• Электр өчүргүчтө кубат өчүрүлгөнүн текшериңиз.
• Mount the switch into a 1-gang wall box using the supplied mounting screws.
• The break-off bracket ears can be removed if necessary for multi-gang installations.

Image 6.1: Installation diagram with front, side, and dimensional views. Note the break-off bracket ears and mounting depth.

6.2 Электр өткөргүч схемасы

The SWX-803-WH is a low voltage device and must be connected to a compatible power/relay pack (e.g., SWX-900-AX model) for proper operation. Controlled lighting must have 0-10VDC dimming wires.

Сүрөт 6.2: Артка view of the dimmer switch showing wiring terminals and labels.

• КЫЗЫЛ: +VDC (Power Input)
• BRN: SWITCH OUTPUT
• YEL: RELAY STATUS INPUT
• BLK: COMMON / DIM (-) (Common for power and 0-10V dimming negative)
• VIO: DIM OUTPUT (+) (0-10V dimming positive)

For detailed wiring instructions and diagrams, please refer to the official documentation available via the QR code on the product or by visiting: SENSORWORX SWX-803-WH Documentation

7. Орнотуу жана конфигурациялоо

The SWX-803-WH dimmer switch is designed to interface with a low voltage sensor system, typically connected to a SENSORWORX SWX-900-AX model power pack. Once wired correctly, the switch will communicate with the power pack to control the connected 0-10V dimmable lighting fixtures. No complex configuration is typically required on the switch itself beyond proper wiring.

8. Иштөө нускамалары

The SWX-803-WH provides intuitive control over your 0-10V dimmable lighting.

• Күйгүзүү/өчүрүү башкаруу: Press the centrally located toggle button to turn the lights ON or OFF.
• Dimming Up: Press the button on the right side (marked with an upward arrow) to increase the light level.
• Dimming Down: Press the button on the left side (marked with a downward arrow) to decrease the light level.
• Light Level Indicator: The five stacked LEDs on the switch provide a visual indication of the current relative dimming level. More LEDs illuminated indicate a higher light output.
• Partial On Mode: When connected to a compatible sensor system, the dimming feature enables a 'Partial On' operating mode, allowing lights to turn on to a preset dimmed level.

9. Техникалык тейлөө

The SENSORWORX SWX-803-WH dimmer switch requires minimal maintenance.

• Тазалоо: To clean the device, wipe it gently with a soft, damp cloth. Do not use abrasive cleaners, solvents, or sprays directly on the switch.
• Текшерүү: Маал-маалы менен өчүргүчтүн бузулуу белгилерин же бош байланыштарды текшерип туруңуз. Кандайдыр бир көйгөй табылса, электр энергиясын өчүрүп, квалификациялуу электрикке кайрылыңыз.

10. Кыйынчылыктарды

• Lights do not turn ON/OFF:
  • Check if power is supplied to the power pack and the dimmer switch.
  • Бардык зымдардын туташууларынын бекем жана схемага ылайык туура экенин текшериңиз.
  • Ensure the connected lighting fixtures are operational.
• Lights do not dim:
  • Confirm that the connected lighting fixtures are 0-10V dimmable and their dimming wires are correctly connected to the switch and power pack.
  • Check the 0-10V dimming wire connections for continuity and proper polarity.
• LED индикаторлору иштебей жатат:
  • Ensure the switch is receiving proper low voltage power (5-24 VDC).

If issues persist after performing these checks, contact Technical Support.

11. Кепилдик маалыматы

The SENSORWORX SWX-803-WH Dimmer Light Switch comes with a 5 жылдык кепилдик from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims or detailed terms and conditions, please contact SENSORWORX customer service.

12. Техникалык колдоо

For technical assistance, troubleshooting, or further inquiries regarding your SENSORWORX SWX-803-WH dimmer switch, please contact our support team:

• Телефон: 203-678-4224
• Webсайт: sensorworx.com