Introduction
The JBL Flip 7 is a versatile portable Bluetooth speaker designed for robust performance in various environments. Featuring IP68 water and dustproof rating, AI Sound Boost technology, and a long-lasting battery, it delivers powerful and clear audio. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device.
Кутуда эмне бар
Upon unboxing your JBL Flip 7, you should find the following items:
- JBL Flip 7 портативдик Bluetooth динамиги
- Билек боо
- Карабин
- Quick Start Guide
- Коопсуздук баракчасы
- Power Adapter & USB-C charging cable (Note: USB-C charging cable is NOT included to minimize e-waste. It is compatible with any standard USB-C cable, sold separately.)
Жайгашуу
Баштапкы заряд
Before first use, it is recommended to fully charge your JBL Flip 7. Connect a compatible USB-C charging cable (not included) to the speaker's USB-C port and to a power source. The charging indicator will show the battery status.
Күйгүзүү/өчүрүү
- To power on, press the power button located on the control panel.
- Өчүрүү үчүн, кубат баскычын катуу сүйлөгүч өчкүчө басып туруңуз.
Иштөө нускамалары
Bluetooth Жупташтыруу
- Ensure the JBL Flip 7 is powered on.
- Динамиктеги Bluetooth баскычын басыңыз. LED индикатору күйүп-өчөт, бул анын жупташтыруу режиминде экенин билдирет.
- On your mobile device, navigate to Bluetooth settings and select "JBL Flip 7" from the list of available devices.
- Туташтырылгандан кийин, LED индикатору катуу күйөт.
Auracast (Multi-Speaker Pairing)
The JBL Flip 7 supports Auracast technology, allowing you to broadcast audio to multiple compatible JBL Auracast-enabled speakers without traditional pairing. This creates a wider soundstage for larger gatherings.
- Connect your primary JBL Flip 7 to your audio source via Bluetooth.
- Press the Auracast button on the primary speaker.
- On any secondary JBL Auracast-enabled speakers, press their respective Auracast buttons.
- The speakers will automatically connect and synchronize audio.
Image: Multiple JBL Flip 7 speakers connected via Auracast for expanded audio coverage.
Wired Connection (USB-C Audio)
For lossless audio playback, you can connect a device directly to the JBL Flip 7 using a USB-C to USB-C cable (not included).
- Ensure the JBL Flip 7 is powered on.
- Connect one end of a USB-C to USB-C cable to your audio source (e.g., laptop, smartphone) and the other end to the USB-C port on the JBL Flip 7.
- The speaker will automatically detect the wired connection and play audio from the connected device.
Image: JBL Flip 7 connected to a laptop via USB-C for wired audio playback.
Controls
The JBL Flip 7 features intuitive controls on its surface:
- Кубат баскычы: Динамикти күйгүзөт же өчүрөт.
- Bluetooth баскычы: Bluetooth жупташтыруу режимин баштайт.
- Auracast баскычы: Activates Auracast for multi-speaker connection.
- Ойнотуу/тындыруу баскычы: Аудио ойнотууну көзөмөлдөйт.
- Көлөмдү өйдө / ылдый баскычтары: Динамиктин үнүн тууралайт.
Чалууларды иштетүү
The JBL Flip 7 does not feature a built-in microphone. For calls, it will utilize the microphone on your connected source device (e.g., smartphone).
Техникалык тейлөө
Тазалоо
Thanks to its IP68 rating, the JBL Flip 7 is waterproof and dustproof, making it easy to clean.
- Rinse the speaker with fresh water to remove dirt, sand, or debris.
- For stubborn dirt, use a mild soap and a soft brush.
- Ensure the USB-C port is dry before charging.
Image: JBL Flip 7 speaker on a rock with water splashing over it, highlighting its durability.
Заряддоо
The JBL Flip 7 is equipped with a smart charging system. If water or debris is detected in the USB-C charging port, the speaker will prevent charging and indicate this with flashing lights. Allow the port to dry completely before attempting to charge again. Avoid inserting tissue paper or other materials into the port, as this can leave debris and cause damage.
Проблемаларды чечүү
| Көйгөй | Мүмкүн чечим |
|---|---|
| Динамик күйбөйт. | Ensure the battery is charged. Connect to a power source using a USB-C cable. |
| Bluetooth аркылуу жупташтыруу мүмкүн эмес. | Ensure the speaker is in pairing mode (flashing Bluetooth LED). Unpair the speaker from your device's Bluetooth settings and try pairing again. Ensure no other devices are actively connected. |
| Үн жок же үнү төмөн. | Check the volume levels on both the speaker and your connected device. Ensure the device is playing audio. |
| Charging issues (flashing lights). | Water or debris may be in the USB-C port. Allow the port to dry completely before attempting to charge. |
| Auracast connection issues. | Ensure all speakers are Auracast-enabled and within range. Press the Auracast button on each speaker to initiate connection. |
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | JBL |
| Модель номери | FLIP7BLU/BPH |
| Динамиктин максималдуу чыгаруу күчү | 35 Ватт |
| Байланыш технологиясы | Bluetooth |
| Аудио чыгаруу режими | Стерео |
| Монтаж түрү | Portable |
| Динамик түрү | Ичинде жана сыртында |
| Кошумча функциялар | Bass Boost, Dustproof, Portable, Stereo Pairing, Waterproof, AI Sound Boost, PushLock System |
| Батареянын орточо иштөө мөөнөтү | Up to 16 Hours (14 hours standard, 2 extra with Playtime Boost) |
| Сууга туруктуулук деңгээли | IP68 (Суу өткөрбөйт жана чаң өткөрбөйт) |
| Башкаруу ыкмасы | Колдонмо, тийүү |
| Элементтин өлчөмдөрү (D x W x Y) | 2.8"D x 2.6"W x 7"H |
| Элемент Салмагы | 1.23 фунт |
| Экологиялык таза курулуш | Up to 77% post-recycled plastic, 100% recycled fabric, FSC-certified paper packaging with soy ink. |
Кепилдик жана колдоо
Кепилдик маалымат
The JBL Flip 7 comes with a Limited 1-Year Manufacturer Warranty. Please refer to the included Safety Sheet for full details on warranty coverage and terms.
Кардарларды колдоо
For technical support, firmware updates, or customizable audio controls, download the JBL Portable mobile app. You can also visit the official JBL webкошумча жардам жана продукт маалымат алуу үчүн сайт.