1. Продукт бүтүп калдыview
The Partuto Nano Ceramic Car Window Tint Film is designed to enhance your vehicle's comfort and privacy. This high-performance film features a 50% Visible Light Transmission (VLT), 60% Infrared Rejection (IRR), and 99% Ultraviolet Rejection (UVR). Made from durable 2mil PET material, it comes in a green tint and measures 5ft x 24inch, providing effective heat insulation and sun protection.
Image 1: A roll of the Partuto Nano Ceramic Car Window Tint Film, showcasing its green hue and reflective surface.
Видео 1: Кыскача продуктview demonstrating the Nano Ceramic Window Tint Film's features, including its heat insulation and UV blocking capabilities.
2. Негизги өзгөчөлүктөрү жана артыкчылыктары
- Superior UV Protection: Blocks 99% of harmful UV rays, preventing interior fading and protecting occupants from sun exposure.
- Effective Heat Insulation: Reduces heat buildup inside the vehicle, contributing to a cooler interior and potentially lower air conditioning usage.
- Жакшыртылган купуялык: The 50% VLT provides a degree of privacy while maintaining visibility from inside.
- Anti-Glare Properties: Helps reduce glare from sunlight and headlights, improving driving visibility and safety.
- Туруктуу курулуш: Made from PET material with a scratch-resistant coating for long-lasting performance.
Image 2: Illustration of various Visible Light Transmission (VLT) levels on car windows, demonstrating the visual effect of different tint percentages.
Image 3: A visual representation highlighting the film's key performance metrics: 50% VLT, 60% IRR, and 99% UVR.
Image 4: Close-up of the film emphasizing its benefits: UV Shielding, Heat Resistance, and Enhanced Privacy.
Image 5: A demonstration of the film's material, highlighting its ability to provide ultraviolet and infrared protection.
Video 2: A detailed demonstration of Nano Ceramic Window Tint specifications, including measurements of VLT, UVR, IRR, and BTU heat transmission for various tint levels.
3. Техникалык шарттар
| Атрибут | Нарк |
|---|---|
| Түс | Жашыл |
| Материал | ПЕТ |
| Өлчөмү (Узун*Т) | 150 x 60cm / 5ft x 24inch |
| Visible Light Transmission (VLT) | 50% |
| Infrared Rejection (IRR) | 60% |
| Ultraviolet Rejection (UVR) | 99% |
| Калыңдыгы | 2 млн |
| Элемент Салмагы | 6.4 унция |
| Пакеттин өлчөмдөрү | 25.2 x 2.36 x 1.57 дюйм |
| Элемент моделинин номери | tu000424a250428 |
| Позиция | Сыртта |
Image 6: Visual representation of the film's dimensions: 150cm (5ft) in length and 60cm (24inch) in width.
4. Орнотуу боюнча колдонмо
Follow these steps for proper installation of your window tint film:
- Өлчөө жана кесүү: Measure the size of the glass surface where the film will be applied. Cut the film to the approximate size, leaving a small margin for trimming.
- Айнек тазалоо: Thoroughly wash the glass surface to remove any dirt, dust, or debris. Spray water generously on the glass to wet it completely.
- Фильмди даярдоо: Carefully tear off the protective liner from the film. Spray water onto the adhesive side (the rubber surface) of the film to wet it.
- Плёнканы колдонуу: Carefully place the film onto the wet glass surface. Adjust its position as needed. Spray additional water on the film's surface to lubricate it for smoothing.
- Remove Water and Bubbles: Using a squeegee, gently push water and air bubbles from the center of the film outwards towards the edges. Ensure all bubbles are removed for a smooth finish.
- Trim Excess Film: Once the film is smooth and positioned correctly, use a sharp utility knife to carefully trim any excess film along the edges of the glass.
Image 7: A person applying the window tint film to a car window, demonstrating the smoothing process.
Сүрөт 8: Мисamples of where the window tint film can be installed, including side windows, front and rear windshields, and sunroofs.
5. Кароо жана тейлөө
To ensure the longevity and performance of your window tint film, follow these care guidelines:
- Айыруу убактысы: Allow at least 3-5 days for the film to fully cure after installation. Avoid rolling down windows or cleaning the tinted surface during this period.
- Тазалоо: Use a soft cloth and a non-abrasive, ammonia-free window cleaner. Spray the cleaner onto the cloth first, then wipe the tinted surface gently.
- Катуу химиялык заттардан алыс болуңуз: Do not use cleaners containing ammonia, alcohol, or other harsh chemicals, as these can damage the film.
- Абразивтерден качыңыз: Do not use abrasive pads, brushes, or tools that could scratch the film.
- Үзгүлтүксүз текшерүү: Periodically check the film for any signs of peeling, bubbling, or damage. Address minor issues promptly to prevent further deterioration.
6. Кыйынчылыктарды
Бул жерде кээ бир жалпы маселелер жана алардын мүмкүн болуучу чечимдери:
- көбүкчөлөр: Small water bubbles are normal immediately after installation and should disappear as the film cures. Larger air bubbles or persistent water bubbles may require re-squeegeeing or professional assistance.
- Peeling Edges: If the film edges begin to peel, it may indicate insufficient cleaning or improper trimming during installation. Re-clean the area and re-apply if possible, or consider professional repair.
- Тумандуу көрүнүш: A slight haze is common during the curing process. This should clear up completely once the film is fully dry. Ensure adequate drying time.
- сызыктар: While the film is scratch-resistant, deep scratches can occur from sharp objects. Minor scratches may be less noticeable over time, but significant damage may require film replacement.
7. Кепилдик жана колдоо
For warranty information or technical support, please refer to the product packaging or contact Partuto customer service directly. Keep your proof of purchase for any warranty claims.
Байланыш маалыматы: Please visit the official Partuto website or your retailer's support page for the most up-to-date contact details.