BoxWave DirectSync USB 3.0 A to USB 3.1 Type C Cable

BoxWave DirectSync USB 3.0 A to USB 3.1 Type C Cable User Manual

Model: DirectSync USB 3.0 A to USB 3.1 Type C Cable

Introduction

The BoxWave DirectSync USB 3.0 A to USB 3.1 Type C Cable is designed to provide efficient charging and high-speed data transfer for your compatible devices, such as the Sonim H100 4G. This 6-foot cable offers reliable connectivity and durability for everyday use.

Продукт өзгөчөлүктөрү

Hi-Speed USB 3.1 Data Transfers: Supports rapid data synchronization.
Dual-Functionality: Capable of both charging your device and transferring data simultaneously.
Generous 6-Foot Length: Provides flexibility and convenience for use in various settings.
Shielded Cable Design: Offers protection for enhanced durability and longevity.
Reinforced Strain Reliefs: Features strong rubberized grommet strain reliefs to prevent kinks and splitting at the connectors.

Жайгашуу

Setting up your DirectSync cable is straightforward. No software installation is required for basic functionality.

Портторду аныктоо: Locate the USB-A port on your charging adapter, computer, or power bank, and the USB-C port on your device (e.g., Sonim H100 4G).
USB-A туташтырыңыз: Insert the USB-A end of the DirectSync cable into a compatible USB-A port on your power source or computer.
USB-C туташтырыңыз: Insert the USB-C end of the DirectSync cable into the USB-C port on your device.
Байланышты текшерүү: Ensure both ends are securely connected. Your device should indicate charging or a data connection.

BoxWave DirectSync USB 3.0 A to USB 3.1 Type C Cable connected to a Sonim H100 4G device. — Image: The BoxWave DirectSync cable shown alongside a Sonim H100 4G device, illustrating the connection type.

Иштөө нускамалары

Түзмөгүңүздү заряддоо

To charge your device, connect the DirectSync cable as described in the Setup section. The cable will deliver power from the USB-A source to your USB-C device. Charging speed may vary depending on the power output of your charger and the device's charging capabilities.

A smartphone connected to a laptop via the BoxWave DirectSync cable, showing the phone charging. — Image: The DirectSync cable facilitating charging and data transfer between a laptop and a smartphone, highlighting its dual functionality.

Маалыматтарды синхрондоштуруу

For data transfer, connect the USB-A end to a computer's USB 3.0 or higher port and the USB-C end to your device. Your computer should recognize the connected device, allowing you to transfer files, photos, and other data at high speeds (up to USB 3.1 specifications).

A tablet and a power bank connected by the BoxWave DirectSync cable on a wooden desk. — Image: The DirectSync cable connecting a tablet to a power bank, demonstrating its use for charging portable devices.

Техникалык тейлөө

Proper care will extend the life of your DirectSync cable.

Сактагыч: When not in use, coil the cable loosely. Avoid sharp bends or kinks, especially near the connectors.
Тазалоо: Кабель менен туташтыргычтарды жумшак, кургак чүпүрөк менен сүртүңүз. Суюк тазалоочу каражаттарды же абразивдүү материалдарды колдонбоңуз.
Колдонуу: Электр розеткасынан сууруп жатканда ар дайым кабелдин өзүнөн эмес, туташтыргычтын башынан тартыңыз.
Курчап турган чөйрө: Кабелди өтө жогорку температурага, түз күн нуруна же ашыкча нымдуулукка дуушар кылбаңыз.

Close-up of the reinforced strain relief on the BoxWave DirectSync cable's USB-C connector. — Сүрөт: деталдуу view of the reinforced strain relief on the cable's connector, designed to prevent damage from bending.

Проблемаларды чечүү

Маселе	Мүмкүн себеп	Чечим
Түзмөк заряддалбай жатат.	Loose connection, faulty power source, or incompatible device.	Ensure both ends of the cable are securely plugged in. Try a different power outlet or USB port. Verify your device supports USB-C charging.
Жай кубаттоо ылдамдыгы.	Low power output from source, or device limitation.	Use a charger with higher power output (e.g., a wall adapter instead of a computer USB port). Ensure your device supports fast charging if applicable.
Маалыматтарды өткөрүү иштебей жатат.	Loose connection, incorrect USB port on computer, or device settings.	Reconnect the cable. Try a different USB port on your computer (preferably a USB 3.0 or higher port). Check your device's USB connection settings (e.g., "File өткөрүп берүү" режими).
Кабель бузулган окшойт.	Physical stress or improper handling.	Discontinue use immediately to prevent damage to your devices. Replace the cable.

Техникалык шарттар

Продукт аты: BoxWave DirectSync USB 3.0 A to USB 3.1 Type C Cable
Модел: DirectSync
Туташтыргыч түрү 1: USB 3.0 Type-A Male
Туташтыргыч түрү 2: USB 3.1 Type-C Male
Кабелдин узундугу: 6 фут (болжол менен 1.8 метр)
Маалыматтарды өткөрүү ылдамдыгы: Supports Hi-Speed USB 3.1 (up to 5Gbps)
Функционалдык: Charge and Sync
Түсү: Кара
Элемент Салмагы: 3 унция
Өндүрүүчү: BoxWave

Кепилдик жана колдоо

BoxWave products are designed for quality and reliability. This product includes limited 3rd party technical support for your device (up to 3 inquiries via messaging). For further assistance or warranty inquiries, please contact BoxWave Corporation directly through their official support channels.

Please note that this product is not affiliated with or endorsed by Sonim.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.