Гедсффати HD08
Gedsffati HD08-G Gas and CO Detector User Manual
Модели: HD08
Introduction
The Gedsffati HD08-G is a direct insertion combined gas and carbon monoxide (CO) detector designed for home use. It provides real-time monitoring of gas and CO concentrations, offering audible and visual alarms to enhance safety. This manual provides essential information for the proper installation, operation, and maintenance of your detector.
Маанилүү коопсуздук маалыматы
- Орнотуудан жана колдонуудан мурун бардык нускамаларды кылдат окуп чыгыңыз.
- Бул аппарат имараттын ичинде гана колдонууга арналган.
- Детекторду боёбоңуз. Боёк сенсордун тешиктерин бүтөп, түзмөктүн туура иштешине тоскоол болушу мүмкүн.
- Детектордун желдетүү тешиктерин жаппаңыз.
- Regularly test the detector as instructed in this manual.
- In case of an alarm, follow the emergency procedures outlined in the operating section.
- This detector is not a substitute for proper maintenance of fuel-burning appliances, including appropriate ventilation and exhaust systems.
Продукт бүттүview жана өзгөчөлүктөрү
The HD08-G detector features high-precision sensors for reliable detection of combustible gases (Natural Gas, LPG, Methane, Propane, Butane) and Carbon Monoxide. Its 2.1-inch HD color screen provides clear, real-time information.
Негизги өзгөчөлүктөрү:
- High-precision sensors for gas and CO detection.
- High-definition colorful large screen display (2.1-inch, 240*296 resolution, IPS ultra broad perspective).
- Audible and visual alarm system.
- Fault self-check function.
- Plug and play орнотуу.
- Real-time monitoring of gas and CO concentration, temperature, and humidity.
Компоненттери:
The device includes a main display unit with three control buttons (H, O, D) and an intelligent power indicator light.

Сүрөт: алдыңкы view of the Gedsffati HD08-G detector highlighting its display and features like high precision sensors and audible/visual alarm.

Сүрөт: жарылды view illustrating the internal high-precision sensors and sensitive detection performance of the HD08-G detector.
Орнотуу жана орнотуу
The HD08-G detector is designed for simple plug-and-play installation.
- Ылайыктуу жерди тандаңыз:
- For gas detection: Install near gas appliances (e.g., stove, water heater) where gas leaks might occur. Combustible gases like LPG and propane are heavier than air and tend to sink, so place the detector lower. Natural gas and methane are lighter than air and rise, so place it higher.
- For CO detection: Install at breathing height, typically 1.5 meters (5 feet) from the floor. Avoid placing it directly above heat sources or in areas with high humidity.
- Ensure the detector is not obstructed by furniture, curtains, or other objects.
- Plug in the detector: Insert the detector directly into a standard electrical outlet. The device will power on automatically.
- Initial self-check: Upon powering on, the detector will perform a self-check. The intelligent power indicator light will show green if normal.

Сүрөт: Мисamples of suitable installation locations for the HD08-G detector in different environments, emphasizing its versatility for home and travel.
Иштөө нускамалары
Маалыматты көрсөтүү:
The 2.1-inch HD color screen displays the following information:
- CO PPM: Көмүртек кычкылынын концентрациясы миллионго барабар.
- ГАЗ: Combustible gas concentration, often represented by a bar graph or numerical value.
- Температура: Ambient temperature (e.g., in °F or °C).
- Нымдуулук: Салыштырмалуу нымдуулук пайызtage.
- Статус белгилери: Icons for sound, alarm, and light sensor.

Image: The detector's display showing real-time monitoring of CO and combustible gas concentrations, along with temperature and humidity.

Сүрөт: деталдуу view of the 2.1-inch HD color screen display, highlighting its clarity and technical specifications.
Өзүн-өзү сыноо функциясы:
To perform a manual self-test:
- Short press the 'O' button on the front of the detector.
- The device will initiate a self-test sequence, activating the alarm and checking sensor functionality.
- The intelligent power indicator light will show green for normal operation. A red light indicates a mute error or sensor malfunction.

Image: Illustration of the intelligent power indicator light and the self-test function, explaining the meaning of green and red light indicators.
Alarm Indications:
When gas or CO concentration reaches dangerous levels, the detector will activate an audible and visual alarm.
- Үн сигнализациясы: A loud siren will sound.
- Визуалдык ойготкуч: The screen will display alarm messages, and the indicator light will turn red.

Image: The detector in an alarm state, demonstrating the sound and light alarm to prevent danger, with CO and gas levels displayed.
Сигнал болгон учурда:
- Дүрбөлөң түшпөө.
- Аймакты желдетүү үчүн терезелерди жана эшиктерди ачыңыз.
- Turn off all gas appliances and sources.
- Жайларды дароо эвакуациялаңыз.
- Коопсуз жерден газ берүүчүгө же шашылыш кызматтарга чалыңыз.
- Do not re-enter the premises until it has been declared safe by professionals.
Техникалык тейлөө
- үзгүлтүксүз тазалоо: Gently wipe the detector's exterior with a soft, damp cloth. Do not use cleaning agents, solvents, or abrasive materials.
- Айлык тест: Perform the self-test function (short press 'O' button) at least once a month to ensure proper operation.
- Тоскоолдуктарды болтурбоо: Ensure that the detector's ventilation openings are not blocked by dust, dirt, or other objects.
- Сенсордун иштөө мөөнөтү: Gas and CO sensors have a limited lifespan. Refer to the product specifications or manufacturer's guidelines for replacement recommendations.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Детектор күйбөйт. | Розеткадан электр энергиясы жок. | Check the power outlet with another appliance. Ensure the detector is fully plugged in. |
| Red indicator light / Alarm during self-test. | Sensor malfunction or mute error. | Unplug and re-plug the detector. If the issue persists, contact customer support. |
| Жалган сигналдар. | Interference from strong fumes (e.g., cleaning products, paint, aerosols) or high humidity. | Ensure proper ventilation. Relocate the detector away from sources of fumes or excessive humidity. |
| Дисплей бош же окулбайт. | Электр кубатынын көйгөйү же дисплейдин иштебей калышы. | Check power connection. If still blank, contact customer support. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact Gedsffati customer support.
Техникалык шарттар
| Модель номери | HD08 |
| Бренд | Gedsffati |
| Бөлүмдүн номери | YDT-EU-HD08-G-WHITE-2PCS |
| Түс | Ак |
| Стиль | Плагин |
| Кубат булагынын түрү | Электр зымдары |
| Тtage | 230 вольт (AC) |
| Батареялар камтылган | Жок |
| Батареялар талап кылынат | No (1 Lithium Polymer batteries required for internal functions, not user replaceable) |
| Элемент Салмагы | 60 грамм |
| Продукциянын өлчөмдөрү (L x W x Y) | 8.5 x 5.1 x 3.3 см |
| UPC | 747086495947 |
Кепилдик жана колдоо
For warranty information, please refer to the documentation provided with your purchase or contact the retailer where the product was acquired. For technical support or further assistance, please contact Gedsffati customer service through their official webсайты же продуктунун таңгагында берилген байланыш маалыматы.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.