SENSORWORX SWX-851-WH Wireless Light Switch and Load Controller User Manual

1. Киришүү

This manual provides instructions for the installation, operation, and maintenance of the SENSORWORX SWX-851-WH Wireless Light Switch and Load Controller. This device is designed for seamless integration into lighting systems, offering wireless control for both residential and commercial applications. It operates on 120-277VAC line voltage and supports various load types.

Figure 1: SENSORWORX SWX-851-WH Wireless Light Switch and Load Controller with its packaging.

2. Коопсуздук маалыматы

• ЭСКЕРТҮҮ: Risk of electric shock. Installation should be performed by a qualified electrician in accordance with all national and local electrical codes.
• Disconnect power at the circuit breaker or fuse before installing or servicing the device.
• Бул аппаратты анын белгиленген көрсөткүчтөрүнөн ашкан жүктөр менен колдонбоңуз.
• Бардык зым байланыштары коопсуз жана туура изоляцияланганын текшериңиз.
• Бул аппарат имараттын ичинде гана колдонууга арналган.
• The device meets regulatory guidelines for current leakage, ensuring safe operation.

3. Пакеттин мазмуну

Пакетте бардык буюмдар бар экенин текшериңиз:

• Wireless Wall Switch and Load Controller (SWX-851-WH)
• Wire Leads
• Монтаждоо бурамалар
• Wire Nuts
• Нускамалар (бул колдонмо)

4. Орнотуу жана орнотуу

4.1 Электр зымдары боюнча нускамалар

The SWX-851-WH supports both 2-wire and 3-wire installations and does not require a neutral connection or a minimum load. It is compatible with 120-277VAC line voltage системалары.

• Баштоодон мурун: Автоматтык өчүргүчтөн электр кубатын өчүрүңүз.
• Identify the LINE (hot) and LOAD wires in the wall box.
• Connect the wires from the SWX-851-WH to the corresponding wires in the wall box using the provided wire nuts:
  • Кара зым: Connect to LINE (hot) wire.
  • Көк жип: Connect to LOAD wire.
  • Жашыл зым: Connect to GROUND wire.
  • White (or Yellow/Green) Wire: This is the NEUTRAL connection. If a neutral connection is available and desired, connect it. If no neutral is present or required, cap this wire off.
• Бардык байланыштар коопсуз экенин текшериңиз.

2-сүрөт: Арткы view of the SWX-851-WH, illustrating wiring connections. Black for Line, Blue for Load, Green for Ground, and White/Yellow/Green for Neutral (optional).

4.2 Физикалык орнотуу

• Carefully push the wired controller into the wall box. The compact design allows for easier installation in crowded boxes.
• Secure the controller to the wall box using the provided mounting screws.
• Install the wall plate (not included) over the controller.
• Автоматтык өчүргүчтөгү кубаттуулукту калыбына келтириңиз.

4.3 Зымсыз жупташтыруу

The SWX-851-WH can be paired with up to 30 wireless sensors and remote wall stations for automatic lighting control. Refer to the specific instructions for your SENSORWORX wireless sensors or remote wall stations for pairing procedures. Typically, pairing involves a sequence of button presses on both devices.

For detailed instructions, you may scan the QR code on the back of the device or visit the SENSORWORX website. A direct link to the instructions is available бул жерде.

5. Операция

5.1 Негизги күйгүзүү/өчүрүү башкаруусу

The primary function of the SWX-851-WH is to control connected lighting loads. Press the button on the switch to toggle the connected lights ON or OFF.

Сүрөт 3: Алдыңкы view of the SWX-851-WH, showing the control button.

5.2 Өркүндөтүлгөн конфигурация

The SWX-851-WH offers configurable settings for time delays, operational modes (occupancy, vacancy, switch disable), and photocell settings. These adjustments can be made without removing the cover plate, typically through specific button press sequences or via a paired sensor/programmer.

• Жашоо режими: Lights turn ON automatically when occupancy is detected and OFF after a set time delay when the space is vacant.
• Вакансия режими: Lights must be turned ON manually but turn OFF automatically after a set time delay when the space is vacant.
• Switch Disable Mode: Disables the local switch button, allowing control only via paired wireless devices.
• Фотоселл орнотуулары: Adjusts light level thresholds for automatic control based on ambient light.

Consult the full product documentation or the SENSORWORX website for detailed instructions on accessing and modifying these advanced settings.

6. Техникалык тейлөө

• Тазалоо: To clean the device, wipe with a soft, damp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз. Тазалоодон мурун электр кубаты өчүрүлгөнүн текшериңиз.
• Текшерүү: Periodically inspect the device for any signs of damage or loose connections. If damage is found, disconnect power and contact a qualified electrician.
• Ичинде колдонуучу тейлей турган бөлүктөр жок.

7. Кыйынчылыктарды

If the problem persists after attempting these solutions, contact SENSORWORX customer support or a qualified electrician.

8. Техникалык шарттар

9. Кепилдик жана колдоо

9.1 Продукциянын кепилдиги

The SENSORWORX SWX-851-WH Wireless Light Switch and Load Controller comes with a 5 жылдык кепилдик from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims, please retain your proof of purchase.

9.2 Кардарларды колдоо

For technical assistance, troubleshooting, or warranty inquiries, please contact SENSORWORX customer support. Visit the official SENSORWORX webбайланыш маалыматы жана кошумча ресурстар үчүн сайт.

Webсайт: www.sensorworx.com