Kenmore 10657765790 Refrigerator Door Cam Kit Replacement Parts Manual

Introduction

This manual provides essential instructions for the installation, functionality, maintenance, and troubleshooting of the replacement door cam kit for Kenmore refrigerator model 10657765790. Please read these instructions carefully before proceeding with installation to ensure proper function and safety.

Продукт бүттүview

The Kenmore 10657765790 Refrigerator Door Cam Kit is designed to replace worn or damaged door cam components, restoring proper door alignment and closing functionality to your refrigerator. This kit includes the necessary parts for a complete replacement.

This image displays all the components included in the replacement kit. It features two black L-shaped door cams, four black oval-shaped cam followers with two holes each, and several types of screws for installation.

Комплекттин мазмуну:

• Replacement door cam components
• Associated fasteners (screws)

Орнотуу жана орнотуу

Proper installation is crucial for the correct operation of your refrigerator door. If you are unsure about any step, it is recommended to consult a qualified appliance technician.

Коопсуздук чаралары:

• Always unplug the refrigerator from the power outlet before beginning any repair or maintenance to prevent electrical shock.
• Колуңузду коргоо үчүн кол кап сыяктуу тиешелүү коопсуздук каражаттарын кийиңиз.
• Be cautious when handling heavy refrigerator doors. It may require two people to safely remove and reinstall the door.

Керектүү куралдар (Типтүү):

• Бурагычтар топтому (Phillips жана жалпак баштуу)
• Nut driver or wrench set
• Кычкач
• Putty knife or thin pry tool

Орнотуу кадамдары (Жалпы колдонмо):

1. Муздаткычты даярдоо: Unplug the refrigerator. Empty the contents of the door shelves to reduce weight.
2. Remove the Door: Carefully remove the refrigerator door. This typically involves removing hinge covers, unscrewing hinge pins or bolts, and lifting the door off its hinges. Refer to your specific refrigerator model's service manual for precise door removal instructions.
3. Locate and Remove Old Cam Kit: Identify the existing door cam components on both the door and the refrigerator frame. These are usually located at the bottom hinge. Remove any screws or fasteners holding the old cam kit in place.
4. Аймакты тазалоо: Clean any debris or old lubricant from the hinge areas before installing new parts.
5. Install New Cam Kit: Attach the new door cam components to the door and the refrigerator frame according to their design. Ensure they are oriented correctly. Secure them with the provided new screws or fasteners.
6. Reinstall the Door: Carefully align the door with the new cam components and lower it onto the hinges. Reattach all hinge pins, bolts, and covers.
7. Эшиктин иштеши: Open and close the door several times to ensure it swings smoothly and closes completely without resistance.
8. Кубатты кайра туташтыруу: Once satisfied with the installation, plug the refrigerator back into the power outlet.

Functionality and Post-Installation Check

After installing the new door cam kit, the refrigerator door should operate smoothly and seal properly. The cam kit assists the door in closing fully and maintaining a tight seal, which is essential for energy efficiency and food preservation.

Күтүлгөн жүрүм-турум:

• The door should close gently and completely on its own when pushed slightly.
• There should be no sagging or misalignment of the door.
• The door gasket should form a tight seal around the refrigerator opening.

Техникалык тейлөө

The door cam kit is designed for durability, but periodic checks can help ensure its longevity and proper function.

Техникалык тейлөө боюнча кеңештер:

• Жыл сайын текшерүү: Periodically inspect the door cam components for signs of wear, cracks, or damage.
• Таза: Keep the hinge area clean from dust and debris, which can impede smooth operation.
• Майлоо: If the door cam components appear dry or stiff, a small amount of food-grade silicone grease can be applied to the moving parts to ensure smooth operation. Avoid petroleum-based lubricants.

Проблемаларды чечүү

If you experience issues with your refrigerator door after installing the cam kit, consider the following:

Жалпы маселелер жана чечимдер:

• Door Not Closing Completely:
  • Check if the new cam components are installed correctly and are not obstructed.
  • Ensure the refrigerator is level. An unlevel refrigerator can cause the door to swing open or not close properly.
  • Inspect the door gasket for tears or damage that might prevent a proper seal.
• Door Sagging or Misaligned:
  • Verify that all hinge screws and cam kit fasteners are securely tightened.
  • Ensure the door is properly seated on both the top and bottom hinges.
• Squeaking or Grinding Noise:
  • Apply a small amount of food-grade silicone grease to the cam surfaces.
  • Check for any foreign objects or debris in the hinge area.

Эгер көйгөйдү чечүү кадамдары маселени чечпесе, квалификациялуу тейлөө техникине кайрылыңыз.

Техникалык шарттар

• Бөлүмдүн номери: FRIC-PL-APP-TP-22052025-021492
• Шайкеш модель: Кенмор 10657765790
• Өлчөмү: One Size
• Түсү: Black/White (components may vary)
• Буюм пакетинин саны: 1 комплект
• Даана саны: 1 (referring to the kit as a single item)
• Өндүрүүчү: Fricparts

Кепилдик маалымат

Specific warranty details for this replacement part are not provided in this manual. Please refer to the product packaging or contact the seller directly for information regarding warranty coverage and terms.

Колдоо

For further assistance or technical support, please contact the seller or the manufacturer, Fricparts. Ensure you have your product model number (10657765790) and part number (FRIC-PL-APP-TP-22052025-021492) available when seeking support.