Replacement Water Inlet Valve Instruction Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the Fricpart-145791 replacement water inlet valve for Whirlpool GU2700XTSS1 dishwashers. Please read these instructions carefully before proceeding with installation to ensure proper function and safety.

Коопсуздук маалыматы

• Always disconnect power to the dishwasher before attempting any repairs or installations.
• Ишти баштоодон мурун идиш жуугучка суу берүүнү өчүрүңүз.
• Кол кап жана көздү коргоо сыяктуу тиешелүү жеке коргоочу шаймандарды кийиңиз.
• Эгер кандайдыр бир кадамды так билбесеңиз, квалификациялуу техника боюнча адиске кайрылыңыз.
• Ensure all connections are secure and leak-free before restoring power and water.

Продукт бүттүview

The water inlet valve controls the flow of water into your dishwasher. This replacement part is designed to be compatible with Whirlpool GU2700XTSS1 dishwasher models.

1-сүрөт: Fricpart-145791 Replacement Water Inlet Valve. This image shows the complete valve assembly, including the brass threaded inlet, the plastic outlet, and the electrical solenoid connection.

Негизги өзгөчөлүктөрү:

• Direct replacement for Whirlpool GU2700XTSS1 dishwashers.
• Ensures proper water fill levels.
• Ишенимдүү аткаруу үчүн бышык курулуш.

Орнотуу жана орнотуу

Before beginning, ensure you have the necessary tools: screwdriver, pliers, towels, and a bucket to catch any residual water.

1. Кубатты өчүрүү: Идиш жуугучту электр розеткасынан ажыратыңыз же идиш жуугучка кубат берүүчү автоматтык өчүргүчтү өчүрүңүз.
2. Суу менен камсыздоону өчүрүү: Locate the water shut-off valve for the dishwasher (usually under the sink) and turn it off.
3. Клапанга кирүү: Depending on your dishwasher model, you may need to remove the lower access panel or pull the dishwasher out from its cabinet to access the water inlet valve.
4. Калган сууну төгүү: Place towels and a bucket under the water inlet valve to catch any water that may drain when disconnecting the water line.
5. Disconnect Water Line: Use pliers to carefully disconnect the water supply line from the old inlet valve.
6. Электр туташтыргычын ажыратыңыз: Unplug the electrical connector from the old valve's solenoid. Note its orientation for reinstallation.
7. Эски клапанды алып салуу: Эски суу куюучу клапанды монтаждоо кронштейнинен бошотуңуз же бошотуңуз.
8. Жаңы клапанды орнотуу: Mount the new Fricpart-145791 valve onto the bracket, ensuring it is secure.
9. Электр туташтыргычын туташтыруу: Plug the electrical connector firmly onto the new valve's solenoid.
10. Суу түтүгүн туташтыруу: Reattach the water supply line to the new valve. Ensure the connection is tight to prevent leaks.
11. Суу менен камсыздоону калыбына келтирүү: Slowly turn on the water shut-off valve. Check for any leaks around the new valve and connections. Tighten if necessary.
12. Күчтү калыбына келтирүү: Идиш жуугучту кайра сайыңыз же автоматтык өчүргүчтү күйгүзүңүз.
13. Сыноо операциясы: Run a short wash cycle to verify proper water fill and check for leaks during operation.

Иштөө нускамалары

Once the new water inlet valve is installed, the dishwasher's operation should return to normal. The valve functions automatically based on the dishwasher's cycle programming.

• Суу менен камсыздоо толугу менен ачык экенин текшериңиз.
• Select your desired wash cycle on the dishwasher control panel.
• Start the dishwasher. The new valve will open and close as required to fill the dishwasher with the correct amount of water for each stagжуу циклинин e.
• Monitor the first few cycles after installation to confirm proper water intake and absence of leaks.

Техникалык тейлөө

The water inlet valve itself typically requires no routine maintenance. However, regular checks of the surrounding components can help ensure its longevity and proper function.

• агып текшерүү: Periodically check the water supply line connections to the valve for any signs of leaks. Address any drips immediately.
• Water Filter Screen: Some water inlet valves have a small filter screen at the inlet connection to prevent debris from entering. If your dishwasher experiences slow filling, you may need to turn off the water, disconnect the supply line, and clean this screen.
• General Dishwasher Maintenance: Follow your dishwasher's manufacturer recommendations for general cleaning and maintenance to prevent issues that could indirectly affect the valve.

Проблемаларды чечүү

If you encounter issues after installing the new water inlet valve, refer to the following common problems and solutions:

Эгерде бул кадамдар маселени чечпесе, анда квалификациялуу шайман оңдоочу адиске кайрылуу сунушталат.

Техникалык шарттар

• Бөлүмдүн номери: Fricpart-145791 (FRIC-PL-APP-TP-22052025-057680)
• Шайкештик: Whirlpool GU2700XTSS1 Dishwasher
• Өндүрүүчү: Fricparts
• Буюм пакетинин саны: 1
• Түсү: Black/White (referring to components, not overall unit)
• ASIN: B0FBLD2GCW

Кепилдик жана колдоо

For warranty information or technical support regarding this replacement part, please refer to the seller's policy or contact the manufacturer, Fricparts, directly. The product was first available on June 1, 2025.

Сатуучу: Фрикгор

Кайтаруу саясаты: 30 күн (кайтарып берүү/алмаштыруу)