VEICHI AC10 Series (specifically AC10-T/S2-1R5G-B-220V and compatible variants)
VEICHI AC10 Series Frequency Converter User Manual
Model: AC10-T/S2-1R5G-B-220V and Compatible Variants
1. Киришүү
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the VEICHI AC10 series frequency converters. Please read this manual thoroughly before using the product to ensure proper handling and to prevent damage or injury.
The VEICHI AC10 series frequency converters are designed for general-purpose applications, offering reliable motor control and energy efficiency. This manual covers models such as AC10-T/S2-R75G-B-220V, AC10-T/S2-1R5G-B-220V, AC10-T/S2-2R2G-B-220V, AC10-T3-R75G-B-380V, and AC10-T3-1R5G-B-380V.
2. Коопсуздук чаралары
Always observe the following safety precautions to prevent electric shock, fire, or personal injury. Failure to comply may result in severe consequences.
- Квалификациялуу кадрларды: Installation, wiring, operation, and maintenance must be performed by qualified electrical personnel only.
- Электр энергиясын өчүрүү: Always disconnect all power sources before performing any wiring or maintenance. Wait at least 5 minutes after power off for the capacitor discharge indicator to extinguish.
- Негиздөө: Ensure the frequency converter is properly grounded according to local electrical codes.
- Экологиялык шарттар: Do not operate the converter in environments exceeding specified temperature, humidity, or dust levels.
- Коргоочу капкактар: Do not remove protective covers or touch internal components while power is applied.
3. Продукт бүтүп калдыview
The VEICHI AC10 series frequency converter features a compact design with an integrated control panel for easy operation and monitoring.
Сүрөт 3.1: Алдыңкы view of the VEICHI AC10 Frequency Converter. This image displays the main unit, highlighting the digital display for parameters, control buttons for programming and operation, and the various terminal blocks for power and control wiring. A screwdriver is visible in the side compartment.
3.1. Башкаруу панелинин жайгашуусу
The control panel consists of a digital display and several function buttons:
- Дисплей: Shows operational parameters, fault codes, and programming values.
- PRG (Программа): Enters/exits parameter setting mode.
- ӨЙДӨ/ТӨМӨН жебелери: Navigate through parameters, adjust values.
- ЖҮГҮРҮҮ: Моторду иштетет.
- ТОКТОТУУ/КАЙРА ОРНОТУУ: Stops the motor, resets fault conditions.
- SET/SHIFT: Confirms parameter settings, shifts cursor during input.
4. Орнотуу жана орнотуу
4.1. Монтаждоо
Mount the frequency converter vertically on a flat, non-flammable surface. Ensure adequate ventilation space around the unit (at least 10 cm above and below, 5 cm on sides) for heat dissipation.
4.2. Электр зымдары
Refer to the wiring diagram provided with your specific model for detailed connections. General wiring guidelines:
- Кубат киргизүү (R, S, T же L1, L2): Connect to the main power supply. Ensure correct voltage (220V or 380V depending on model).
- Мотордун чыгышы (U, V, W): Мотордун терминалдарына туташтырыңыз.
- Жер (PE): Ишенимдүү жер түйүнүнө туташыңыз.
- Башкаруу терминалдары: For external control signals (e.g., start/stop, speed reference, fault output).
Warning: Incorrect wiring can lead to severe damage to the unit or personal injury. Consult a qualified electrician if unsure.
5. Иштөө нускамалары
5.1. Баштапкы кубаттуулук
- After completing all wiring, apply power to the frequency converter.
- The display will light up, typically showing "0.00" or a default frequency.
5.2. Basic Operation (Keypad Control)
- Жыштык коюу: басыңыз PRG button to enter parameter mode. Navigate to the frequency setting parameter (e.g., F0.01) using the ЖОГОРУ/ТӨМӨН жебелер. Басыңыз SET/SHIFT to edit, adjust value, then SET/SHIFT again to confirm. Press PRG чыгуу.
- Моторду ишке киргизүү: басыңыз RUN баскычын басыңыз. Мотор белгиленген жыштыкка чейин ылдамдайт.
- Моторду токтотуу: басыңыз ТОКТОТ/КАЛЫПТАҢЫР баскычын басыңыз. Мотор жайлап, токтоп калат.
5.3. Параметрлердин Орнотуулары
The AC10 series has a comprehensive set of parameters for various functions. Refer to the detailed parameter list in the full product manual for advanced configurations (e.g., acceleration/deceleration times, motor parameters, control modes).
Exampпараметрлери:
- F0.00: Run command source (keypad, terminal, communication)
- F0.01: Frequency setting source (keypad, analog input, communication)
- F0.03: Максималдуу чыгаруу жыштыгы
- F0.04: Ылдамдатуу убактысы
- F0.05: Басаңдоо убактысы
6. Техникалык тейлөө
Regular maintenance ensures the longevity and reliable operation of your frequency converter.
- Тазалоо: Periodically clean the cooling fins and fan to prevent dust accumulation, which can hinder heat dissipation. Use compressed air or a soft brush. Ensure power is off before cleaning.
- Терминал текшерүү: Annually check all wiring terminals for tightness. Loose connections can cause overheating or intermittent operation.
- Экологиялык текшерүү: Иштөө чөйрөсү белгиленген температура жана нымдуулук диапазондорунда калаарын текшериңиз.
- Вентиляторду алмаштыруу: Cooling fans have a limited lifespan. Consider replacing them every 3-5 years, depending on operating conditions, to maintain optimal cooling.
7. Кыйынчылыктарды
This section provides common issues and their potential solutions. For complex problems, contact technical support.
| Problem/Fault Code | Мүмкүн себеп | Чечим |
|---|---|---|
| Дисплей/Кубат жок | Киргизүү кубаты жок; Сактагыч күйүп кеткен; Ички бузук. | Check power supply; Check fuses; Contact support. |
| Overcurrent (OC) Fault | Motor overload; Short circuit in motor wiring; Rapid acceleration/deceleration. | Check motor load; Inspect motor wiring; Increase acceleration/deceleration time. |
| Overvoltage (OV) Fault | Киргизүү тtage too high; Rapid deceleration with high inertia load. | Киргизүүнү текшерүү томtage; Басаңдатуу убактысын көбөйтүү; Тормоздук резисторду карап көрүү. |
| Undervoltage (UV) Fault | Киргизүү тtage too low; Power supply dip. | Киргизүүнү текшерүү томtage; Ensure stable power supply. |
| Overheat (OH) Fault | Ambient temperature too high; Fan failure; Blocked ventilation. | Improve ventilation; Clean cooling fins; Check fan operation. |
To reset a fault, press the ТОКТОТ/КАЛЫПТАҢЫР button after resolving the cause.
8. Техникалык шарттар
The following specifications are typical for the VEICHI AC10 series. Specific values may vary slightly by model.
| Параметр | Мааниси/аралыгы |
|---|---|
| Киргизүү көлөмүtage | Single-phase 220V (AC10-T/S2 models) or Three-phase 380V (AC10-T3 models) |
| Чыгыштын жыштык диапазону | 0.00 Гц - 20 000 Гц |
| Башкаруу режими | V/F control, Sensorless vector control |
| Ашыкча жүктөө кубаттуулугу | 150% of rated current for 60 seconds |
| Коргоо өзгөчөлүктөрү | Ашыкча ток, Ашыкчаtage, Undervoltage, Overheat, Overload, Short circuit |
| Иштөө температурасы | -10°Cден 40°Cге чейин (14°Fтен 104°Fге чейин) |
| Нымдуулук | Less than 90% RH (non-condensing) |
| Өлчөмдөрү (болжол менен) | Varies by power rating (e.g., 2 x 2 x 2 inches for smaller models) |
| Салмагы (болжол менен) | Varies by power rating (e.g., 4.41 Pounds for smaller models) |
Note: For precise specifications of your specific model, refer to the product label or the comprehensive technical datasheet.
9. Кепилдик жана колдоо
9.1. Кепилдик маалыматы
This product is typically covered by a manufacturer's warranty against defects in materials and workmanship for a period specified at the time of purchase. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, misuse, unauthorized modification, or operation outside of specified environmental conditions.
For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact the seller.
9.2. Техникалык колдоо
If you encounter issues that cannot be resolved using the troubleshooting guide, or require further technical assistance, please contact your supplier or the manufacturer's authorized service center.
Колдоо кызматына кайрылганда, төмөнкү маалыматты берүүгө даяр болуңуз:
- Product Model Number (e.g., AC10-T/S2-1R5G-B-220V)
- Serial Number (if applicable)
- Сатып алуу күнү
- Detailed description of the problem, including any fault codes displayed.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.