OREI UHD14-EX230-K HDMI 1x4 Splitter & Extender Instruction Manual

1. Киришүү

The OREI UHD14-EX230-K is an advanced HDMI 1x4 Splitter and Extender system designed for distributing a single HDMI source to four remote displays over a single CAT6/7/8 network cable. This system supports 4K@60Hz resolution, HDCP 2.2, EDID management, and features an HDMI loop-out for local monitoring. It also includes bi-directional IR control and utilizes Power-over-Cable (PoC) technology, eliminating the need for external power adapters at the receiver units.

2. Пакеттин мазмуну

Пакетиңизде бардык буюмдар бар экенин текшериңиз:

• 1x OREI UHD14-EX230-K HDMI Transmitter (Sender)
• 4x OREI UHD14-EX230-K HDMI Receivers
• 1x 12V DC кубат адаптери
• 1x IR Blaster Cable (for Transmitter)
• 4x IR Receiver Cables (for Receivers)
• 10x Mounting Ears (for Transmitter and Receivers)
• 1x Колдонуучунун колдонмосу

Image: All components included in the OREI UHD14-EX230-K kit, neatly arranged on a table.

3. Орнотуу нускамалары

Follow these steps to set up your OREI HDMI Splitter & Extender system:

1. HDMI булагын өткөргүчкө туташтырыңыз: Connect your HDMI source device (e.g., DVD player, game console, media player) to the HDMI IN port on the Transmitter unit using a high-quality HDMI cable.
2. Жергиликтүү дисплейди туташтыруу (милдеттүү эмес): If you wish to monitor the content locally, connect an HDMI display to the HDMI LOOP OUT port on the Transmitter unit using another high-quality HDMI cable.
3. Connect CAT Cables: Connect one end of a single CAT6/7/8 network cable to each of the OUT 1-4 RJ45 ports on the Transmitter. Connect the other end of each CAT cable to the CAT IN port on each of the four Receiver units. Ensure secure connections for optimal performance.
4. Connect Remote Displays: Connect an HDMI display to the HDMI OUT port on each Receiver unit using high-quality HDMI cables.
5. Инфракызыл кабелдерди туташтыруу: For IR control, connect the IR Blaster cable to the IR OUT port on the Transmitter. Position the IR Blaster eye near the IR sensor of your HDMI source device. Connect the IR Receiver cables to the IR IN ports on each Receiver unit. Position the IR Receiver eye in a location where it can receive signals from your remote control.
6. Күчтү колдонуу: Plug the included 12V DC power adapter into the DC12V port on the Transmitter unit, then plug the adapter into a standard wall outlet. The Receiver units will receive power via the CAT cables (PoC), so no separate power adapters are needed for them.
7. Күйгүзүү: Turn on the Transmitter unit using its power switch. The power indicator LED will light up. The Receiver units will power on automatically.

Image: A detailed diagram illustrating the connection of the HDMI source to the Transmitter, CAT cables to Receivers, and HDMI displays to Receivers, including optional loop-out and IR connections.

4. Иштөө нускамалары

The OREI UHD14-EX230-K is designed for plug-and-play operation. Once all connections are made and power is supplied to the Transmitter, the system will automatically detect and configure the optimal video resolution for your connected displays.

• Automatic EDID Management: The system features automatic EDID management to ensure compatibility between your HDMI source and various displays. It will negotiate the best possible resolution and audio format.
• IR башкаруу: Use your original remote control at any of the remote display locations. The IR Receiver will capture the signal and transmit it back to the Transmitter, which then uses the IR Blaster to control your source device. This allows full control of your source from any connected display.
• Төмөн күтүү: The system is engineered for ultra-low latency, making it suitable for applications requiring minimal delay, such as gaming or live presentations.

5. Өзгөчөлүктөрү

The OREI UHD14-EX230-K offers a robust set of features for high-quality HDMI distribution:

• 4K@60Hz HDMI Over Ethernet: Seamlessly transmits one HDMI source to four HDMI displays.
• Кеңейтилген диапазон: Extends 4K@60Hz up to 200 ft or 4K@30Hz up to 230 ft over a single CAT6/7/8 network cable.
• Built-in Splitter: Distributes the HDMI signal to four outputs simultaneously.
• HDMI Loop-Out: Provides an additional HDMI output on the Transmitter for local monitoring.
• HDCP 2.2 Compliant: Корголгон мазмун менен шайкештикти камсыз кылат.
• Өркүндөтүлгөн EDID башкаруу: Optimizes display compatibility and performance.
• Bi-directional IR Control: Allows control of the source device from remote locations and vice-versa.
• 18 Gbps HDR Pass-Through: Supports HDR, HDR10, HDR10+, Dolby Vision, and HLG for stunning visuals.
• Power-over-Cable (PoC): Powers Receiver units directly from the Transmitter via CAT cable, simplifying installation.
• Plug-and-Play: Requires no software or drivers for installation.
• Туруктуу металл корпус: Provides robust protection for the units.

Image: A visual summary of the OREI UHD14-EX230-K's key features, including HDCP 2.2 compliance, 4K@60Hz video resolution, 18Gbps bandwidth, 230ft extension, loop output, PoC, and plug-and-play functionality.

6. Техникалык шарттар

Image: A graphic detailing the compact and lightweight design of the OREI UHD14-EX230-K units, including dimensions, weight, material (metal enclosure), and color (black).

7. Кыйынчылыктарды

• Сүрөт жок/сигнал:
  • Ensure all HDMI and CAT cables are securely connected.
  • Verify the Transmitter unit is powered on and its power indicator is lit.
  • Check if the CAT cables are of high quality (CAT6/7/8) and within the specified length limits.
  • Try connecting the HDMI source directly to a display to confirm the source is working correctly.
  • Power cycle all devices (source, extender, displays).
• Сүрөттүн сапаты начар:
  • Ensure you are using high-quality HDMI and CAT cables.
  • Check cable lengths against specifications; excessive length can degrade signal quality.
  • Verify that your displays support the output resolution of your source.
• Инфракызыл башкаруу иштебей жатат:
  • Ensure IR Blaster and IR Receiver cables are correctly plugged into their respective ports (IR OUT on Transmitter, IR IN on Receivers).
  • Position the IR Blaster eye directly over or very close to the IR sensor of your source device.
  • Ensure the IR Receiver eye at the remote location is unobstructed and facing your remote control.
• Үзүлгүс сигнал:
  • Кабелдик туташуулардын боштугун текшериңиз.
  • Ensure CAT cables are not bent sharply or damaged.
  • Minimize electromagnetic interference by keeping CAT cables away from power lines or other electronic devices.

8. Техникалык тейлөө

To ensure the longevity and optimal performance of your OREI UHD14-EX230-K system, follow these maintenance guidelines:

• Тазалоо: Use a soft, dry cloth to clean the units. Avoid using liquid or aerosol cleaners.
• Вентиляция: Ensure adequate airflow around the units to prevent overheating. Do not block ventilation openings.
• Курчап турган чөйрө: Operate the units in a dry environment, away from direct sunlight, high temperatures, and humidity.
• Кабелдик башкаруу: Organize cables neatly to prevent damage and ensure stable connections.

9. Кепилдик жана колдоо

The OREI UHD14-EX230-K comes with a 1-year OREI manufacturer's warranty, ensuring reliable AV distribution. Additionally, OREI provides lifetime technical support for this product.

• Кепилдик камтуу: Covers defects in materials and workmanship under normal use for one year from the date of purchase.
• Техникалык колдоо: For any technical assistance or troubleshooting, please contact OREI customer support. Refer to the included user manual for contact details or visit the official OREI webсайт.