POMIACAM CCTV Camera Tester HD-2950 Instruction Manual

1. Киришүү

The POMIACAM HD-2950 is a versatile 5-inch TFT-LCD CCTV camera tester designed for the installation and maintenance of HD coaxial cameras. It supports 8MP AHD, CVI, TVI, and Analog CVBS camera testing. This device also includes functions such as UTP cable testing, HDMI and VGA input, RS485 PTZ control, audio testing, and 12V power output, making it an essential tool for security system professionals.

Important Note: This device does not support IP network cameras.

Figure 1: Warning indicating that IP cameras are not supported by the HD-2950 tester.

2. Продукциянын өзгөчөлүктөрү

• 8MP AHD/CVI/TVI/Analog CVBS Camera Test: Automatically recognizes camera types and displays resolution and frame rate. Supports coaxial PTZ and OSD menu calls.
• VGA & HDMI Input: Features 1 channel HDMI signal input (max 4K 30FPS) and 1 channel VGA video signal input (max 1920×1200P 60FPS).
• CVBS Video Signal Test: Includes 1 channel BNC input (NTSC/PAL auto adapt), PTZ control (RS485, 600-115200bps, 30+ protocols), and 1 channel audio signal input for audio testing.
• UTP Cable Tester: Tests UTP cable continuity, detects faulty RJ45 cable pins, and measures network cable length up to 3000 meters.
• Display & Battery: Equipped with a 5-inch TFT-LCD screen (800x480 resolution, non-touch). Built-in 3.7V 4000mAh Li-ion battery provides approximately 8 hours of working time after 5 hours of charging.
• Чыгуу кубаттуулугу: Provides DC12V/1A power output for cameras.
• LED жарык: Integrated LED light for working in dark environments.

Figure 2: ашыкview of the HD-2950 CCTV Tester's main features and supported technologies.

3. Пакеттин мазмуну

The following items are included in your POMIACAM HD-2950 CCTV Camera Tester package:

• 1x CCTV Camera Tester (HD-2950)
• 1x заряддагыч
• 1x Li-ion battery (built-in)
• 1x DC 5V power cable
• 1x Safety cord/Wrist belt
• 1x Audio test cable
• 1x BNC cable
• 1x RS485 Control cable
• 1x Power output cable
• 1x DC 12V 1A adapter
• 1x Cable tester (remote unit)

Figure 3: Visual representation of the HD-2950 CCTV Tester and its included accessories.

4. Түзмөк бүттүview

4.1. Баскычтар жана көрсөткүчтөр

Сүрөт 4: Алдыңкы view of the HD-2950 with numbered callouts for buttons and indicators.

1. RS485 Data Transmission Indicator: Lights up during RS485 communication.
2. Заряддоо көрсөткүчү: Заряддоо абалын көрсөтөт.
3. Күч көрсөткүчү: Shows the device's power status.
4. Чоңойтуу баскычтары: Adjust the digital zoom level of the video feed.
5. Фокус баскычтары: Adjust the focus of the connected camera (if supported).
6. Ырастоо баскычы: Тандоолорду ырастайт же менюга кирет.
7. PTZ Control Buttons: Navigate and control Pan/Tilt/Zoom functions of PTZ cameras.
8. Return/Close Button: Navigates back or closes current menu/function.
9. Орнотуу баскычы: Accesses settings or specific function parameters.

4.2. Порттар жана байланыштар

5-сүрөт: үстү жана асты views of the HD-2950 highlighting input/output ports.

• DC12V/1A кубаттуулук чыгышы: Provides power to connected cameras.
• HDMI киргизүү: For connecting external HDMI video sources (up to 4K 30FPS).
• AHD CVI TVI CVBS IN (BNC): Main input for coaxial camera signals.
• Жарык: Камтылган LED кол чырагы.
• RS485 порт: For PTZ control and data communication.
• Аудио кирүү: For connecting audio input from cameras or other devices.
• UTP/SCAN (RJ45): For UTP cable testing.
• VGA киргизүү: For connecting external VGA video sources (up to 1920×1200P 60FPS).
• DC5V/2A Power Input (Type-C): Аппаратты заряддоо үчүн.

5. Орнотуу

5.1. Аппаратты заряддоо

Before initial use, fully charge the HD-2950. Connect the provided DC5V/2A charger to the Type-C power input port. The charging indicator will illuminate. A full charge typically takes approximately 5 hours and provides up to 8 hours of normal operation.

Figure 6: Battery charging and working time details for the HD-2950.

5.2. Күйгүзүү / Өчүрүү

Press and hold the Power button (refer to Figure 5) for a few seconds to turn the device on or off. The Power indicator will show the device's status.

6. Операция

6.1. Coaxial Camera Test (AHD/CVI/TVI/CVBS)

Connect your AHD, CVI, TVI, or CVBS analog camera to the "AHD CVI TVI CVBS IN" BNC port using a BNC cable. The HD-2950 will automatically detect the camera type, resolution, and frame rate. You can navigate the camera's OSD menu and control PTZ functions (if supported by the camera) using the device's buttons.

Figure 7: Auto HD function recognizing camera type and displaying PTZ settings.

8-сүрөт: Жандуу view from an 8MP coaxial camera being tested by the HD-2950.

Видео демонстрация: How Analog 4 IN 1 (TVI-AHD-CVI-CVBS) Camera Test

6.2. UTP кабелин текшерүү

To test UTP cable continuity, connect one end of the RJ45 cable to the "UTP/SCAN" port on the tester and the other end to the remote cable tester unit. The screen will display the continuity status of each pin. An "X" indicates a defective pair. For accurate length measurement, ensure the remote end of the cable is not connected to any other device.

Figure 9: UTP cable testing interface, showing pin mapping and fault detection.

6.3. RS485 PTZ Control

Connect the RS485 control cable from the tester's RS485 port to the PTZ camera. Use the PTZ Control buttons (refer to Figure 4) to adjust the camera's pan, tilt, and zoom. Access the PTZ settings menu to configure protocols, baud rate, and address if needed.

Figure 10: PTZ control interface showing options for coaxial and RS485 protocols.

6.4. HDMI & VGA Input

The HD-2950 can serve as a display for external video sources. Connect an HDMI cable to the "HDMI IN" port or a VGA cable to the "VGA Input" port to view video from DVRs, NVRs, or other compatible devices. The tester supports HDMI input up to 4K 30FPS and VGA input up to 1920×1200P 60FPS.

Figure 11: Demonstrates connecting the HD-2950 to a DVR/NVR using VGA and HDMI inputs.

6.5. Аудио тест

Connect the audio output from your camera or audio pickup device to the "Audio In" port on the tester using the provided audio test cable. This allows you to verify if the audio signal is functioning correctly.

6.6. 12V Power Output

The HD-2950 can supply DC12V/1A power to a camera directly from its "DC12V/1A Power Output" port. This is useful for powering cameras during installation or testing without needing an external power supply.

7. Техникалык тейлөө

• Аппаратты чаңдан жана нымдан таза, таза кармаңыз.
• Аппаратты жерге түшүрүүдөн же катуу таасирлерден сактаныңыз.
• Аппаратты колдонбогондо салкын, кургак жерде сактаңыз.
• Regularly charge the battery to maintain its lifespan, even if not in frequent use.

8. Кыйынчылыктарды

8.1. Black and White Image Display

If the camera image appears black and white, it may indicate that the signal type (AHD, CVI, TVI, CVBS) does not correspond between the camera and the tester. Use the tester's menu to manually switch the signal type to match the connected camera. This should resolve the issue.

Видео демонстрация: HD-2950 Auto HD TVI/CVI/AHD Coaxial Camera Tester

Видео демонстрация: Auto HD TVI/CVI/AHD/CVBS CCTV Tester Monitor

Видео демонстрация: CCTV tester monitor

Видео демонстрация: SGEF Operation video, CCTV Tester, Camera Debugging Helper

9. Техникалык шарттар

10. Кепилдик жана колдоо

For warranty information and technical support, please refer to the documentation provided with your purchase or contact POMIACAM customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.