LEDOne Corp LED Wall Pack Instruction Manual

1. Киришүү

This manual provides comprehensive instructions for the installation, operation, and maintenance of the LEDOne Corp Multi-Watt LED Wall Pack. This fixture is designed for demanding outdoor lighting applications, offering selectable wattage (80W, 100W, 120W) and adjustable color temperature (3000K, 4000K, 5000K) to meet various lighting requirements efficiently.

2. Коопсуздук маалыматы

ЭСКЕРТҮҮ: Электр тогуна урунуу коркунучу бар. Орнотуу бардык улуттук жана жергиликтүү электр эрежелерине ылайык квалификациялуу электрик тарабынан жүргүзүлүшү керек.

• Орнотуудан же тейлөөдөн мурун автоматтык өчүргүчтөн электр кубатын өчүрүңүз.
• камсыз кылуу voltage арматуранын иштөө көлөмүнө шайкеш келетtage (120-277V).
• Кубатталган шаймандарды суу кол менен же суу же нымдуу жерде турганда кармабаңызamp беттер.
• Use only UL/ETL approved components and wiring methods.
• Жыгылып кетпеш үчүн арматура бекем орнотулганын текшериңиз.
• Жарык күйүп турганда LED жарык булагына түз карабаңыз.

3. Пакеттин мазмуну

Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:

• LEDOne Corp LED Wall Pack Fixture
• Көрсөтмө (бул документ)
• Монтаждоочу жабдык

4. Техникалык шарттар

5. Орнотуу жана орнотуу

The LEDOne Corp Wall Pack is designed for wall mounting and compatibility with standard junction boxes. Follow these steps for secure installation:

1. Даярдоо: Ensure power is disconnected at the circuit breaker. Gather necessary tools (screwdriver, wire strippers, drill, mounting hardware).
2. Монтаждоо жери: Select a suitable wall surface capable of supporting the fixture's weight (approximately 10.63 lbs). The fixture features reinforced mounting points.
3. Монтаждык кронштейн: Attach the wall mount bracket (if separate) or position the fixture directly over the junction box. Mark and drill pilot holes for the mounting screws.
4. Коопсуз арматура: Secure the fixture to the wall using the provided mounting hardware. Ensure it is firmly attached and level.
5. Зымдар: Open the wiring compartment. Connect the fixture's wires to the supply wires from the junction box:
   • Black wire to Line (L)
   • White wire to Neutral (N)
   • Green wire to Ground (G)
   Use the provided waterproof wire nuts for secure outdoor connections. For 0-10V dimming, connect the purple wire to DIM+ and the gray wire to DIM-.
6. Жабуу бөлүм: Carefully tuck all wires into the junction box and wiring compartment. Close and seal the compartment cover to maintain IP65 rating.
7. Күйгүзүү: Автоматтык өчүргүчтүн кубаттуулугун калыбына келтириңиз жана арматураны сынаңыз.

Сүрөт 1: Арткы view of the LED wall pack, illustrating the mounting points and the central access for electrical wiring connections.

Сүрөт 2: Side profile of the LED wall pack, showing the robust construction and a visible screw for secure mounting.

6. Иштөө нускамалары

The LEDOne Corp Wall Pack features adjustable wattage and color temperature settings, typically controlled by internal switches. These switches are usually located within the wiring compartment or on the side of the LED driver housing, accessible after opening the fixture.

Сүрөт 3: Алдыңкы view of the LED wall pack with the protective lens removed, revealing the array of LED chips and the internal switches for adjusting wattage жана CCT.

1. Жөндөө Wattage:
   • Ensure power is disconnected before opening the fixture.
   • Ваттын ордун табыңызtage selection switch (often labeled WATT or POWER).
   • Каалаган ватты тандаңызtage: 80W, 100W, or 120W.
   • Close the fixture securely before restoring power.
2. Түс температурасын жөндөө (CCT):
   • Ensure power is disconnected before opening the fixture.
   • Locate the CCT selection switch (often labeled CCT or TEMP).
   • Select the desired color temperature: 3000K (warm white), 4000K (cool white), or 5000K (daylight).
   • Close the fixture securely before restoring power.
3. 0-10V караңгылатуу: This fixture supports 0-10V dimming. Connect a compatible 0-10V dimmer to the purple (DIM+) and gray (DIM-) wires during installation.
4. Photocell/Motion Sensor: The fixture may include or be compatible with external photocells or motion sensors for automated operation. Refer to the specific sensor's instructions for integration.

Сүрөт 4: Бурчтуу view of the LED wall pack, showcasing its complete assembly and the illuminated LED array.

7. Техникалык тейлөө

The LEDOne Corp Wall Pack is designed for minimal maintenance. Regular inspection and cleaning will ensure optimal performance and longevity.

• Тазалоо: Periodically clean the outer lens and housing with a soft, damp cloth to remove dirt, dust, and debris. Do not use abrasive cleaners or solvents. Ensure power is off before cleaning.
• Текшерүү: Annually inspect the fixture for any signs of physical damage, loose connections, or wear on the wiring. Address any issues promptly.
• Мөөрлөр: Ensure all seals and gaskets are intact to maintain the IP65 weatherproof rating.

8. Кыйынчылыктарды

Эгерде шайман туура иштебей жатса, төмөнкү кеңири таралган көйгөйлөрдү жана чечимдерди караңыз:

If troubleshooting steps do not resolve the issue, contact LEDOne Corp customer support.

9. Кепилдик маалыматы

The LEDOne Corp Multi-Watt LED Wall Pack is backed by a comprehensive 5 жылдык кепилдик. This warranty covers defects in materials and workmanship under normal use and service. For warranty claims or detailed terms and conditions, please contact LEDOne Corp customer support.

10. Колдоо жана байланыш

For further assistance, technical support, or inquiries regarding your LEDOne Corp product, please visit the official LEDONE Store or contact customer service:

Visit the LEDONE Store on Amazon