diymore Wireless USB-C Soldering Iron Kit

1. Киришүү

This manual provides essential information for the safe and effective use of your diymore Wireless USB-C Soldering Iron Kit. This portable soldering iron features a built-in 1100 mAh battery, rechargeable via USB-C, offering cordless operation. It includes an LCD display for precise temperature control, adjustable from 180℃ to 450℃ (356°F to 842°F), and boasts rapid heating in approximately 8 seconds. It is designed for various applications such as circuit board repair, jewelry soldering, guitar maintenance, watch repair, and other small electronic DIY projects. Please read this manual thoroughly before first use.

2. Коопсуздук нускамалары

Жарааттарды же аппаратты бузууну болтурбоо үчүн ар дайым төмөнкү коопсуздук чараларын сактаңыз:

• Жылуулук коркунучу: The soldering iron tip reaches high temperatures. Avoid direct contact with skin or flammable materials.
• Вентиляция: Use in a well-ventilated area to avoid inhaling soldering fumes.
• Көздү коргоо: Always wear safety glasses to protect against solder splashes.
• Туура колдонуу: Only use the device for its intended soldering purpose. Do not use for high-power projects.
• Сактагыч: Allow the soldering iron to cool completely before storing. Store in a safe place, out of reach of children.
• Кубат булагы: Use only a 5V/2A USB-C power source for charging.
• Зыян: Эгерде түзмөк же кабель бузулган болсо, аны иштетпеңиз.

3. Пакеттин мазмуну

Пакетиңизде бардык буюмдар бар экенин текшериңиз:

• 1 x USB Soldering Iron
• 1 х USB-C кубаттоо кабели
• 1 x Soldering Iron Stand with Sponge
• 3 x Soldering Tips (Round, Horseshoe, Knife Head)
• 1 x Rosin

Figure 3.1: Included components of the diymore Wireless USB-C Soldering Iron Kit.

4. Продукт бүтүп калдыview

Familiarize yourself with the main parts of your soldering iron:

• Soldering Tip: The interchangeable heating element and tip.
• Tip Connector: Where the soldering tip is inserted.
• LCD дисплей: Shows current temperature, battery status, and error codes.
• Кубат баскычы: Аппаратты күйгүзүү/өчүрүү үчүн колдонулат.
• Температураны жөндөө баскычтары (+/-): Used to increase or decrease the temperature.
• USB-C заряддоо порту: Заряддоо кабелин туташтыруу үчүн.
• туткасы: Ergonomically designed, heat-resistant TPE material.

Figure 4.1: ашыкview of the soldering iron's controls and display.

Figure 4.2: Physical dimensions and summarized features of the soldering iron.

5. Орнотуу

5.1. Ширетүүчү үтүктү заряддоо

Before first use, fully charge the soldering iron. Connect the provided USB-C charging cable to the soldering iron's USB-C port and to a 5V/2A USB power adapter (not included). The LCD display will show the battery percentage during charging. A full charge takes approximately 90 minutes and provides 20-30 minutes of continuous operation.

Figure 5.1: USB-C charging and battery specifications.

5.2. Installing/Replacing Soldering Tips

The soldering iron comes with three interchangeable tips: Round, Horseshoe, and Knife Head. To install or replace a tip:

1. Ширетүүчү үтүктүн өчүрүлгөнүн жана муздаганын текшериңиз.
2. Gently pull out the current tip from the tip connector.
3. Insert the desired tip firmly into the tip connector until it is securely seated.

Figure 5.2: Replacing soldering iron tips.

6. Иштөө нускамалары

6.1. Күйгүзүү/өчүрүү

To turn the soldering iron ON or ӨЧҮРҮҮ, press and hold the Power button for 3 seconds.

6.2. Температураны жөндөө

Once powered on, the LCD will display the current temperature. The soldering iron heats up rapidly, reaching the set temperature in approximately 8 seconds.

• Increase/Decrease Temperature: Click the "+" or "-" button to adjust the temperature by 5℃ (or 9°F) increments. Press and hold the "+" or "-" button for rapid temperature adjustment.
• Switch ℃/°F: Press the "+" and "-" buttons simultaneously to switch between Celsius and Fahrenheit display modes.

Figure 6.1: Intelligent temperature control display.

Figure 6.2: Fast heating performance.

6.3. Sleep Mode and Automatic Shutdown

The soldering iron is equipped with intelligent power management features:

• During Battery Discharge:
  • After 1 minute of inactivity, the device enters sleep mode (display turns OFF).
  • After 5 minutes of inactivity, the device performs an automatic shutdown.
• During Charging and Use:
  • After 3 minutes of inactivity, the device enters sleep mode (display shows OFF + % flicker).
  • After 5 minutes of inactivity, the device performs an automatic shutdown. The battery percentage will flash during charging.
• Wake-up Method: To wake the device from sleep mode, click any temperature adjustment button or gently vibrate the device.

7. Техникалык тейлөө

Regular maintenance ensures optimal performance and longevity of your soldering iron.

• Кеңеш тазалоо: Regularly clean the soldering tip using the provided sponge (dampened with water) to remove excess solder and oxidation. This helps maintain efficient heat transfer.
• Кеңешти алмаштыруу: Replace soldering tips when they become worn or damaged to ensure proper soldering results. Refer to Section 5.2 for replacement instructions.
• Сактагыч: Always allow the soldering iron to cool down completely before storing it in its case or a safe place.
• Жалпы тазалоо: Wipe the body of the soldering iron with a dry, soft cloth. Do not use abrasive cleaners or solvents.

8. Кыйынчылыктарды

Бул бөлүм сиз кабылышы мүмкүн болгон жалпы көйгөйлөрдү карайт:

Figure 8.1: Display codes for troubleshooting.

9. Техникалык шарттар

10. Кепилдик жана колдоо

For warranty information or technical support, please refer to the retailer's return policy or contact diymore customer service directly. Contact details can typically be found on the product packaging or the official diymore webсайт.