Furmax WD091 7-Drawer Dresser

Introduction

Thank you for choosing the Furmax WD091 7-Drawer Dresser. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and proper use of your new furniture. Please read this manual thoroughly before beginning assembly and retain it for future reference.

Коопсуздук маалыматы

Маанилүү: Furniture tip-over can cause serious or fatal crushing injuries. To prevent tip-over, this product must be permanently attached to the wall using the anti-tipping device provided. Always ensure the anti-tipping device is correctly installed before using the dresser.

This image illustrates the proper installation of the anti-tipping device to secure the dresser to a wall, preventing accidental tip-over. The top diagram shows the device correctly installed, while the bottom diagram shows a dresser tipping over when the device is not installed.

• Балдардын тартмаларга же текчелерге чыгуусуна жол бербеңиз.
• Бир эле учурда бирден ашык суурманы ачпаңыз.
• Оор нерселерди эң ​​төмөнкү тартмаларга салыңыз.
• Ар дайым монтаждоо көрсөтмөлөрүн кылдаттык менен аткарыңыз.

Жайгашуу

Баштоодон мурун

Inspect all components for damage before assembly. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.

Керектүү куралдар

• Phillips баш бурагыч (киргизилген эмес)
• Балка (киргизилген эмес)
• Drill (for anti-tipping device installation, if needed)

Пакеттен чыгаруу

Carefully remove all components from the packaging. Lay them out on a soft, clean surface (e.g., a blanket or carpet) to prevent scratches during assembly. Keep all small parts, such as screws and dowels, in a designated area to avoid loss.

Монтаждоо көрсөтмөлөрү

Refer to the separate assembly manual included in your package for step-by-step instructions specific to your dresser model. Ensure all connections are secure but do not overtighten screws, which can damage the wood. Pay close attention to the orientation of each piece as indicated in the diagrams.

Чакырууга каршы түзүлүштү орнотуу: After assembling the dresser, install the anti-tipping device as shown in the safety information section. This is a critical safety step.

Operating Your Dresser

тартма колдонуу

The drawers are equipped with smooth sliding rails for easy opening and closing. To operate, gently pull the metal handle to open and push to close. Avoid forcing drawers, especially if they feel stiff or misaligned.

This image highlights the metal handles and smooth slide rails of the dresser drawers, indicating ease of use and durability.

Салмак сыйымдуулугу

The dresser top has a weight capacity of approximately 250 lbs. Each drawer has a weight capacity of approximately 22 lbs. Do not exceed these limits to ensure stability and prevent damage.

This diagram provides key product dimensions and specifies the weight capacity for the dresser top (250 lbs) and each drawer (22 lbs).

Сактоо жана жайгаштыруу

This dresser is suitable for various rooms, including bedrooms, living rooms, hallways, and entryways. Its design allows it to accommodate a TV up to 65 inches on its top surface. The seven drawers offer ample storage for a variety of items.

This image demonstrates the versatile storage capabilities of the dresser drawers, suitable for items like T-shirts, dresses, pants, pillows, snacks, books, jewelry, and towels.

Техникалык тейлөө

Тазалоо жана кам көрүү

The dresser surface is designed to be waterproof and easy to clean. For general cleaning, wipe the surface with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish. Promptly wipe up any spills to prevent staining.

Үзгүлтүксүз текшерүү

Periodically check all screws and fasteners to ensure they remain tight. Retighten if necessary. Inspect the anti-tipping device to confirm it is still securely attached to both the dresser and the wall.

Проблемаларды чечүү

Drawer Sticking or Not Closing Smoothly

• Текшерүү тегиздөө: Ensure the drawer is properly seated on its slides. Remove the drawer and reinsert it, making sure it aligns with both rails.
• Слайддарды текшерүү: Look for any obstructions or damage to the drawer slides. Clear any debris.
• Бурамаларды бекемдөө: Verify that all screws securing the drawer slides to the dresser frame and the drawer box are tight. Loose screws can cause misalignment.
• Ашыкча жүктөө: Ensure the drawer is not overloaded, as this can cause it to sag and stick.

Dresser Instability

• Чакырууга каршы түзмөк: Confirm the anti-tipping device is correctly installed and securely fastened to the wall.
• Деңгээл беттик: Ensure the dresser is placed on a flat, level surface. Adjust any leveling feet if present.
• Байланыштарды бекемдөө: Check and tighten all assembly screws throughout the dresser frame.

Техникалык шарттар

Кепилдик жана колдоо

Кепилдик маалымат

This product comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase or contact Furmax customer service for specific details regarding coverage and duration.

Кардарларды колдоо

If you have any questions, require assistance with assembly, or encounter any issues with your Furmax dresser, please contact Furmax customer support. Contact information can typically be found on the product packaging or the official Furmax webсайт.