PGST PG103-C+T53 Home Security Alarm System User Manual

1. Киришүү

This manual provides detailed instructions for the installation, operation, and maintenance of your PGST PG103-C+T53 Home Security Alarm System. Please read this manual thoroughly before using the system to ensure proper functionality and safety.

2. Пакеттин мазмуну

Төмөндө тизмеленген нерселердин баары пакетиңизге камтылганын текшериңиз:

• 1 x PGST Control Panel (Alarm Host)
• 2 x Кыймыл сенсорлору
• 4 х эшик/терезе сенсорлору
• 2 x RFID карталары
• 2 x Алыстан башкаруу
• 1 x Коопсуздук камерасы
• 1 x 64GB SD карта
• 1 x Power Adapter for Control Panel
• 1 х Колдонуучунун колдонмосу (бул документ)

Image 2.1: All components included in the PGST PG103-C+T53 Home Security Alarm System kit.

3. Орнотуу жана орнотуу

3.1. Башкаруу панелин орнотуу

1. Кубат туташуу: Connect the control panel to a power outlet using the provided power adapter. The panel includes a backup lithium-ion battery.
2. Баштапкы күйгүзүү: The panel will power on automatically. Follow the on-screen prompts for initial setup.
3. Жайгашкан жери: Install the control panel in a central location within your home, away from direct sunlight and moisture, and within Wi-Fi range.

Сүрөт 3.1: Мисample placement of the PGST Control Panel.

3.2. App Integration (Smart Life / Tuya Smart)

1. Колдонмону жүктөп алуу: Download the "Smart Life" or "Tuya Smart" app from your mobile device's app store.
2. Каттоо эсебин түзүү: Жаңы аккаунтка катталыңыз же сизде мурунтан эле бар болсо кириңиз.
3. Түзмөк кошуу: In the app, tap "+" to add a new device. Select "Security & Video Surveillance" then "Alarm (Wi-Fi)".
4. Wi-Fi'га туташуу: Follow the in-app instructions to connect the control panel to your 2.4GHz Wi-Fi network. (5GHz Wi-Fi is not supported).

Image 3.2: The Smart Life app interface for managing your security system.

3.3. Сенсорду орнотуу жана жупташтыруу

All sensors are pre-paired with the control panel. If re-pairing is needed, refer to the control panel's on-screen menu or app instructions.

3.3.1. Кыймыл сенсорлору

• Жайгашкан жери: Install motion sensors in corners of rooms, hallways, or areas where intruders would likely pass. Mount them at a height of 6-8 feet (1.8-2.4 meters) for optimal detection.
• Качуу: Do not place near heat sources, direct sunlight, or areas with significant air drafts.
• аныктоо диапазону: Each motion sensor has a detection range of approximately 32 feet (10 meters) and a 110° field of view.

Image 3.3: Motion sensor detection range and field of view.

3.3.2. Эшик/терезе сенсорлору

• Орнотуу: Mount the main sensor unit on the door or window frame and the smaller magnet unit on the moving part (door or window). Ensure the two parts are aligned and within 0.5 inches (1.2 cm) of each other when the door/window is closed.
• Коопсуз тиркеме: Use the provided adhesive pads or screws for secure installation.

Сүрөт 3.4: Мисamples of door/window sensor installation.

3.4. Remote Controls and RFID Cards

• Алыстан башкаруу каражаттары: Use the remote controls to arm, disarm, or trigger an emergency alarm. Buttons are typically labeled for these functions.
• RFID карталары: Tap an RFID card on the designated area of the control panel to quickly arm or disarm the system.

Image 3.5: Using an RFID card for quick system control.

3.5. Security Camera Setup

Refer to the separate manual provided with the security camera for detailed setup instructions. Once configured, the camera can often be integrated and viewed through the Smart Life/Tuya Smart app.

3.6. 4G SIM Card Installation (Optional)

For SMS and phone call alerts, insert a 2G/3G/4G SIM card into the designated slot on the control panel. Ensure the SIM card is active and has sufficient credit/data. Note that telephone and SMS services may incur additional fees from your mobile carrier.

Image 3.6: Connectivity options: Wi-Fi for app alerts and 4G/GSM for calls/SMS (SIM card not included).

4. Операция

4.1. Системаны куралдандыруу жана куралсыздандыруу

• Кол (Алыскы режим): Activates all sensors. Use when leaving the property. Can be done via control panel, remote, RFID card, or app.
• Куралсыздандыруу: Deactivates all sensors. Use when returning home. Can be done via control panel, remote, RFID card, or app.
• Home Mode (Stay Arm): Activates perimeter sensors (e.g., door/window sensors) while allowing free movement inside. Check app settings for configuration.

Сүрөт 4.1: Мисample of scheduled arming and disarming for daily routines.

4.2. Эскертүүлөр жана эскертмелер

• Сирена: If a sensor is triggered while armed, the 120dB siren will activate to deter intruders.
• Колдонмо эскертмелери: Receive real-time alerts on your smartphone via the Smart Life/Tuya Smart app.
• Phone Calls/SMS: If a SIM card is installed and configured, the system can send SMS messages and make calls to pre-set emergency contacts.

Сүрөт 4.2: Мисample of real-time alarm notifications on a smartphone.

4.3. Alexa менен үн менен башкаруу

To enable voice control, link your Smart Life/Tuya Smart account with Amazon Alexa. Once linked, you can use voice commands such as "Alexa, arm my home" or "Alexa, disarm my home" (a PIN may be required for disarming).

Image 4.3: Integrating the alarm system with Amazon Alexa for voice control.

4.4. Анти-Тamper Function

The control panel features a physical anti-tamper mechanism. Any forced removal or tampering with the panel will trigger an immediate alarm. The alarm can only be stopped by entering the correct password on the panel.

4.5. Системаңызды кеңейтүү

The PGST system supports up to 99 additional sensors. To add new sensors, refer to the "Add Device" section in the Smart Life/Tuya Smart app or the control panel's settings menu.

5. Техникалык тейлөө

5.1. Батареяны алмаштыруу

• Башкаруу панели: The control panel has a built-in rechargeable lithium-ion battery for backup power. It charges automatically when connected to AC power.
• Сенсорлор: Motion sensors and door/window sensors are battery-powered. The app or control panel will indicate low battery status. Replace batteries with the specified type (usually CR2032 or AAA, check individual sensor labels).
• Алыстан башкаруу каражаттары: Remote controls use button cell batteries. Replace when functionality decreases.

5.2. Тазалоо

Wipe the control panel and sensors with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the devices.

6. Кыйынчылыктарды

7. Техникалык шарттар

8. Кепилдик жана колдоо

For warranty information and technical support, please refer to the documentation included with your purchase or contact PGST customer service directly. Contact details can typically be found on the manufacturer's webсайт же продукт таңгак.

Online resources and FAQs may also be available through the Smart Life or Tuya Smart app support sections.