DURATECH 20V 18GA Cordless Brad Nailer and Staple Gun Instruction Manual

1. Коопсуздук маалыматы

ЭСКЕРТҮҮ: Бул куралды иштетүүдөн мурун ар дайым бардык коопсуздук эскертүүлөрүн жана нускамаларын окуп, түшүнүңүз. Эскертүүлөрдү жана нускамаларды аткарбоо электр шокуна, өрткө жана/же олуттуу жаракатка алып келиши мүмкүн.

• Бул продуктуну иштетип жатканда ар дайым коргоочу көз айнек же каптал калканчтары бар коргоочу көз айнек тагыныңыз жана зарылчылыкка жараша бетти толук коргоңуз.
• To avoid accidental firing, keep fingers AWAY from triggers when not driving fasteners.
• Do not alter or remove triggers.
• NEVER point the tool at yourself or others in the work area when connecting the battery and when using or handling the tool. Failure to follow warnings could result in DEATH or SERIOUS INJURY.
• To avoid battery over-discharge and potential damage, recharge the device at least once every three months.

2. Продукт бүтүп калдыview

Пакеттин мазмуну

• Зымсыз Брэд Найлер
• 1000pcs 1-1/4" Staples
• 1000pcs 1-9/16" Nails
• 2.0Ah Li-ion батареясы
• 1 сааттык тез заряддагыч
• Ташуу кутусу
• Instruction Manual

Курал компоненттери

Figure 1: Labeled components of the DURATECH 20V 18GA Cordless Brad Nailer.

Өлчөмдөрү жана Салмагы

Figure 2: Physical dimensions and weight of the nailer (without battery).

• Узундугу: 10.83 дюйм (27.5 см)
• Туурасы: 9.45 дюйм (24 см)
• Weight: 6.19 lbs (without battery)

3. Орнотуу

Батарея орнотуу

1. Ensure the battery is fully charged using the provided 1-hour quick charger.
2. Батареяны шаймандагы батарея уячасы менен тегиздеңиз.
3. Батареяны ордуна бекем чыккыча жылдырыңыз.

Loading Fasteners (Nails/Staples)

Figure 3: Steps for inserting staples or nails into the magazine.

1. Бошотуу баскычын басып, журналдын капкагын чыгарыңыз.
2. Tilt the tool and place nails/staples into the track of the magazine channel. Ensure the fastener points are placed against the bottom of the magazine.
3. Журналдын капкагын чыгаруу баскычы менен кармашканга чейин жабыңыз.

Тырмак Viewer Терезе

мык viewer window allows you to quickly check the fastener level. When the window shows кызыл, it indicates the magazine is without nails. When it shows кара, it indicates the magazine contains nails.

4. Иштөө нускамалары

Атуу режимдери

The nail gun features two firing modes: Single Firing Mode and Contact Firing Mode. Select the desired mode using the switch located near the LED indicator.

Figure 4: Firing mode selection switch.

Жалгыз режим

• Shift the mode switch to the сол жагы (single firing icon).
• Depress the contact pin against the workpiece.
• Squeeze the trigger to fire a single fastener.

Байланыш атуу режими

• Shift the mode switch to the оң жагы (contact firing icon).
• Триггерди кысыңыз.
• Depress the contact pin against the workpiece to fire fasteners continuously as the tool is moved along the surface.

Эскертүү: If the contact pin is not depressed against the workpiece before squeezing the trigger (in single firing mode) or if the trigger is not squeezed before depressing the contact pin (in contact firing mode), the nail gun will not shoot fasteners due to the safety protection device.

Тереңдикти жөндөө

Adjust the fastener driving depth using the depth adjustment wheel located near the contact pin. Turning the wheel allows you to set the desired depth for various materials and applications.

Figure 5: Depth adjustment wheel.

LED жарыктандыруу

The tool is equipped with LED lights on both sides to illuminate the work area, which is particularly useful in low-light conditions. The LED lighting can be activated via the LED Lighting & Indicator Switch.

Figure 6: LED lighting for the work area.

LED көрсөткүч

The LED indicator provides visual feedback on the tool's status:

Figure 7: LED indicator and its meanings.

• Кызыл күйүк: Батарея аз.
• Кызыл жаркылдоо: Nails/staples are jammed.
• Жашыл күйүк: No nails/staples in the magazine.
• Жашыл жаркылдаган: Ашыкча ысып кетүү.
• Жарык өчүк: Кадимки иштөө абалы.

Расмий продукт Video

Video 1: This official video demonstrates the product's features, including loading fasteners, LED indicators, firing modes, and depth adjustment.

5. Техникалык тейлөө

Clearing Jammed Fasteners

If the LED indicator turns red and flashes, it signifies that nails/staples are jammed. Follow these steps to clear the jam:

Figure 8: Quick Release Mechanism.

1. Remove the battery from the tool to prevent accidental firing.
2. Open the magazine using the quick release mechanism.
3. Carefully remove any jammed nails or staples from the magazine channel. A small tool like a screwdriver may be used to assist, but ensure it does not damage the tool.
4. Close the magazine and reinsert the battery.

Батареяга кам көрүү

• Always use the provided DURATECH 20V Li-ion battery and charger.
• Recharge the battery at least once every three months to prevent over-discharge and potential damage, even if not in use.
• Батареяны кургак, салкын жерде, түз күндүн нурунан жана өтө температурадан алыс сактаңыз.

6. Кыйынчылыктарды

Refer to the LED Indicator section (Section 4) for common issues and their corresponding indicator lights. If the issue persists after following the recommended steps (e.g., clearing jams, recharging battery), please contact customer support.

7. Техникалык шарттар

Compatible Fasteners

Figure 9: Compatible nail and staple types.

8. Кепилдик жана колдоо

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official DURATECH website. Ensure you have your model number (024009) and purchase details available when contacting support.