BONTEC Full Motion TV Wall Mount (Model CT140L-FBA) Instruction Manual

1. Продукт бүтүп калдыview

This manual provides comprehensive instructions for the installation, operation, and maintenance of your BONTEC Full Motion TV Wall Mount, Model CT140L-FBA. This mount is designed to securely hold 26-65 inch flat and curved screens, offering extensive adjustability for optimal viewing.

Негизги өзгөчөлүктөр төмөнкүлөрдү камтыйт:

• Ultra-Long Extension: Extends from 2.9 inches to 37.4 inches from the wall.
• Жалпы шайкештик: Supports VESA patterns from 200x200mm to 400x400mm and TVs weighing up to 77 lbs (35 kg).
• Толук кыймылды тууралоо: Allows for +5°/-10° tilt, ±90° swivel, and ±4° leveling.
• Оор жүктүү курулуш: Built from reinforced steel with a three-section five-arm structure for stability.
• Интегралдык кабелдик башкаруу: Includes cable ties to keep wires organized.

2. Коопсуздук маалыматы

WARNING: Read all instructions carefully before installation. Incorrect assembly or installation may result in serious injury or damage.

• Ensure the mounting surface can safely support the combined weight of the mount and your TV.
• This mount is designed for installation on concrete walls, brick walls, or wooden stud walls. Гипсокартонго гана орнотпоңуз.
• Always use appropriate safety equipment, such as eye protection, during installation.
• Орнотуу процессинин кандайдыр бир бөлүгүнө ишенбесеңиз, квалификациялуу адиске кайрылыңыз.
• Орнотуу учурунда балдарды жана үй жаныбарларын жумуш аймагынан алыс кармаңыз.

3. Пакеттин мазмуну

Verify that all components are present before beginning installation. Refer to the included hardware bag for specific screw sizes and quantities.

Типтүү пакеттин мазмуну төмөнкүлөрдү камтыйт:

• Дубал плитасынын жыйындысы
• Сыналгы кронштейнинин колдору
• Mounting Hardware (screws, anchors, washers for various TV and wall types)
• көбүк деңгээли
• Кабель байламталары (5 даана)
• Instruction Manual

4. Техникалык шарттар

5. Орнотуу жана орнотуу

Before you begin, ensure you have the necessary tools: a drill, stud finder (for wood studs), pencil, measuring tape, and a hammer (for concrete/brick anchors). A bubble level is included with the mount.

5.1. Wall and TV Compatibility Check

Confirm your TV's VESA pattern and weight are within the mount's specifications. The mount supports VESA patterns from 200x200mm to 400x400mm and a maximum weight of 77 lbs. This mount is compatible with concrete, brick, and wooden stud walls. Do not install on drywall alone.

This image illustrates the wide compatibility of the mount with various wall types (concrete, wood stud, brick) and VESA patterns, indicating a maximum load capacity of 77 lbs. It explicitly warns against mounting on drywall alone.

5.2. Орнотуу кадамдары

For a detailed visual guide, please watch the official installation video below.

1. Configure and Assemble Monitor Plate: Depending on your TV's VESA pattern, assemble the monitor plate using the provided screws (M-A/B/C/D/E/F) and arms (E, F).
2. Attach VESA Plate to the Back of Your TV: Secure the assembled VESA plate to the back of your TV using the appropriate screws (M-G/H or M-I/J/K) and washers. Ensure a snug fit.
3. Secure the Wall Plate to the Wall:
   • For Wooden Stud Walls: Use a stud finder to locate the center of a wooden stud. Mark the drilling points using the wall plate as a template. Drill pilot holes and secure the wall plate using the provided lag bolts and washers.
   • For Brick or Concrete Walls: Mark the drilling points. Drill holes using a masonry drill bit. Insert the concrete anchors flush with the wall. Secure the wall plate using the provided lag bolts and washers. Avoid drilling into mortar lines between bricks.
4. Hang the TV onto the Wall Plate: Carefully lift your TV with the attached VESA plate and hook it onto the wall plate. Secure the TV to the mount using the safety screws or locking mechanism.

6. Иштөө нускамалары

Your BONTEC Full Motion TV Wall Mount offers versatile adjustments for optimal viewар кандай кызматтардан.

6.1. Adjusting Tilt, Swivel, and Level

• Россия: The mount allows for a tilt range of +5° (upward) to -10° (downward). Use the tool-free tilt mechanism to adjust the vertical viewбурч.
• Айлануучу: The articulating arm allows for a ±90° swivel, enabling you to turn your TV left or right to suit your viewпозиция.
• Деңгээл: If your TV is not perfectly level after installation, you can adjust it by ±4° using the leveling screws on the TV plate.

This image demonstrates the tilt (+5°/-10°) and level (±4°) adjustment features of the full motion TV mount, allowing for flexible screen positioning.

This image illustrates the ±90° swivel function of the mount, highlighting its ability to provide optimal viewing angles from various locations within a room.

6.2. Кабелдик башкаруу

Use the included cable ties to route and secure your TV cables along the articulating arms. This helps maintain a tidy appearance and prevents cables from getting tangled or damaged during adjustments.

This image highlights key design elements of the mount, including the tool-free tilt mechanism, heavy-duty square tube construction, integrated Velcro cable organizer, and smooth brass washers for fluid movement.

7. Техникалык тейлөө

Үзгүлтүксүз техникалык тейлөө телевизоруңуздун дубалга орнотулган жабдыгынын узак мөөнөттүү жана коопсуз иштешин камсыздайт.

• Тазалоо: Чаңды кетирүү үчүн орноткучту жумшак, кургак чүпүрөк менен сүртүңүз. Абразивдүү тазалоочу каражаттарды же эриткичтерди колдонбоңуз.
• Мезгилдүү текшерүүлөр: Annually, check all screws and bolts to ensure they are securely tightened. Over time, vibrations or frequent adjustments can cause fasteners to loosen.
• Майлоо: The mount features smooth brass washers for durable adjustments. No additional lubrication is typically required.

8. Кыйынчылыктарды

If you encounter any issues with your BONTEC TV Wall Mount, refer to the following common problems and solutions:

9. Кепилдик жана колдоо

Your BONTEC TV Wall Mount is covered by a manufacturer's warranty. Please refer to the warranty card included in your package or visit the official BONTEC webдеталдуу кепилдик шарттары жана шарттары үчүн сайт.

For technical support, replacement parts, or any questions regarding your product, please contact BONTEC customer service through their official channels. Contact information can typically be found on the product packaging or the BONTEC webсайт.