Jesverty SPS-1362 Compact AC-to-DC Bench Power Supply User Manual

1. Киришүү

The Jesverty SPS-1362 is a compact and robust AC-to-DC switching power supply designed for various applications, including amateur radio and laboratory use. It provides a stable and precise output, with adjustable voltage from 9-15V and a switchable fixed 13.8V output, capable of delivering up to 60 Amperes. This manual will guide you through the proper installation, operation, and maintenance of your power supply.

Image: The Jesverty SPS-1362 power supply shown in a setup with various radio communication devices, demonstrating its wide range of applications.

2. Коопсуздук нускамалары

Please read all safety instructions carefully before operating the device. Failure to follow these instructions may result in electric shock, fire, or damage to the unit.

• Үй ичинде гана колдонуу: This power supply is designed for indoor use in dry environments. Do not expose it to rain, moisture, or high humidity.
• Туура желдетүү: Ensure adequate ventilation around the unit. Do not block ventilation openings. Maintain at least 10 cm (4 inches) of space around the power supply for proper airflow.
• Кубат булагы: Кубат булагын туура вольттогу AC розеткасына гана туташтырыңызtage and frequency as specified on the unit's label.
• Негиздөө: Ensure the power cord is properly grounded.
• Ашыкча жүктөөдөн качыңыз: Do not exceed the maximum output current (60A) or power (900W) of the unit.
• Кубатты өчүрүү: Always disconnect the power cord from the AC outlet before performing any maintenance or if the unit is not in use for an extended period.
• Колдонуучунун тейлөөчү тетиктери жок: Түзмөктү ачууга же оңдоого аракет кылбаңыз. Бардык тейлөө иштерин квалификациялуу тейлөө кызматкерлерине тапшырыңыз.
• Суюктук менен байланыш: Keep liquids away from the power supply. In case of accidental liquid spill, immediately disconnect power and have the unit inspected by a qualified technician.
• Температура: Operate the unit within the specified ambient temperature range.

3. Пакеттин мазмуну

Пакетте бардык буюмдар бар экенин текшериңиз:

• SPS-1362 Power Supply Unit
• AC Power Cord (type may vary by region)
• Test Leads (optional, may not be included with all units)

4. Продукт бүтүп калдыview

Familiarize yourself with the front and rear panels of the Jesverty SPS-1362 power supply.

4.1. Алдыңкы панель

Сүрөт: деталдуу view of the Jesverty SPS-1362 front and rear panels, showing all controls, displays, and connection points.

1. Санариптик дисплей: 3-digit LED display showing output voltage (V) же ток (A).
2. Тtage Adjust Knob: Used to fine-tune the output voltagжөнгө салынуучу режимде болгондо.
3. Noise Offset Knob: Adjusts noise compensation.
4. Кубат которгучу: ON/OFF switch for the unit.
5. 13.8V Fixed/Adjustable Voltage Которуу: Toggles between fixed 13.8V output and adjustable 9-15V output.
6. Cigarette Lighter Socket (Max 10A): For connecting devices with a cigarette lighter plug.
7. Output Terminals (Anderson PowerPole compatible): Main DC output terminals for high current applications. Red is positive (+), Black is negative (-).
8. USB-C порту: For charging or powering compatible USB-C devices.

4.2. Арткы панель

9. Муздатуу желдеткич: Intelligent cooling fan for thermal management.
10. AC киргизүү розеткасы: AC кубат шнурын туташтыруу үчүн.
11. Жер терминалы: For external grounding connection.
12. Сактандыргыч кутучасы: Contains the replaceable fuse for circuit protection.

Image: Left: Rear view highlighting the DC 13.8V output terminals (Max 60A). Right: Rear view showing the intelligent cooling fan for efficient heat dissipation.

5. Орнотуу

Follow these steps to set up your Jesverty SPS-1362 power supply:

1. Жайгашкан жери: Place the power supply on a stable, flat surface with adequate ventilation. Ensure no objects are blocking the air vents on the sides and rear of the unit.
2. AC кубат туташуу: Connect the provided AC power cord to the AC input socket on the rear panel of the power supply, then plug the other end into a suitable wall outlet.
3. Grounding (Optional but Recommended): For enhanced safety, connect a grounding wire from the ground terminal on the rear panel to a reliable earth ground.
4. Баштапкы күйгүзүү: Ensure the power switch on the front panel is in the "OFF" position. Then, turn on the power switch. The digital display should illuminate.

Image: The compact and robust casing of the Jesverty SPS-1362. Note that the AC power cord and mains input settings may vary depending on the destination from the factory.

6. Иштөө нускамалары

The Jesverty SPS-1362 offers both fixed and adjustable voltage output modes.

6.1. Fixed 13.8V Output Mode

1. Ensure the power supply is connected to AC power and turned ON.
2. Set the 13.8V Fixed/Adjustable Voltage Switch to the "13.8V" position.
3. The digital display will show "13.8V". The Voltage Adjust knob will be inactive in this mode.
4. Connect your device to the main output terminals (Anderson connectors) or the cigarette lighter socket. Ensure correct polarity (Red for positive, Black for negative).

6.2. Adjustable 9-15V Output Mode

1. Ensure the power supply is connected to AC power and turned ON.
2. Set the 13.8V Fixed/Adjustable Voltage Switch to the "ADJ" (Adjustable) position.
3. колдонуу Тtage Тууралоо баскычы каалаган чыгаруу көлөмүн орнотуу үчүнtage between 9V and 15V. Observe the digital display for the current voltage жөндөө.
4. Connect your device to the main output terminals (Anderson connectors) or the cigarette lighter socket. Ensure correct polarity.

Image: Left: Voltage adjustment knob and noise compensation control. Right: Cigarette lighter socket and output shift control.

6.3. Using the USB-C Port

The integrated USB-C port can be used to charge or power compatible devices. It operates independently of the main voltage output settings.

6.4. Noise Offset Adjustment

The Noise Offset Knob can be used to minimize interference or noise in sensitive applications, particularly useful for radio communication equipment. Adjust this knob slowly while monitoring your connected device for optimal performance.

Image: The Jesverty SPS-1362 providing power to a radio, illustrating a typical application.

Сүрөт: Мисamples of the Jesverty SPS-1362 power supply used in different radio communication environments.

7. Техникалык тейлөө

Туура техникалык тейлөө электр менен камсыздооңуздун узак мөөнөттүү жана ишенимдүү иштешин камсыз кылат.

• Тазалоо: Тазалоодон мурун электр кубатын розеткадан сууруп алыңыз. Сыртын сүртүү үчүн жумшак, кургак чүпүрөктү колдонуңуз. Суюк тазалоочу каражаттарды же эриткичтерди колдонбоңуз.
• Вентиляция: Regularly check that the ventilation openings are free from dust and debris. Use compressed air to gently clear any blockages if necessary.
• Сактагычты алмаштыруу: If the unit fails to power on, the fuse may need replacement. Disconnect the power cord, open the fuse box on the rear panel, and replace the fuse with one of the same type and rating.

8. Кыйынчылыктарды

If you encounter issues with your Jesverty SPS-1362, refer to the following common problems and solutions:

9. Техникалык шарттар

Detailed technical specifications for the Jesverty SPS-1362 power supply:

Image: Dimensions and weight of the Jesverty SPS-1362 power supply. The image indicates an approximate weight of 2.5 kg (5.51 lb). Suitable for amateur radio, CB radio, and scanner radio.

Image: Precise 3-digit LED display, showing voltage accurate to 0.1V and current accurate to 0.1A, alongside measurement equipment.

10. Кепилдик маалыматы

Jesverty products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase or contact Jesverty customer support for specific warranty terms and conditions.

Эскертүү: The warranty typically covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

11. Кардарларды колдоо кызматы

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Jesverty customer support.

• Webсайт: Visit the official Jesverty webКөп берилүүчү суроолор жана колдоо булактары үчүн сайт.
• Электрондук почта: Refer to your product packaging or the Jesverty webкардарларды тейлөө электрондук почта даректери үчүн сайт.
• Онлайн сатуучу: For purchase-related issues, you may also contact the retailer where you purchased the product.