Aninerel 3000W Hybrid Solar Inverter ANJ-3KW-LV-WIFI User Manual

1. Киришүү

This manual provides essential instructions for the installation, operation, and maintenance of your Aninerel 3000W Hybrid Solar Inverter, model ANJ-3KW-LV-WIFI. This device is designed to convert 24V DC power to 110V AC pure sine wave power, suitable for various off-grid and backup power applications. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.

Сүрөт 1.1: Алдыңкы view of the Aninerel 3000W Hybrid Solar Inverter. The inverter features a blue casing with the Aninerel logo and a central LCD display panel with control buttons.

2. Коопсуздук нускамалары

Электр шок, өрт же жаракат алуу коркунучун азайтуу үчүн ар дайым төмөнкү коопсуздук чараларын сактаңыз:

• Read all instructions and cautionary markings on the unit and in this manual before installation or operation.
• Do not disassemble the inverter. Refer servicing to qualified personnel. Incorrect reassembly may result in electric shock or fire.
• Электр тогуна урунуу коркунучун азайтуу үчүн, тейлөө же тазалоодон мурун бардык зымдарды ажыратыңыз.
• This inverter is designed for indoor or semi-outdoor use with an IP65 rating. Avoid direct exposure to rain or snow.
• Ашыкча ысып кетүүнүн алдын алуу үчүн инвертордун айланасында жакшы желдетүүнү камсыз кылыңыз. Желдетүүчү тешиктерди жаппаңыз.
• Орнотуу учурунда тиешелүү шаймандарды жана жеке коргонуу каражаттарын колдонуңуз.
• Ensure all wiring connections are tight and secure to prevent loose connections that can cause overheating.
• Do not connect the inverter to a public utility grid without proper authorization and safety measures.

3. Продукт бүтүп калдыview

The Aninerel 3000W Hybrid Solar Inverter integrates a pure sine wave inverter, an MPPT solar charge controller, and a battery charger into one compact unit. It is designed to provide uninterrupted power support.

3.1 Негизги өзгөчөлүктөрү

• 3000W Pure Sine Wave Output: Converts 24V DC to 110V AC, providing stable power for sensitive electronics.
• Integrated 100A MPPT Solar Charge Controller: Maximizes solar energy harvesting with up to 500VDC PV input.
• Flexible Charging and Output Modes: Offers multiple modes (Solar Only, AC Priority, Hybrid Charging; Mains Priority, PV Priority, Hybrid Output) for diverse power management.
• Батареянын кең шайкештиги: Supports AGM, GEL, Lead-acid, Li-ion, and LiFePO4 24V batteries.
• Smart LCD дисплей: Provides real-time monitoring and allows for easy configuration of system settings.
• Камтылган Wi-Fi: Enables remote monitoring of the inverter status (registration required).
• Күчтүү дизайн: IP65-rated enclosure for durability in various environments, with intelligent cooling.
• Комплекстүү коргоо: Overvol камтыйтtage, undervolvoltage, reverse polarity, and short circuit protection.

Сүрөт 3.1: Алдыңкы жана арткы панелдин үстүндөview. This diagram labels the LCD display, indicators, function buttons, RS485 communication port, grounding terminal, battery input, dry contact port, built-in Wi-Fi, AC input, AC output, PV input, and power on/off switch.

3.2 Алдыңкы панел жана көрсөткүчтөр

• LCD дисплей: Shows system status, operational data, and configuration settings.
• Заряддоо көрсөткүчү: Illuminates to indicate battery charging status.
• Статус көрсөткүчү: Provides general operational status of the inverter.
• Ката индикатору: Lights up to signal system errors or warnings.
• Функция баскычтары (ESC, өйдө, ылдый, ENTER): Used for navigating menus and adjusting settings on the LCD.

3.3 Арткы панелдин туташуулары

• RS485 байланыш порту: For external communication and monitoring.
• Жерге туташтыруу терминалы: Essential for safety grounding.
• Батарея киргизүү: Connects to the 24V battery bank.
• Кургак байланыш порту: Тышкы башкаруу же сигнал берүү үчүн.
• Built-in Wi-Fi Module: For wireless monitoring.
• AC киргизүү: Connects to grid utility or generator AC power.
• AC чыгаруу: Connects to household loads.
• PV киргизүү: Connects to solar panel arrays.
• Күйгүзүү/өчүрүү: Инвертордун негизги кубаттуулугун башкарат.

4. Орнотуу & Орнотуу

Proper installation is crucial for the safe and efficient operation of your hybrid solar inverter. Ensure all connections are made by a qualified electrician and adhere to local electrical codes.

4.1 Инверторду орнотуу

• Choose a suitable location that is dry, well-ventilated, and protected from direct sunlight and moisture.
• Аба агымынын жана муздатуунун туура болушу үчүн инвертордун айланасында жетиштүү боштук бар экенин текшериңиз.
• Инверторду тиешелүү бекиткичтерди колдонуп, бекем бетке тигинен орнотуңуз.

4.2 Зымдарды туташтыруу

Follow the wiring diagram carefully. All wiring should be performed with the inverter and all power sources disconnected.

Figure 4.1: Solar System Connection Diagram. This diagram illustrates the connections for solar panels, generator, utility grid, 24V battery, and household loads to the inverter. It shows the PV input, battery input, AC input, and AC output terminals.

4.2.1 Батареяны туташтыруу

• Connect the 24V battery bank to the battery input terminals on the inverter. Ensure correct polarity (+ to + and - to -).
• Use appropriate cable gauges for the battery connections to handle the expected current.
• The ANJ-3KW-LV-WIFI model supports a 24-volt DC system and is recommended for use with batteries of at least 100 ampere-hours capacity.

Figure 4.2: Inverter Battery Connection. This diagram shows wiring configurations for both 12-volt and 24-volt battery systems, emphasizing correct series/parallel connections for the desired voltage.

4.2.2 PV (Solar Panel) Connection

• Connect the solar panel array to the PV input terminals. Observe correct polarity.
• Ensure the total open circuit voltage of the PV array does not exceed 500VDC.
• The MPPT voltage range is 60-450VDC. Ensure your PV array voltage falls within this range for optimal charging.

4.2.3 AC киргизүү туташуу

• Connect the utility grid or generator AC power to the AC input terminals.
• The inverter supports 110/120VAC input with auto-sensing frequency (50/60Hz).

4.2.4 AC Output Connection

• Connect your household loads or appliances to the AC output terminals.
• The inverter provides 3000W continuous AC output at 110/120VAC.

4.3 Баштапкы кубаттуулук

• After all connections are secure, switch on the battery breaker first.
• Then, switch on the PV array breaker (if applicable).
• Finally, switch on the AC input breaker (if applicable) and the inverter's main power switch.
• Observe the LCD display for initial boot-up and status indicators.

5. Операция

The inverter offers various configurable settings to optimize power management based on your specific needs.

5.1 LCD дисплей жана жөндөөлөр

The LCD display provides real-time information and allows you to configure operational parameters using the function buttons.

• колдонуу UP жана ылдый баскычтар меню параметрлери боюнча чабыттоо.
• Басыңыз ENTER параметрди тандоо же орнотууну ырастоо үчүн.
• Басыңыз ESC to exit a menu or cancel an action.

5.2 Charging Priority Modes

These settings determine how the battery bank is charged from available power sources.

Figure 5.1: Charger Source Priority. This diagram illustrates three charging priority options: Solar First (solar panels charge first, AC input only if solar is unavailable), Solar and AC Input Simultaneously (both solar and utility charge at the same time), and Solar Only (solar energy is the exclusive charging source).

• Күн биринчи: Prioritizes solar power for charging. AC input will only charge the battery when solar power is insufficient or unavailable.
• AC Priority (Utility Priority): Prioritizes AC input (utility or generator) for charging. Solar power will supplement or take over if AC input is unavailable.
• Күн гана: The inverter will only charge the battery bank from solar power. AC input will not be used for charging.

5.3 Output Priority Modes

These settings determine the power source for your connected loads.

Figure 5.2: Output Source Priority. This diagram shows three output priority options: Solar First (power from solar first, AC input supplements if solar is insufficient), AC First (redirects AC input to power loads, uses solar/batteries when AC is unavailable), and DC Priority (prioritizes solar first, then battery, then AC input only when voltage drops to a programmable value).

• Solar First (PV Priority): Prioritizes solar power to supply loads. If solar power is insufficient, the battery bank will supplement, and then AC input will be used.
• AC First (Mains Priority): Prioritizes AC input (utility or generator) to power loads. If AC input is unavailable, the inverter will switch to battery power.
• DC Priority (Battery Priority): Prioritizes solar power first, then battery power. AC input will only engage when the battery voltage drops below a programmable threshold.

5.4 Wi-Fi Monitoring

The built-in Wi-Fi module allows for remote monitoring of your inverter's performance and status via a dedicated application. Registration may be required to access this feature.

Figure 5.3: Wi-Fi Monitoring. This image depicts a user monitoring the hybrid inverter's status wirelessly via a smartphone application, highlighting the convenience of the built-in Wi-Fi feature.

6. Техникалык тейлөө

Regular maintenance helps ensure the longevity and optimal performance of your Aninerel Hybrid Solar Inverter.

• Тазалоо: Мезгил-мезгили менен инвертордун сыртын кургак чүпүрөк менен тазалап туруңуз. Желдетүүчү тешиктердин чаң жана таштандыдан таза болушун камсыз кылыңыз.
• Байланыштары: Annually check all electrical connections (battery, PV, AC input/output) for tightness and corrosion. Tighten any loose connections.
• Курчап турган чөйрө: Ensure the installation environment remains within the specified temperature and humidity ranges.
• Микропрограмма: Өндүрүүчүнү текшериңиз webмайнаптуулугун жогорулатуу же жаңы функциялар үчүн бардык жеткиликтүү микропрограмма жаңыртуулары үчүн сайт.

7. Кыйынчылыктарды

Бул бөлүмдө сиз кабылышы мүмкүн болгон жалпы маселелерди чечүү жолдору каралган. Эгер көйгөй чечилбесе, кардарларды колдоо менен байланышыңыз.

8. Техникалык шарттар

Technical specifications for the Aninerel 3000W Hybrid Solar Inverter ANJ-3KW-LV-WIFI:

9. Кепилдик жана колдоо

For warranty information, please refer to the warranty card included with your product or visit the official Aninerel website. For technical support, troubleshooting assistance, or service inquiries, please contact Aninerel customer service through their official channels.

Manufacturer: Shenzhen Anenji Energy Technology Co.,Ltd