1. Киришүү
Thank you for choosing the AVAPOW A37/TJ18 Jump Starter. This device is designed to safely and efficiently jump-start vehicles with dead 12V batteries and serve as a portable power bank for electronic devices. Please read this manual thoroughly before use to ensure proper operation and to prevent damage to the product or your vehicle.
2. Коопсуздук маалыматы
WARNING: Improper use may result in injury or damage to the device or vehicle.
- Ар дайым кызыл cl туташтырыңызamp оң (+) терминалга жана кара clamp терс (-) терминалга.
- Кызыл жана кара кл тийбегилеamps together to avoid short circuits.
- Do not jump-start a vehicle if the jump starter's battery level is below 20%.
- Do not attempt to jump-start vehicles with voltag12Вдан башкалары.
- Аппаратты балдардан алыс кармаңыз.
- Аппаратты экстремалдык температурага, түз күндүн нуруна же сууга калтырбаңыз.
- If the jump starter becomes excessively hot during use, discontinue operation immediately.
- Колдонуу жана кубаттоо учурунда туура желдетүүнү камсыз кылыңыз.
3. Пакеттин мазмуну
Пакетиңизде бардык буюмдар бар экенин текшериңиз:
- AVAPOW Jump Starter Unit (A37 or TJ18)
- Smart Jumper Clamps
- USB-C заряддоо кабели
- Сактоочу куту
- Колдонуучунун Колдонмосу (бул документ)
Image 3.1: Contents of the AVAPOW Jump Starter package, including the main unit, smart jumper clamps, USB-C charging cable, and a protective storage case.
4. Продукт бүтүп калдыview
Familiarize yourself with the components and features of your AVAPOW Jump Starter.
Сүрөт 4.1: Каптал view illustrating the Force-Start Button, LED Light, EC5 Output Port, USB-C Input/Output (18W Max), USB-A Output, and DC Output.
Image 4.2: The 4-inch smart display provides real-time power monitoring. Indicators include 'IN' (Charging Detected), 'OUT' (Powering External Devices), 'READY' (Activation Start Indicator), 'Force Start Indicator', and 'Fault Detection Indicator'.
Негизги өзгөчөлүктөрү:
- Жогорку чоку агымы: Up to 4000A (A37) or 3000A (TJ18) for starting 12V vehicles.
- Dual Starter Modes: Normal Mode for low-voltage batteries and Force Start Mode for completely dead batteries.
- Өркүндөтүлгөн коопсуздук коргоосу: 10-layer safety features including short-circuit, reverse polarity, over-current, and over-temperature protection.
- 4 дюймдук санарип дисплей: Clear LED screen showing battery level, voltage, and operational alerts.
- Versatile Power Hub: USB-C PD 18W input/output, dual USB-A outputs, and a 12V DC output for charging various devices.
- Ultra-Bright Emergency Light: Features Steady, Strobe, and SOS modes for various situations.
5. Орнотуу
Алгачкы заряддоо:
Before first use, fully charge the AVAPOW Jump Starter. It is recommended to charge the device every 3-6 months to maintain optimal battery health.
- Connect the provided USB-C charging cable to the USB-C input/output port on the jump starter.
- Connect the other end of the USB-C cable to a USB wall adapter (not included) or a car charger. For fastest charging, use a PD 18W compatible charger.
- The digital display will show 'IN' and the battery level will increase, indicating charging is in progress.
- Charging is complete when the display shows 100%. A full charge typically takes approximately 2.5 hours with an 18W PD charger.
6. Иштөө нускамалары
6.1. Унааны баштоо
Унааны от алдырууга аракет кылуудан мурун, стартердин кеминде 20% заряддалганын текшериңиз.
- Connect Clamps: Plug the smart jumper clamps into the EC5 output port of the jump starter. Ensure a secure connection.
- Батареяга туташтыруу: Кызыл (+) cl туташтырыңызamp to the positive terminal of the vehicle's battery. Connect the black (-) clamp унаанын аккумуляторунун терс терминалына.
- Дисплейди текшерүү: The jump starter's display should show 'READY' if the connection is correct and the battery voltage is detected. If a fault is detected, the 'Fault Detection Indicator' will illuminate.
- Унаа баштоо: Start your vehicle's engine. If the vehicle does not start immediately, wait 30 seconds before trying again. Do not crank the engine for more than 3 seconds per attempt.
- Clamps: Once the vehicle starts, immediately remove the smart clamps from the vehicle battery, then disconnect them from the jump starter.
Image 6.1: The AVAPOW Jump Starter connected to a vehicle battery using the smart clamps, ready to initiate a jump start.
Force Start Mode:
If your vehicle's battery is completely dead (0V) and the jump starter does not display 'READY', you may need to use Force Start Mode.
- Акылдуу cl туташтырыңызamps to the jump starter and then to the vehicle battery terminals as described above.
- Press and hold the 'Force-Start Button' on the jump starter for 3 seconds. The 'Force Start Indicator' will illuminate.
- Start your vehicle's engine within 30 seconds.
- Once the vehicle starts, immediately remove the smart clamps.
CAUTION: Use Force Start Mode only when necessary, as it bypasses some safety checks. Ensure correct polarity before activating.
6.2. Көчмө кубат банкы катары колдонуу
The AVAPOW Jump Starter can charge various electronic devices.
- USB-C чыгышы: Connect your device to the USB-C port using a compatible cable for fast charging up to 18W.
- USB-A чыгаруу: Connect your device to either of the USB-A ports for standard charging (e.g., 5V/3A, 9V/2A, 12V/1.5A).
- 12V DC чыгышы: Use the 12V DC output port to power 12V accessories (e.g., tire inflators, car vacuums).
6.3. Авариялык LED жарыгын колдонуу
The built-in LED light offers three modes for various emergency situations.
Image 6.2: The AVAPOW Jump Starter's ultra-bright LED light, capable of Steady, Strobe, and SOS modes for emergency illumination.
- Press the LED light button once for Steady mode.
- Press again for Strobe mode.
- SOS режимине өтүү үчүн үчүнчү жолу басыңыз.
- Жарыкты өчүрүү үчүн төртүнчү жолу басыңыз.
7. Техникалык тейлөө
- Заряддоо: Recharge the jump starter at least once every 3-6 months to prolong battery life, even if not in use.
- Сактагыч: Store the device in a cool, dry place, away from direct sunlight and moisture. The recommended storage temperature is between -4°F to 140°F (-20°C to 60°C).
- Тазалоо: Use a soft, dry cloth to clean the exterior of the device. Do not use harsh chemicals or abrasive materials.
- Батареяга кам көрүү: Do not disassemble the unit. The internal battery is not user-replaceable.
8. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Унаа башталбайт. | Jump starter battery too low; clamps not connected properly; vehicle battery completely dead. | Ensure jump starter is sufficiently charged (>20%). Check clamp connections. Try Force Start Mode if battery is completely dead. |
| Jump starter display shows 'Fault'. | Тескери полярдуулуктагы туташуу; кыска туташуу; ашыкча температура. | Ажыратуу clampжана туура полярдуулук менен кайра туташтырыңыз.amps are not touching. Allow device to cool down if hot. |
| Стартер заряддалбай жатат. | Charging cable or adapter faulty; port obstruction. | Try a different USB-C cable and wall adapter. Ensure the USB-C port is clean and free of debris. |
| External devices not charging. | Секирүү стартер батареясы өтө аз; туура эмес кабель; шайкеш келбейт. | Charge the jump starter. Use the correct charging cable for your device. Verify device compatibility with output specifications. |
9. Техникалык шарттар
- Модел: A37, TJ18
- Жогорку ток: Up to 4000A (A37), 3000A (TJ18)
- Start Voltage: 12V
- Мотор шайкештиги: 8.0 литрге чейин бензин / 8.0 литрге чейин дизелдик кыймылдаткычтар
- USB-C Киргизүү/Чыгуу: PD 18W Макс
- USB-A чыгаруу 1: 5V/3A, 9V/2A, 12V/1.5A
- USB-A чыгаруу 2: 5V/2.4A
- DC чыгаруу: 12V/10A
- Иштөө температурасы: -4°F – 140°F (-20°C – 60°C)
- Заряддоо убактысы: Approximately 2.5 hours (with 18W PD charger)
- Коопсуздук сертификаттары: UL/FC/CE certified
10. Кепилдик жана колдоо
AVAPOW products are designed for reliability and performance. For warranty information, technical support, or any questions regarding your AVAPOW Jump Starter, please refer to the warranty card included in your package or visit the official AVAPOW website. Please have your model number (A37 or TJ18) and purchase information ready when contacting support.