1. Introduction and Overview
The GREENCUT BAS370C submersible water pump is engineered for efficient and stable water extraction from deep wells, tanks, and for domestic irrigation systems. This robust pump is designed for clean water applications, offering reliable performance and ease of installation.
Негизги өзгөчөлүктөрү:
- Күчтүү аткаруу: 370W (0.5 HP) motor with a maximum flow rate of 20 L/min and a pumping height of up to 50m.
- Туруктуу курулуш: Features a screw-type impeller and IP58 protection, ensuring resistance to continuous underwater operation.
- Оңой орнотуу: Includes a 10m cable for straightforward setup in deep wells.
- Компакт жана тынч: Designed for minimal noise and easy maintenance, suitable for clean water with particles ≤ 0.2 mm and temperatures up to 35°C.
2. Коопсуздук нускамалары
Always prioritize safety when operating electrical equipment near water.
- Электр коопсуздугу: Ensure the power supply matches the pump's requirements (220V). All electrical connections must be secure and waterproof. Use a residual current device (RCD) for added protection.
- Эч качан кургабаңыз: Operating the pump without water will cause severe damage. Ensure the pump is fully submerged before starting.
- Суунун сапаты: This pump is designed for clean water with small particles (≤ 0.2 mm) and a maximum temperature of 35°C. Do not use with dirty water, corrosive liquids, or flammable substances.
- Орнотуу: Securely attach all hoses and cables. Use a strong rope or stainless steel cable to lower and retrieve the pump, ensuring it does not rely solely on the electrical cable.
- Кайтарып бербеген клапан: It is highly recommended to install an external non-return valve to prevent water backflow and maintain pressure in the system. The internal non-return valve may not be sufficient for all applications.
- Сактагыч: Before storing, completely drain the pump of water, especially in freezing conditions. Store in a dry, protected area.
- Тейлөө: Техникалык тейлөө же тазалоо иштерин жүргүзүүдөн мурун электр кубатынан ажыратыңыз.
3. Продукциянын өзгөчөлүктөрү
The GREENCUT BAS370C pump is built with high-quality materials and thoughtful design for optimal performance.
3.1 Robust and Durable Design
Constructed from stainless steel, the pump is highly resistant to corrosion and wear, ensuring a long operational life even under continuous submersion.
3.2 Efficient Motor and Hydraulic System
Equipped with a 370W (0.5 HP) motor and a screw-type impeller, the pump delivers stable and efficient performance. Its hydraulic configuration allows it to pump up to 20 liters per minute and achieve a maximum pumping height of 50 meters.
3.3 Integrated Electrical Control Box
The pump includes an electrical control box for safe and convenient operation. This box often contains the necessary capacitor for single-phase power conversion, as noted by users.
3.4 Versatile Installation
The pump can be installed and operated in both vertical and horizontal positions, provided it is fully submerged. Top handles facilitate easy insertion and handling in wells.
4. Техникалык шарттар
| Спецификация | Нарк |
|---|---|
| Өндүрүүчү | Жашыл түс |
| Модель номери | 1000232 |
| Өлчөмдөрү (L x W x Y) | 9 x 9 x 56 см |
| Салмагы | 9.5 кг |
| Күч | 370 Вт (0.5 HP) |
| Тtage | 220V |
| Максималдуу агым ылдамдыгы | Мүнөтүнө 20 литр |
| Max Lift бийиктиги | 50 метр |
| Материал | Дат баспаган болот |
| Power Source | Электр кабели |
| Кабелдин узундугу | 10 метр |
| Коргоо рейтинги | IP58 |
| Max Max Суунун температурасы | 35°C |
| Макс бөлүкчөлөрдүн өлчөмү | ≤ 0.2 мм |
| Камтылган компоненттер | 1x BAS370C Submersible Water Pump, 1x 10-meter Cable, 1x Electrical Control Box, 1x Instruction Manual |
5. Орнотуу жана орнотуу
Follow these steps for proper installation of your GREENCUT BAS370C submersible pump:
- Насосту даярдоо: Ensure the pump is clean and free from any debris.
- Connect the Discharge Hose: Attach a suitable discharge hose to the pump's outlet. Secure the connection with a hose clamp агып кетпеши үчүн.
- Install Non-Return Valve: For optimal performance and to prevent water backflow, install a non-return valve in the discharge line, preferably above the pump.
- Насосту бекитиңиз: Attach a strong, non-corrosive rope or stainless steel cable to the pump's designated attachment points. This will be used to lower and retrieve the pump. Do not use the electrical cable for this purpose.
- Насосту түшүрүү: Carefully lower the pump into the well or water source, ensuring it is fully submerged. The pump can operate vertically or horizontally.
- Электр байланышы: Connect the pump's electrical cable to the provided electrical control box. Ensure all connections within the control box are correctly wired (main input, secondary input, ground) according to the wiring diagram in the manual. The control box typically contains a capacitor for single-phase operation.
- Электр камсыздоо: Connect the control box to a suitable 220V power supply, ensuring it is protected by an RCD.
5.1 Installation Video Example
Watch this video for a visual guide on installing a deep well submersible pump (note: specific model may vary, but principles apply):
6. Иштөө нускамалары
Operating the GREENCUT BAS370C is straightforward once properly installed.
- Сууга түшүүнү камсыз кылуу: Verify that the pump is completely submerged in clean water before activating.
- Күчтү иштетүү: Turn on the power supply to the electrical control box. The pump should start automatically.
- Монитор аткаруу: Observe the water flow and pressure. The pump is designed to provide consistent performance.
- Automatic Operation (if applicable): If your system includes an automatic pressure switch, the pump will start and stop automatically based on water demand (e.g., opening or closing a tap).
- Өчүрүү: To stop the pump, turn off the power supply at the control box.
6.1 Operation Video Examples
These videos demonstrate the operation of similar deep well submersible pumps:
7. Техникалык тейлөө
Regular maintenance ensures the longevity and optimal performance of your GREENCUT BAS370C pump.
- Тазалоо: Periodically inspect the pump's intake for blockages from sediment or debris. Clean as necessary.
- Кыштоо: In areas prone to freezing temperatures, remove the pump from the water source, drain it completely, and store it in a dry, frost-free location.
- Cable and Hose Inspection: Regularly check the electrical cable and discharge hose for any signs of wear, damage, or leaks. Replace damaged components immediately.
- Non-Return Valve Check: If an external non-return valve is installed, periodically check its function to ensure it is preventing backflow effectively.
8. Кыйынчылыктарды
Насосуңузда көйгөйлөргө туш болсоңуз, төмөнкү жалпы көйгөйлөрдү жана чечимдерди караңыз:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Насос иштебейт | No power supply; Faulty electrical connection; Motor overload. | Check power outlet and circuit breaker. Inspect all electrical connections in the control box. Allow motor to cool if overloaded. |
| Төмөн суунун агымы же басымы | Partial blockage in intake or discharge hose; Insufficient water level; Faulty non-return valve; Air in the system. | Check and clear any blockages. Ensure pump is fully submerged. Inspect and replace non-return valve if necessary. Bleed air from the system. |
| Насос иштеп жатат, бирок суу берилбейт | Pump not submerged; Airlock; Suction hose leak; Impeller damage. | Ensure full submersion. Prime the pump if necessary. Check hose connections for leaks. Contact service if impeller is suspected to be damaged. |
| Насос күтүлбөгөн жерден токтойт | Overheating; Low water level; Electrical fault. | Allow pump to cool. Ensure adequate water level. Check electrical connections and RCD. |
9. Кепилдик жана колдоо
For any warranty claims, technical assistance, or spare parts, please contact Greencut customer service or visit their official webсайт.
Greencut Service & Support: www.greencut-tools.com
Сураныч, кепилдик максаттары үчүн сатып алганыңыздын далилин сактап коюңуз.