IMAYCC 100CC 2-Stroke Gas Bicycle Engine Conversion Kit Instruction Manual

1. Киришүү

This manual provides detailed instructions for the installation, operation, and maintenance of your IMAYCC 100CC 2-Stroke Gas Bicycle Engine Conversion Kit. This kit is designed to convert compatible 26-28 inch wheeled bicycles into motorized bikes. Please read this manual thoroughly before beginning installation or operation to ensure safe and correct usage.

Image: An assembled bicycle with the IMAYCC 100CC engine kit installed, showcasing the complete motorized bike.

2. Коопсуздук маалыматы

Operating a motorized bicycle carries inherent risks. Adhere to all safety precautions to prevent injury or damage.

• Кесиптик орнотуу сунушталат: If you lack basic hardware skills or experience with engine kits, seek professional assistance.
• Коопсуздук шаймандарын кийүү: Always wear a helmet, eye protection, gloves, and appropriate clothing when operating the motorized bicycle.
• Күйүүчү май иштетүү: Gasoline is highly flammable. Handle fuel in a well-ventilated area, away from open flames or sparks. Store fuel in approved containers.
• Мотордун кириши: Follow the recommended fuel mixing ratio for the engine break-in period (20:1 after 500km) to ensure longevity.
• Үзгүлтүксүз текшерүүлөр: Before each ride, check all fasteners, cables, and components for tightness and proper function.
• Жергиликтүү эрежелер: Be aware of and comply with all local laws and regulations regarding motorized bicycles in your area.

3. Пакеттин мазмуну

Төмөндө тизмеленген бардык компоненттер комплектиңизге киргизилгендигин текшериңиз:

Image: A comprehensive layout of all parts included in the IMAYCC 100CC Bicycle Engine Kit.

• Engine (1)
• Fuel Tank (1)
• Carburetor (1)
• Sprocket (1) - 44 teeth
• Chain (1) - 110 knots
• Chain Cover (1)
• Муфта рычагы (1)
• Tensioner (1)
• Rubber Pad Cleats (2)
• Spark Plug (1)
• Fuel Filter (1)
• Round Rubber Pads (2)
• Clutch Lever Sleeve (1)
• Throttle Handle (1)
• Шамдын ачкычы (1)
• CDI Ignition (1)
• 6mm Drill Bit (1)
• Exhaust Manifold Mounting Piece (1)
• Chain Remover (1)
• Kill Switch (1)
• Throttle Cable (1)
• Clutch Cable (1)
• Exhaust Pipe (1)
• Bolts (with Spring Washers and Nuts) (9)
• 3.5mm Multi-Purpose Fish Head Wrenches (2)
• Exhaust Manifold Mounting Screws & Nuts (3)
• 5mm Hardened L-Type Allen Wrench (1)
• 1/4 Short Set of 10mm Internal and External Hexagon Sockets (1)
• Fuel Line Clampс (5)
• Fuel Line (1)
• Small Spring (1)
• Large Spring (1)
• Fuel Tank Switch (1)
• Gear Removal Tool (1)

4. Орнотуу боюнча колдонмо

The installation process requires basic hardware skills and tools. Refer to the video below for a visual guide. It is recommended to watch the entire video before starting the installation.

4.1. Шайкештикти текшерүү

This kit is suitable for most 26-28 inch wheeled bikes (mountain bikes, cruisers, motorcycles, road bikes) with V-frames. Ensure there is at least 10 inches of clearance between the bottom bracket and the top bar of the frame, especially for 26-inch bikes.

Image: A diagram illustrating the required clearance and dimensions for installing the engine kit on a bicycle frame.

4.2. Кадам-кадам орнотуу

1. Step 1: Install the Sprocket (Video: 0:20 - 1:29)
   Remove the rear wheel. Disassemble the existing sprocket if necessary. Cut the rubber pads to fit the spokes. Place the rubber pads, sprocket, and mounting plates onto the wheel hub. Secure them with bolts and nuts, ensuring the sprocket is centered and tight. Reinstall the rear wheel.
2. Step 2: Installation of Engine and Carburetor (Video: 1:30 - 3:27)
   Install the spark plug into the engine cylinder head. Assemble the carburetor by inserting the throttle needle and spring into the throttle slide, then attach the throttle cable. Mount the carburetor onto the engine intake manifold. Position the engine within the bicycle frame's V-frame. Secure the engine using the provided mounting plates, bolts, and nuts. Ensure the engine is level and does not interfere with pedals or other bike components.
3. Step 3: Installation of Chain (Video: 3:28 - 6:06)
   Install the chain tensioner onto the bicycle frame. Route the drive chain from the engine sprocket to the rear wheel sprocket, passing through the chain tensioner. Adjust the chain length by marking and removing excess links using the chain breaker tool. Connect the chain ends with the master link. Adjust the chain tensioner to ensure proper chain tension.
4. Step 4: Installation of The Throttle Handle (Video: 6:07 - 6:59)
   Disassemble the throttle handle housing. Insert the throttle cable into the throttle mechanism. Mount the throttle handle onto the right handlebar. Secure the throttle handle housing with screws. Ensure the throttle operates smoothly and returns to the idle position when released.
5. Step 5: Installation of Clutch Lever and Clutch Cable (Video: 7:00 - 7:39)
   Attach the clutch cable to the clutch lever. Mount the clutch lever onto the left handlebar. Route the clutch cable to the engine's clutch arm. Connect the clutch cable to the clutch arm, ensuring proper tension for smooth clutch engagement and disengagement.
6. Step 6: Installing The Ignition (Video: 7:40 - 8:18)
   Mount the CDI ignition unit to a suitable location on the bicycle frame, typically using zip ties or clamps. Connect the ignition wires: blue to blue, black to black. The white wire from the magnetic coil does not need to be connected; insulate it with electrical tape. Connect the spark plug cap to the spark plug.

   Image: A diagram illustrating the correct wiring connections for the CDI ignition unit and kill switch.
7. Step 7: Installation of Fuel Tank, Exhaust, and Chain Cover (Video: 8:19 - 1:18:00)
   Install the fuel tank onto the top tube of the bicycle frame using the provided mounting hardware. Attach the fuel valve and fuel filter to the fuel tank. Connect the fuel line from the fuel filter to the carburetor. Install the exhaust pipe onto the engine cylinder, securing it with bolts. Attach the chain cover to protect the drive chain, ensuring it does not interfere with moving parts.

   Image: A visual guide detailing the steps for installing the fuel tank, including the fuel valve and filter connections.

5. Иштөө нускамалары

5.1. Fuel Mixing

This is a 2-stroke engine and requires a specific gasoline-to-engine oil mixture. Use 90# gasoline.

• New Equipment: 16:1 (Fuel:Engine Oil)
• After Run-in Period (after 500km): 20:1 (Fuel:Engine Oil)

Mix thoroughly before adding to the fuel tank. Always close the fuel valve when parking the bicycle.

5.2. Моторду ишке киргизүү

1. Күйүүчү май клапанын ачыңыз.
2. Engage the choke (if cold starting).
3. Муфтаны ажыратыңыз.
4. Pedal the bicycle to gain some speed (approx. 5-10 mph).
5. Slowly release the clutch lever. The engine should engage and start.
6. Мотор ишке киргенден кийин, .Муунткучту акырындык менен өчүрүңүз.

5.3. Riding

• Control speed using the throttle handle.
• Use the clutch for smooth starts and stops.
• Maintain a speed of 35-40 km/h for optimal fuel consumption (2.5L per 100km). Maximum speed limit is 50 km/h.

5.4. Моторду токтотуу

• Муфтаны иштетиңиз.
• Press the kill switch to turn off the engine.
• Close the fuel valve when the engine is off or the bike is parked.

6. Техникалык тейлөө

• Күйүүчү май системасы: Regularly check the fuel filter for debris and replace if necessary. Inspect fuel lines for cracks or leaks.
• Свеча: Inspect the spark plug periodically for wear and carbon buildup. Clean or replace as needed.
• чынжыр: Keep the drive chain clean and lubricated. Adjust tension as required to prevent slippage or excessive wear.
• бекиткичтер: Бардык гайкаларды, болтторду жана бекиткичтерди мезгил-мезгили менен текшерип туруңузamps for tightness, especially after the initial break-in period. Vibrations can loosen components.
• Аба чыпкасы: Clean or replace the carburetor's air filter regularly to ensure proper air intake and engine performance.

7. Кыйынчылыктарды

8. Техникалык шарттар

9. Кепилдик жана колдоо

IMAYCC is committed to providing high-quality products and services. If there is any quality problem with your purchased product, IMAYCC offers one year of long-term guidance or free replacement of brand new products.

For product support, please visit the 'Contact Seller' option in your Amazon order details. We are here to assist you.