1. Киришүү
Thank you for choosing the hygger Programmable LED Aquarium Light, Model HG160. This light is designed to provide a full spectrum lighting solution for planted aquariums, featuring a 24/7 sunrise and sunset cycle, adjustable colors, and brightness levels. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and longevity of your aquarium light.
2. Коопсуздук нускамалары
- Always unplug the light from the power outlet before performing any maintenance, cleaning, or installation.
- This product is designed for indoor use only. Do not expose to rain or extreme moisture.
- Ensure your hands are dry when handling the power adapter and controller.
- Do not operate the light if any part is damaged, especially the power cord or adapter.
- Балдар жетпеген жерде сактаңыз.
- Сууга кокусунан түшүп кетпеши үчүн, жарык аквариумга бекем орнотулганын текшериңиз.
- The light unit is IP68 waterproof, but the controller and power adapter are not. Keep them away from water.
3. Пакеттин мазмуну
Пакетте бардык буюмдар бар экенин текшериңиз:
- LED Aquarium Light Unit
- Тышкы контролер
- Extendable Brackets (pre-attached or separate)
- Power Adapter (100-240V AC to 24V/2A DC)
- Колдонуучунун Колдонмосу (бул документ)
4. Орнотуу жана орнотуу
Follow these steps to install your hygger LED Aquarium Light:
- Компоненттерди таңгактан чыгаруу: Таңгактан кылдаттык менен бардык нерселерди алып салыңыз.
- Кашаларды тиркөө: If the extendable brackets are not pre-attached, slide them onto the ends of the light unit.
- Позиция жарыгы: Place the light unit on top of your aquarium. Adjust the extendable brackets to fit your tank size (e.g., 29-35 inches for the L size model) securely. Ensure the light is centered and stable.
Image: hygger LED Aquarium Light mounted on an aquarium.
Image: Close-up of the adjustable extendable brackets.
- Контроллерди туташтыруу: Plug the light unit's cable into the designated port on the external controller.
- Туташуу кубаты: Plug the power adapter into the controller, then plug the adapter into a standard electrical outlet.
5. Иштөө нускамалары
5.1 Controller Overview
The external controller features an LCD display and several buttons for programming and adjusting the light settings. Familiarize yourself with the button functions:
Image: Detailed diagram of the controller and its functions.
- СААТ/МҮНӨТ: Adjusts time values.
- ЖӨНДӨӨ: Enters settings, confirms selections, or switches between hours/minutes.
- ӨҢҮ: Cycles through 8 available colors in DIY mode.
- ЖАРЫКТЫК: Adjusts 10 levels of brightness.
- ӨЙДӨ/ТӨМӨН жебелери: Adjusts values (time, brightness, color).
- КҮЙГҮЗҮҮ/ӨЧҮРҮҮ: Short press to turn on, long press (3 seconds) to turn off.
- 24/7: Activates the 24/7 automatic daylight cycle.
- КҮН: Activates Sunlight constant mode. Long press (3 seconds) to set the daylight timer.
- ТҮН: Activates Moonlight constant mode. Long press (3 seconds) to set the moonlight timer.
- DAY+NIGHT: Switches between daylight mode and moonlight mode. Long press (3 seconds) to set the day/night mode timer.
- DIY/OK: Enters DIY mode, confirms end time of each segment.
5.2 Setting Local Time
Before using timed modes, set the current local time on the controller. Refer to the video below for a visual guide on operating the light, which includes time setting.
Video: Instructions on how to operate the hygger HG160 smart aquarium light, including initial setup and time setting.
5.3 24/7 Default Mode
This mode simulates a natural 24-hour sunrise and sunset pattern, providing a stable lighting environment for your aquarium. It turns on at 6:00 AM and off at 11:00 PM with smooth transitions.
- Ensure the local time is set correctly.
- баскычын кыскача басыңыз 24/7 button to activate this mode.
Image: Light intensity graph for the 24/7 mode, illustrating sunrise, daylight, dusk, and moonlight phases.
Video: Demonstrates the hygger IP68 Waterproof LED Aquarium Light with Timer, showing its operation.
Video: Shows the Day and Nightlight functionality of the aquarium light.
Video: Demonstrates the Nightlight Mode of the LED Aquarium Light.
Video: Demonstrates the Daylight Mode of the LED Aquarium Light.
5.4 "Өзүң жаса" режими
The DIY mode allows you to customize the timing, color, and brightness for up to 5 distinct stages (L1-L5) throughout the day, tailoring the lighting to your specific aquatic ecosystem needs.
- басыңыз DIY/OK button to enter DIY mode.
- For each segment (L1-L5) in sequence:
- Басыңыз ЖОГОРУ/ТӨМӨН arrows to set the start time. Press SET to switch between hours/minutes. Press SET ырастоо үчүн.
- баскычын кыскача басыңыз ӨҢҮ button to select a color. Press SET ырастоо үчүн.
- баскычын кыскача басыңыз ЖАРЫКТЫК button to adjust brightness levels (10%-100%). Press SET ырастоо үчүн.
- Кыскача басыңыз ЖОГОРУ/ТӨМӨН arrows to set the end time for the current segment.
- Басыңыз DIY/OK to proceed to the next segment.
- Repeat for all 5 segments.
Image: Illustration of the DIY 5 Stages Mode, demonstrating customizable light phases.
Video: Demonstrates the DIY Mode of the LED Aquarium Light, showing customization options.
5.5 Manual Modes (Day, Night, Daylight & Moonlight)
These modes allow for constant lighting at specific settings:
- Күн режими: баскычын кыскача басыңыз КҮН button for constant sunlight. Long press (3 seconds) to set a specific timer for this mode.
- Түнкү режим: баскычын кыскача басыңыз ТҮН button for constant moonlight. Long press (3 seconds) to set a specific timer for this mode.
- Daylight & Moonlight Mode: баскычын кыскача басыңыз DAY+NIGHT button to switch between daylight and moonlight. Long press (3 seconds) to set a specific timer for this combined mode.
Image: Comparison of Day Mode and Night Mode settings with the controller.
Image: Controller displaying Daylight & Moonlight Mode.
5.6 Түсү жана жарыктыгын жөндөө
In DIY or manual modes, you can adjust the light's appearance:
- Түстөр: Choose from 8 colors: White, Blue, Red, Green, Yellow, Azure, Orange, Purple. Use the ӨҢҮ параметрлерди карап чыгуу үчүн баскычты басыңыз.
- Жарыктык: Adjust between 10 brightness levels (10% to 100%). Use the ЖАРЫКТЫК баскычы же ЖОГОРУ/ТӨМӨН жебелер.
Image: Visual representation of the 8 color options and 10 brightness levels.
5.7 Smart Memory Function
The light features intelligent power recovery. In case of a power outage, all settings are restored. However, the local time may need to be reset. The 24/7 cycle will seamlessly resume if no adjustments are made within 5 minutes of reboot.
Image: Illustration of the Smart Memory Function, showing light states before and after a power interruption.
6. Техникалык тейлөө
Аквариум чырагынын үзгүлтүксүз техникалык тейлөөсү анын узак мөөнөттүү иштешин жана оптималдуу иштешин камсыз кылат.
- Тазалоо: Unplug the light before cleaning. Wipe the aluminum alloy shell with a soft, damp cloth. Do not use abrasive cleaners or immerse the controller or power adapter in water.
- Жылуулук таркатылышы: The light features a fin-like texture for efficient heat dissipation. Ensure these fins are not obstructed to maintain proper cooling.
- Кабелдик текшерүү: Periodically check the power cord and connections for any signs of wear or damage.
Image: Close-up of the aluminum alloy housing with fin-type design for heat dissipation.
Видео: Бүттүview of the IP68 Waterproof Full Spectrum Aquarium Plant Light, highlighting its features and design.
7. Кыйынчылыктарды
If you encounter issues with your hygger LED Aquarium Light, refer to the following common problems and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Жарык күйбөйт. | No power, loose connection, damaged adapter. | Check power outlet. Ensure all connections are secure. Inspect power adapter for damage; replace if necessary. |
| Controller screen is blank or malfunctioning. | Электр энергиясында көйгөй, ички ката. | Unplug and replug the power. If issue persists, contact customer support. |
| Specific colors are not working. | LED fault, wiring issue. | Ensure the light is not in a mode that restricts color. If problem persists, contact customer support. |
| 24/7 mode not starting or ending correctly. | Incorrect local time setting. | Verify and reset the local time on the controller. |
If troubleshooting steps do not resolve the issue, please contact hygger customer support for assistance.
8. Техникалык шарттар
Key technical specifications for the hygger Programmable LED Aquarium Light (Model HG160):
| Өзгөчөлүк | Деталь |
|---|---|
| Модель номери | HG160 |
| Ватtage | 38 ватт |
| LED саны | 150 (94 white, 6 red, 14 blue, 6 green, 30 RGB) |
| Lumens | 1398 лм |
| Түс температурасы | 12781K |
| CRI (түстүү көрсөтүү индекси) | >90 |
| Продукциянын өлчөмдөрү | 28.5"D x 4.3"W x 0.5"H (72.5 cm length) |
| Колдонула турган танктын өлчөмү | 29-35 дюйм (75-90 см) |
| Power Source | Corded Electric (100-240V AC to 24V/2A DC adapter) |
| Материал | Алюминий эритмеси |
| Суу өткөрбөйт рейтинги | IP68 (light unit only) |
| Өмүр | 50,000 саат |
Image: Comprehensive product specifications table for different light sizes.
Image: Details on the 38W full spectrum and high rendering index (CRI >90).
9. Кепилдик жана колдоо
This hygger LED Aquarium Light comes with a 2 жылдык өндүрүүчүнүн кепилдиги. Бул кепилдик нормалдуу колдонуудагы материалдардагы жана жасалгадагы кемчиликтерди камтыйт.
For warranty claims, technical support, or any questions regarding your product, please contact hygger customer service:
- Webсайт: www.hygger-online.com (Сураныч, расмий текшерүү webакыркы байланыш маалыматы үчүн сайт.)
- Электрондук почта: Өнүмүңүздүн таңгагына же расмий маалыматына кайрылыңыз webколдоо электрондук почта үчүн сайт.
Please have your model number (HG160) and proof of purchase ready when contacting support.