Daakro XY-T1002P 2 Channel Bluetooth Ampliifier Board Instruction Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the Daakro XY-T1002P 2 Channel Bluetooth Amplifier Board. Please read this manual thoroughly before using the product to ensure proper function and safety.

Image: The Daakro XY-T1002P amplifier board connected to two speakers, demonstrating its 2.0 channel audio output capability.

Коопсуздук маалыматы

Observe the following safety precautions to prevent electric shock, fire, or damage to the device:

• электр менен жабдууну камсыз кылуу voltage 12-30V DC белгиленген диапазондо.
• Аппаратты нымдуулукка же экстремалдык температурага дуушар кылбаңыз.
• Чыгуу терминалдарын кыска туташуудан сактаңыз.
• Бөлүп же өзгөртпөңүз ampкуткаруучу такта.
• Балдар жетпеген жерде сактаңыз.
• Кандайдыр бир туташтырууларды же жөндөөлөрдү жасоодон мурун электр кубатынан ажыратыңыз.

Продукт бүттүview

The Daakro XY-T1002P is a 2-channel Bluetooth amplifier board designed for DIY audio projects, offering 100W+100W peak power output. It features a TPA3221 HiFi chip for high-fidelity sound and supports multiple audio input options.

Сүрөт: деталдуу view -ныкы ampкөтөргүч такта, көрсөтүүasing its premium-grade components such as high-capacity capacitors, digital amplifier-specific inductors, solid-state capacitors, Bluetooth chip, TI NE5532 chips, and large heat sinks.

Негизги өзгөчөлүктөрү:

• Dual TPA3221 HiFi Chip: Provides ultra-high resolution and low distortion audio.
• 2.0 каналдык чыгаруу: 100W + 100W power output.
• Бир нече аудио киргизүүлөр: Bluetooth 5.2, AUX (3.5mm), USB Flash Drive, USB Sound Card.
• Multi-Function Master Volume Knob: Controls volume, play/pause, track skipping, and mode switching.
• Индикатор жарыктары: Green for USB, Red for AUX, Blue for Bluetooth mode.
• Treble and Bass Adjustment: Independent knobs for sound customization.

Сүрөт: бурчтуу view -ныкы amplifier board, showing the layout of the control knobs and input/output terminals.

Орнотуу нускамалары

Follow these steps to correctly set up your Daakro XY-T1002P ampкуткаруучу такта.

Image: A detailed diagram illustrating the various connection points on the amplifier board, including power input, speaker outputs, 3.5mm audio input, USB input, and the multi-function knob.

1. Кубат туташуу:

• Connect a DC power supply (12-30V) to the "POWER DC 12-30V" input terminals. Ensure correct polarity (+ and -).
• Alternatively, use a 5.5-2.5mm DC jack if your power supply has one.
• Маанилүү: Ensure the power switch is in the "OFF" position before connecting power.

2. Динамикти туташтыруу:

• Connect your passive speakers to the "SPEAKERS" output terminals.
• Connect the left speaker to the "L+" and "L-" terminals.
• Connect the right speaker to the "R+" and "R-" terminals.
• Ensure proper polarity for optimal sound quality.

3. Audio Input Connection:

The amplifier supports three main audio input methods:

• Bluetooth: Смартфондордон, планшеттерден же компьютерлерден зымсыз байланыш үчүн.
• AUX: For wired connection via a 3.5mm audio jack from devices like TVs, computers, or MP3 players.
• USB: Аудио ойнотуу үчүн files directly from a USB flash drive or using the board as a USB sound card for a computer.

Image: An illustration demonstrating the various audio input options available on the amplifier board, including Bluetooth, 3.5mm AUX, and USB, with exampшайкеш келген түзмөктөрдүн саны аз.

4. Optional External Bluetooth Antenna:

The board includes a 1st Gen IPEX interface for an optional external Bluetooth antenna (purchased separately) to enhance Bluetooth signal reception.

Сүрөт: жакын план view of the 1st Gen IPEX interface on the amplifier board, where an optional external Bluetooth antenna can be connected.

Иштөө нускамалары

1. Күйгүзүү/өчүрүү:

Locate the power switch on the side of the board. Flip it to the "ON" position to power on the amplifier. Flip it to "OFF" to power off.

Image: A close-up of the power switch, clearly showing the "ON" and "OFF" positions for controlling the ampкөтөргүчтүн күчү.

2. Mode Selection and Indicator Lights:

The amplifier board features three indicator lights to show the current input mode:

• Жашыл жарык: Indicates USB mode.
• Кызыл жарык: Indicates AUX mode.
• Көк жарык: Indicates Bluetooth mode.

To switch modes, quadruple-click the multi-function master volume knob.

Сүрөт: жакын план view of the three indicator lights (USB, AUX, BT) on the amplifier board, which illuminate to show the active audio input mode.

3. Multi-Function Master Volume Knob:

This knob controls various audio functions:

• Айлантуу: Үндүн жалпы деңгээлин тууралайт.
• Бир чыкылдатуу: Pauses or plays audio.
• Эки жолу басуу: Кийинки трекке өтүү.
• Үч жолу басуу: Returns to the previous track.
• Quadruple Click: Switches between input modes (USB, AUX, Bluetooth).
• Узак басуу: Түзмөктү КҮЙГҮЗҮП/ӨЧҮРӨТ.

Сүрөт: жакын план view of the three control knobs on the amplifier board, used for master volume, treble adjustment, and bass adjustment.

4. Bluetooth жупташтыруу:

1. камсыз кылуу amplifier is powered on and in Bluetooth mode (blue indicator light).
2. Түзмөгүңүздө (смартфон, планшет) Bluetooth иштетип, жеткиликтүү түзмөктөрдү издеңиз.
3. Select "XY-T1002P" from the list to pair.
4. Once paired, the blue indicator light may become solid or flash differently depending on the connection status.

5. AUX киргизүү:

Connect your audio source to the 3.5mm AUX input jack. Switch the amplifier to AUX mode (red indicator light) using the multi-function knob.

6. USB Input:

Аудио камтыган USB флэш-дискти салыңыз files into the USB port. Switch the amplifier to USB mode (green indicator light). The amplifier will automatically detect and play compatible audio files (WAV, FLAC, APE, MP3). For USB sound card functionality, connect the amplifier to your computer via a USB cable and select it as the audio output device.

7. Treble and Bass Adjustment:

Use the dedicated "TREBLE" and "BASS" knobs to fine-tune the high and low frequencies of your audio output to your preference.

Техникалык тейлөө

• Тазалоо: Бетти тазалоо үчүн жумшак, кургак чүпүрөктү колдонуңуз ampСуюк тазалоочу каражаттарды же эриткичтерди колдонбоңуз.
• Сактагыч: Аппаратты колдонбогондо түз күн тийбеген жана өтө температурадан алыс салкын, кургак жерде сактаңыз.
• Вентиляция: айланасында жетиштүү желдетүүнү камсыз кылуу amplifier board during operation to prevent overheating.

Проблемаларды чечүү

Техникалык шарттар

Эскертүү: Жетиштүү томtage and current input are required for optimal power output. Higher voltage and current generally result in higher power. Under the same conditions, a smaller speaker impedance yields greater power.

Image: A table detailing the power output of the amplifier board at different input voltages and speaker impedances.

Image: A diagram showing the physical dimensions of the amplifier board, including length, width, and height, along with knob cap length and product weight.

Кепилдик жана колдоо

For warranty information and technical support, please refer to the seller's policy or contact Daakro customer service through the platform where the product was purchased. Keep your purchase receipt for warranty claims.