Introduction
The HPBS 5000A Jump Starter with Air Compressor (Model A1) is a multi-functional portable device designed for automotive emergencies and general utility. It combines a powerful jump starter capable of restarting 12V vehicles with up to 10.0L gasoline and 8.0L diesel engines, a 150 PSI tire inflator, a power bank for charging electronic devices, and an LED flashlight with SOS and strobe functions. This manual provides essential information for safe and effective use.
Figure 1: HPBS 5000A Jump Starter with Air Compressor (Model A1)
Коопсуздук маалыматы
Always adhere to the following safety guidelines to prevent injury or damage to the device and vehicle:
- Do not use the air pump function continuously for more than 10 minutes. Allow a 10-minute rest period after each 10 minutes of continuous use to prevent overheating.
- Charge the jump starter fully upon first receipt.
- It is recommended to start the car when the jump starter's power level is above 75%.
- Recharge the jump pack every 2-3 months to extend battery life, even if not in use.
- Avoid using the jump starter on cars with an engine displacement exceeding the specified limits (10.0L gasoline, 8.0L diesel).
- Wait 30 seconds between jump-start attempts to prevent overheating.
- The device features 10 built-in protections (reverse connection, overcurrent, overvoltage, overload, overcharge/discharge, etc.) to ensure safe operation. Indicator lights and beeping sounds from the smart jumper clamps will alert you to incorrect connections or errors.
- Балдар жетпеген жерде сактаңыз.
- Агрегатты ажыратпаңыз.
Figure 2: Built-in Smart BMS Safety System protections.
Пакеттин мазмуну
Пакетиңизде бардык буюмдар бар экенин текшериңиз:
- 1 x HPBS 5000A Jump Starter with Air Compressor
- 1 x Smart Jumper кабели
- 1 x USB Type-C заряддоо кабели
- 1 x сактоо кутучасы
- 1 x Насос түтүгү
- 4 х аба учтары
- 1 х Колдонуучунун колдонмосу (бул документ)
Figure 3: All items included in the HPBS 5000A Jump Starter package.
Орнотуу жана заряддоо
Before initial use, fully charge the HPBS 5000A Jump Starter. This ensures optimal performance and extends battery life.
- Connect the provided USB Type-C charging cable to the charging port on the jump starter.
- USB кабелинин экинчи учун ылайыктуу USB кубат адаптерине (кошулмада жок) же кубаттуу USB портуна туташтырыңыз.
- The digital display will indicate the charging status. Charge until the battery indicator shows full.
Эскертүү: For best results and to maintain battery health, recharge the unit every 2-3 months, even when not in active use.
Figure 4: Charging the HPBS 5000A Jump Starter.
Иштөө нускамалары
1. Унааны баштоо
Унааны от алдырууга аракет кылуудан мурун, стартердин кеминде 75% заряддалганын текшериңиз.
- Connect Smart Jumper Cable: Insert the smart jumper cable into the jump starter's port. Ensure a secure connection.
- Унаа батареясына туташуу: Кызыл (+) clamp to the positive terminal of the car battery. Attach the black (-) clamp унаа батареясынын терс терминалына.
- Байланышты текшерүү: The LED indicator on the smart jumper cable should turn green, indicating a correct and safe connection. If it shows red or beeps, check the connections for polarity or other errors.
- Унаа баштоо: Once the indicator is green, start your car's engine.
- Clamps: After the car starts, immediately remove the jumper clamps from the car battery, then disconnect the smart jumper cable from the jump starter.
Figure 5: Correct connection and steps for jump starting a vehicle.
Video 1: Official demonstration of the HPBS Jump Starter with Air Compressor in use for jump starting.
2. Using the Tire Inflator (Air Compressor)
The 150 PSI air compressor can inflate tires for cars, motorcycles, bikes, and other inflatables using the included nozzles.
- Аба түтүгүн туташтыруу: Screw the pump tube securely onto the air outlet port of the jump starter.
- Соплолорду бекитүү: Select the appropriate air nozzle for your item (car tire, bike valve, ball needle) and attach it to the pump tube.
- Элементке туташуу: Connect the nozzle to the tire valve or inflatable item.
- Күйгүзүү жана тандоо режими: Turn on the jump starter. Short press the 'M' button to cycle through inflation modes (Car, Motorcycle, Bicycle, Ball). The display will show the current pressure and target pressure.
- Максаттуу басымды коюу: Use the '+' and '-' buttons to set your desired target pressure. The unit supports PSI, KPA, BAR, and KG/CM².
- Инфляциянын башталышы: Long press the 'OK' button to begin inflation. The compressor will automatically stop once the target pressure is reached.
- Ажыратуу: Disconnect the nozzle and pump tube.
Маанилүү: Allow the compressor to cool for at least 10 minutes after 10 minutes of continuous use to prevent damage from overheating.
Figure 6: Using the portable tire inflator function with detailed steps.
Video 2: Short demonstration of the HPBS Jump Starter's air compressor inflating a tire.
3. Power Bank катары колдонуу
The jump starter can charge USB-powered devices like smartphones and tablets.
- Connect your device's USB charging cable to the USB output port on the jump starter.
- Секирип баштоочу түзмөгүңүздү автоматтык түрдө кубаттай баштайт.
Figure 7: Using the jump starter as a portable power bank.
4. Светодиоддук кол чыракты колдонуу
Орнотулган LED фонарь ар кандай кырдаалдар үчүн бир нече режимдерди сунуштайт.
- Күйгүзүү/өчүрүү: Жарыкты күйгүзүү же өчүрүү үчүн фонарь баскычын басып, кармап туруңуз.
- Режимдерди өзгөртүү: Short press the flashlight button to cycle through modes: Normal, SOS, and Strobe.
Figure 8: The 400-lumen LED flashlight with SOS and Strobe functions.
Техникалык тейлөө
Proper maintenance ensures the longevity and reliability of your HPBS 5000A Jump Starter.
- Кадимки заряддоо: Recharge the unit every 2-3 months to maintain battery health, even if it has not been used.
- Сактагыч: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. The operating temperature range is -4°F to 140°F (-20°C to 60°C).
- Тазалоо: Аппаратты жумшак, кургак чүпүрөк менен сүртүңүз. Катуу химиялык заттарды же абразивдүү тазалагычтарды колдонбоңуз.
- Аба компрессордук муздатуу: Always allow the air compressor to cool down for at least 10 minutes after 10 minutes of continuous operation.
Figure 9: The jump starter is designed to operate in various environmental conditions.
Проблемаларды чечүү
Эгер көйгөйлөргө туш болсоңуз, төмөнкү жалпы көйгөйлөрдү жана чечимдерди караңыз:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Түзмөк күйбөй жатат. | Батарея түгөнүп калды. | Түзмөктү USB Type-C кабели аркылуу толук кубаттаңыз. |
| Car does not start after jump-start attempt. | Туура эмес clamp connection; jump starter battery too low; vehicle battery severely damaged. | Камсыз кылуу clamps are connected correctly (red to +, black to -) and the smart cable indicator is green. Ensure jump starter is above 75% charge. If issues persist, consult a mechanic. Wait 30 seconds between attempts. |
| Air compressor does not inflate or stops prematurely. | Hose not securely connected; target pressure reached; overheating; low device battery. | Check all hose and nozzle connections. Verify target pressure setting. Allow device to cool if used continuously for over 10 minutes. Charge the device if battery is low. |
| Smart jumper cable indicator shows red or beeps. | Reverse polarity connection; short circuit; overcurrent. | Дароо clamps and re-connect them correctly (red to positive, black to negative). If the issue persists, there might be a fault with the vehicle battery or the smart cable. |
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | HPBS |
| Модель номери | A1 |
| Чоку Ampөчүрүү | 5000 Amps |
| Мотор шайкештиги | 10.0 л чейин бензин, 8.0 л дизель |
| Тtage | 12 вольт |
| Батарея клеткасынын курамы | Литий полимери |
| Батарея сыйымдуулугу | 59.2 Amp Саат |
| Аба компрессорунун басымы | 150 PSI |
| Аба агымынын ылдамдыгы | 30л/мин |
| Продукциянын өлчөмдөрү (D x W x Y) | 5.5" x 8.46" x 4.7" |
| Элемент Салмагы | 1.6 фунт |
| Иштөө температурасы | -4°F – 140°F (-20°C – 60°C) |
| Коопсуздук сертификаттары | UL, FCC, IEC standards compliant |
Кепилдик жана колдоо
Your HPBS 5000A Jump Starter comes with a comprehensive warranty and dedicated customer support.
- Кепилдик: Enjoy peace of mind with a 24-month warranty covering manufacturing defects and quality-related issues.
- Кардарларды колдоо: 24/7 customer support is available for any questions or assistance you may need. Please refer to the contact information provided in your package or on the official HPBS webсайт.