plplaaoo WT87B Bluetooth Digital Anemometer Instruction Manual

1. Киришүү

The plplaaoo WT87B Bluetooth Digital Anemometer is a high-precision handheld device designed for measuring wind speed and temperature. It features an LCD backlight display for clear readings in various lighting conditions, Bluetooth and USB connectivity for data transmission, and a durable ABS plastic construction suitable for outdoor use. This manual provides detailed instructions for the proper setup, operation, and maintenance of your anemometer.

2. Коопсуздук маалыматы

• Аппаратты колдонуудан мурун бардык нускамаларды кылдат окуп чыгыңыз.
• Do not attempt to disassemble or modify the anemometer, as this may void the warranty and cause damage.
• Аппаратты экстремалдык температурадан, тике күн нурларынан жана жегич суюктуктардан алыс кармаңыз.
• Батареянын полярдуулук белгилерине ылайык туура салынганын текшериңиз.
• Колдонулган батарейкаларды жергиликтүү эрежелерге ылайык таштаңыз.

3. Пакеттин мазмуну

Сураныч, пакетте төмөнкү нерселерди текшериңиз:

• plplaaoo WT87B Digital Anemometer
• Кездеме сумка
• Асма аркан
• USB кабели
• Көрсөтмө (бул документ)

Note: A 9V battery (6F22 type) is required but not included in the package.

4. Продукт бүтүп калдыview

The WT87B anemometer is designed for ease of use and accurate measurements. Below are key components and features:

4.1-сүрөт: Фронт view of the anemometer, highlighting the wind impeller and LCD display.

4.2-сүрөт: Жогорудан төмөн view of the anemometer, illustrating the button layout for various functions.

Негизги өзгөчөлүктөрү:

• High-precision wind speed measurement (0-30m/s)
• Real-time, average, maximum, and minimum wind speed readings
• LCD backlight display for readability
• Bluetooth and USB connectivity for data transmission
• Unit switching (m/s, km/h, ft/min, knots, mph)
• Маалыматты кармоо функциясы
• LED жарык функциясы

5. Орнотуу

5.1 Батареяны орнотуу

1. Locate the rear power cover on the back of the anemometer.
2. Disassemble the rear power cover by sliding or unscrewing it.
3. Insert one 9V (6F22 type) battery into the battery compartment, ensuring correct polarity.
4. Close the power cover tightly.

5.1-сүрөт: Illustration of the anemometer, including a visual guide for battery installation and button functions.

6. Иштөө нускамалары

6.1 Күйгүзүү/өчүрүү жана жарык

• To power on the device, press the red power button (LED button). The display will show the current ambient wind speed and temperature.
• To turn on the LCD backlight, press the power button again briefly.
• To power off, press and hold the red power button.

6.2 Шамалдын ылдамдыгын өлчөө режимдери

• Реалдуу убакыттагы өлчөө: The device displays the current wind speed by default after power-on.
• Maximum/Minimum/Average Measurement: басыңыз UP/MIN/MAX button to cycle through maximum, minimum, and current wind speed display modes.
• Average Wind Speed: басыңыз VEL/ORT button to measure and display the average wind speed.

6.3 Бирдикти которуу

To switch between wind speed units (m/s, km/h, ft/min, knots, mph), press the БИРДИК/ТӨМӨН баскычы.

6.4 Data Hold and Settings

• басыңыз ОРНОТУ/ТУРУУ key to enter the setting menu or to activate the data saving mode (data hold).
• When data hold is active, the displayed reading will be frozen. Press again to release.

6.5 LED Жарык Функциясы

басыңыз ЖАРЫК/КИРҮҮ key to turn on the integrated LED light or to confirm a function within the settings menu.

6.6 Bluetooth & USB Connectivity

The anemometer supports seamless connection to a mobile phone via Bluetooth or to a computer via USB. This allows for stable and reliable data transmission. Utilize the companion app (if available for your mobile device) to monitor and analyze wind speed data with enhanced functionality.

7. Техникалык тейлөө

• Тазалоо: Аппаратты тазалоо үчүн жумшак, кургак чүпүрөктү колдонуңуз. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
• Сактагыч: When not in use for extended periods, remove the battery to prevent leakage. Store the anemometer in a cool, dry place, away from direct sunlight and extreme temperatures.
• Impeller Care: Ensure the wind impeller is free from dust, debris, or obstructions for accurate readings.

8. Кыйынчылыктарды

• Түзмөк күйбөйт: Check if the 9V battery is installed correctly and has sufficient charge. Replace the battery if necessary.
• Туура эмес окуулар: Ensure the impeller is spinning freely and is not obstructed. Verify that the device is held in an open area, away from obstacles that could affect airflow.
• Bluetooth/USB connection issues: Ensure Bluetooth is enabled on your mobile device or that the USB cable is securely connected to your computer. Restart the anemometer and your connecting device if issues persist.
• Дисплей күңүрт же бүлбүлдөп жатат: The battery may be low. Replace the 9V battery.

9. Техникалык шарттар

10. Кепилдик маалыматы

Specific warranty details for the plplaaoo WT87B Digital Anemometer are not provided in the product information. Please refer to the retailer's return policy or contact the manufacturer directly for warranty terms and conditions.

11. Колдоо

For technical assistance, troubleshooting, or further inquiries regarding your plplaaoo WT87B Digital Anemometer, please contact the seller or manufacturer through their official support channels. Refer to your purchase documentation for contact information.