AstroAI H2 Pro Cordless Tire Inflator User Manual

1. Киришүү

Thank you for choosing the AstroAI H2 Pro Cordless Tire Inflator. This portable air compressor is designed for convenient and efficient inflation of various items, including car tires, motorcycle tires, bicycle tires, and sports balls. Featuring dual power supplies (DC 12V and built-in lithium battery), automatic shut-off, and an LED display, this device ensures reliable performance wherever you go. Please read this manual thoroughly before use to ensure proper operation and safety.

2. Коопсуздук нускамалары

• Always ensure the inflator is placed on a stable, flat surface during operation to prevent movement due to vibration.
• Үйлөткүчтү колдонуп жатканда кароосуз калтырбаңыз.
• Allow the pump to cool for at least 10 minutes after 15 minutes of continuous use to prevent overheating.
• Аппаратты балдардан жана үй жаныбарларынан алыс кармаңыз.
• Үйлөгүчтү нымдуу шарттарда же тез күйүүчү суюктуктардын же газдардын жанында иштетпеңиз.
• Ensure the correct pressure is set for the item being inflated to avoid over-inflation, which can cause damage or injury. Refer to the item's manufacturer recommendations for appropriate pressure levels.
• Disconnect the power source when not in use or before performing any maintenance.

3. Пакеттин мазмуну

• AstroAI H2 Pro Cordless Tire Inflator
• DC 12V Power Cable
• Air Hose with Screw-on Connector
• Ар кандай сопло адаптерлери (шарлар, велосипеддер ж.б. үчүн)
• User Manual

4. Продукт бүтүп калдыview

The AstroAI H2 Pro is a compact and versatile tire inflator designed for ease of use and portability. It features a digital display, intuitive controls, and a built-in LED light for nighttime use.

Figure 1: AstroAI H2 Pro Cordless Tire Inflator, showcasing анын компакттуу дизайны жана интеграцияланган туткасы.

Негизги өзгөчөлүктөрү:

• Dual Power Supplies: Operates via DC 12V car power outlet or built-in lithium battery for maximum flexibility.
• Тез инфляция: Upgraded cylinder design for quicker inflation times.
• Автоматтык түрдө өчүрүү: Алдын ала коюлган басымга жеткенде автоматтык түрдө токтойт.
• LED дисплей: Clear digital display shows real-time pressure and preset values.
• Бир нече бирдиктер: Supports PSI, BAR, KPA, and KG/CM².
• Камтылган LED жарык: Жарыгы аз шарттарда колдонуу үчүн жарыктандырууну камсыз кылат.
• Интегралдык сактагыч: Convenient compartment for storing accessories.

Figure 2: Close-up of the AstroAI H2 Pro's LED display and control buttons for setting pressure and units.

5. Орнотуу

Before first use, ensure the device is fully charged if using the battery power supply. Connect the DC 12V power cable to your vehicle's cigarette lighter socket or ensure the internal battery is charged.

Figure 3: Demonstrates connecting the AstroAI H2 Pro using either the DC 12V power cable or utilizing its internal battery.

Connecting the Air Hose:

1. Uncoil the air hose from its storage compartment.
2. Screw the air hose connector onto the valve stem of the item you wish to inflate. Ensure a tight seal to prevent air leakage.

6. Иштөө нускамалары

Step-by-Step Inflation:

1. Күйгүзүү: Connect the power source (DC 12V or internal battery) and press the power button to illuminate the screen.
2. Бирдикти тандоо: Press the 'M' button to cycle through the available pressure units (PSI, BAR, KPA, KG/CM²) until your desired unit is displayed.
3. Орнотуу басымы: Use the '+' and '-' buttons to set the target pressure value. The screen will display both the preset value and the current pressure.
4. Тирге туташуу: Securely attach the air hose to the tire valve stem.
5. Инфляциянын башталышы: Press the start button to begin inflation. The compressor will automatically shut off once the preset pressure is reached.
6. Ажыратуу: Once inflation is complete, disconnect the air hose from the valve stem and store the hose and power cable in their designated compartments.

LED жарыгын колдонуу:

The built-in LED light can be activated by pressing the light button. It offers different modes, including a steady light for illumination and a strobe light for emergency signaling.

Figure 4: The AstroAI H2 Pro demonstrating its built-in LED light, useful for nighttime or low-light conditions.

Ар тараптуу колдонмолор:

The AstroAI H2 Pro is suitable for a wide range of inflation needs:

• Машиналар: Inflates a flat tire (0 PSI to 36 PSI) in approximately 4 minutes and 30 seconds.
• Мотоциклдер: Ideal for maintaining optimal tire pressure.
• Велосипеддер: Includes adapters for various bicycle valve types.
• Спорттук топтор: Easily inflates basketballs, footballs, and other inflatables with the appropriate nozzle.

Figure 5: The AstroAI H2 Pro shown inflating various items, including car tires, motorcycle tires, bicycle tires, and sports balls.

7. Техникалык тейлөө

• Тазалоо: Жарнак менен толтургучтун сыртын сүртүңүзamp кездеме. Катуу химиялык заттарды же абразивдүү тазалагычтарды колдонбоңуз.
• Сактагыч: Store the inflator in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the air hose and power cable are neatly stored in the integrated compartments.
• Батареяга кам көрүү: If using the battery, charge it regularly, even if not in frequent use, to prolong its lifespan.
• Шланг текшерүү: Periodically check the air hose for any signs of wear, cracks, or damage. Replace if necessary.

Figure 6: The AstroAI H2 Pro with its integrated storage compartment open, showing how accessories are neatly organized.

8. Кыйынчылыктарды

9. Техникалык шарттар

10. Кепилдик жана колдоо

The AstroAI H2 Pro Cordless Tire Inflator comes with a 2 жылдык Өндүрүүчүнүн Кепилдиги. For warranty claims, technical support, or any questions regarding your product, please contact AstroAI customer service. You can typically find contact information on the official AstroAI webсайт же сатып алуу платформасы аркылуу.

Кепилдикти текшерүү үчүн сатып алганыңыздын далилин сактап коюңуз.