CREWORKS 10L Ultrasonic Cleaner Instruction Manual

1. Киришүү

Thank you for choosing the CREWORKS 10L Ultrasonic Cleaner. This professional-grade unit is designed for efficient and thorough cleaning of various items using ultrasonic cavitation. This manual provides essential information for safe operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device. Please read these instructions carefully before first use and retain them for future reference.

2. Коопсуздук нускамалары

• Ар дайым түзмөктү жерге туташтырылган розеткага туташтырыңыз.
• Бакта суюктук жок болсо, түзмөктү иштетпеңиз.
• Электр шнурунун бузулбагандыгын текшериңиз жана ага оор нерселерди коюудан алыс болуңуз.
• Keep the unit away from water splashes and do not immerse the main body in water.
• Электр сайгычын нымдуу колуңуз менен кармабаңыз.
• Тазалоодон же тейлөөдөн мурун блокту розеткадан сууруп алыңыз.
• Балдар жана үй жаныбарлары жетпеген жерде сактаңыз.
• Use appropriate cleaning solutions. Avoid flammable, corrosive, or highly acidic/alkaline liquids.
• Do not operate the unit continuously for extended periods without allowing it to cool down.
• Иштеп жаткан учурда блоктун айланасын туура желдетүүнү камсыз кылыңыз.

3. Продукт бүтүп калдыview

The CREWORKS 10L Ultrasonic Cleaner features a robust 304 stainless steel tank and housing, designed for durability and resistance to corrosion. It incorporates a 240W ultrasonic transducer for powerful cleaning and a 300W heater for optimal temperature control. The intuitive analog control panel allows for precise adjustment of cleaning parameters.

This image shows the CREWORKS 10L Ultrasonic Cleaner from the front, highlighting its stainless steel construction and the analog control panel with two rotary knobs and toggle switches.

Негизги компоненттер:

• Дат баспас болоттон жасалган танк: 10-liter capacity, made from high-quality 304 stainless steel.
• Капкак: Reinforced lid to reduce noise during operation.
• Башкаруу панели: Analog dials for temperature and timer, with toggle switches for special modes.
• Дренаж клапаны: Convenient brass valve for easy liquid drainage.
• Интеграцияланган туткалары: For easy and safe transport of the unit.
• Тазалоочу себет: Removable stainless steel basket for holding items during cleaning.

A close-up shot of the control panel, clearly showing the temperature and timer dials, along with the power switch and mode selection buttons for Degas and Half-Wave (Delicate) cleaning.

This image shows the ergonomic integrated side handle for easy portability and the robust stainless steel basket designed to hold items during cleaning.

4. Орнотуу

1. Пакеттен чыгаруу: Carefully remove the ultrasonic cleaner from its packaging. Inspect the unit for any signs of damage.
2. Жайгашкан жери: Place the unit on a stable, level, and dry surface. Ensure there is adequate ventilation around the cleaner.
3. Резервуарды толтуруу: Open the lid and fill the stainless steel tank with an appropriate cleaning solution. Ensure the liquid level is between the MIN and MAX marks. Do not overfill.
4. Туташуу күчү: Электр шнурын жерге туташтырылган электр розеткасына сайыңыз.
5. Жүктөөлөр: Place the items to be cleaned into the stainless steel basket. Lower the basket into the tank, ensuring items are fully submerged but not touching the bottom of the tank directly.

5. Иштөө нускамалары

Негизги операция:

1. Күйгүзүү: Turn the main power switch to the 'ON' position.
2. Температураны коюу: Rotate the 'TEMPERATURE' knob to set the desired cleaning temperature between 20°C and 80°C. The 300W heater will begin warming the solution. For faster heating, you may use pre-warmed water.
3. Таймерди коюу: Rotate the 'TIME' knob to set the desired cleaning duration, from 1 to 30 minutes.
4. Тазалоону баштоо: The ultrasonic cleaning will start automatically once the timer is set. The unit will stop when the timer counts down to zero.

Атайын режимдер:

• Degas Function: Activate the 'DEGAS' toggle switch. This function expels air bubbles from the cleaning liquid, maximizing cavitation effectiveness for deeper cleaning. It is recommended to run Degas for a few minutes before starting a cleaning cycle, especially with fresh solution.


An illustrative image demonstrating the Degas function, where air bubbles are expelled from the cleaning solution to enhance cavitation and cleaning efficiency.

• Delicate (Half-Wave) Mode: Activate the 'SEMI-WAVE' toggle switch. This mode modulates the ultrasonic power, providing a gentler cleaning action suitable for fragile items such as delicate jewelry, PCBs, or lenses, preventing potential damage.


This image visually represents the Delicate (Half-Wave) mode, indicating how ultrasonic power is modulated to provide a gentler cleaning action for sensitive items.

Тазалагандан кийин:

1. When the cleaning cycle is complete, turn off the unit.
2. Carefully lift the basket out of the tank.
3. Rinse the cleaned items with clean water and dry them thoroughly.
4. Резервуарды төгүү: Place a suitable container under the drain valve. Open the drain valve to empty the cleaning solution. Close the valve once the tank is empty.

A visual comparison showing the effectiveness of the ultrasonic cleaner on various items, with 'Before' and 'After' images of dirty eyeglasses, a used razor blade, and a tarnished printed circuit board.

6. Техникалык тейлөө

• Агрегатты тазалоо: After each use, especially after draining, wipe the inside of the tank and the exterior of the unit with a soft, damp кездеме. Абразивдүү тазалагычтарды колдонбоңуз же аппаратты сууга салбаңыз.
• Basket Care: Clean the stainless steel basket regularly to prevent residue buildup.
• Сактагыч: Store the ultrasonic cleaner in a cool, dry place when not in use. Ensure the tank is empty and dry.
• Үзгүлтүксүз текшерүүлөр: Periodically inspect the power cord and plug for any damage. Ensure the drain valve operates smoothly.

7. Кыйынчылыктарды

8. Техникалык шарттар

A diagram showing the external dimensions of the ultrasonic cleaner (33x27x27.5 cm) and the internal dimensions of the tank (30x24x15 cm) and basket (28.3x21.5x12 cm).

9. Кепилдик жана колдоо

CREWORKS products are manufactured to high-quality standards. For warranty information or technical support, please refer to the documentation included with your purchase or contact your retailer. Keep your purchase receipt as proof of purchase for any warranty claims.