Bewinner 7-in-1 Digital Wall Scanner Stud Finder Detector User Manual

1. Киришүү

This manual provides detailed instructions for the safe and effective use of your Bewinner 7-in-1 Digital Wall Scanner Stud Finder Detector. This device is designed to accurately locate wood studs, metal objects (such as rebar, copper pipes), and live AC wires behind various wall materials. Please read this manual thoroughly before operation and retain it for future reference.

2. Коопсуздук маалыматы

• Always exercise caution when scanning walls, especially when live AC wire detection is indicated.
• Do not rely solely on the detector to determine the presence of live electrical wires. Always turn off power to the area before drilling or cutting into walls.
• Wear appropriate personal protective equipment (PPE) such as safety glasses when drilling or cutting.
• Түзмөктү кургак жана таза кармаңыз. Аны нымдуулукка же өтө жогорку температурага дуушар кылбаңыз.
• Бул шайман оюнчук эмес. Балдар жетпеген жерде сактаңыз.
• Батареяларды жергиликтүү эрежелерге ылайык таштаңыз.

3. Продукциянын өзгөчөлүктөрү

• 7-in-1 Multifunctional Scanning: Detects wood studs (12mm/25mm/38mm depths), metal (iron/copper/aluminum, >60mm), and live AC wires (up to 51mm).
• Intuitive LCD Display & Guidance: Features a clear backlit LCD screen showing real-time signal strength, complemented by multi-color LED indicators (red/yellow/green) and audible alerts for precise location.
• Easy & Efficient Operation: Automatic calibration upon startup, one-touch mode switching, ergonomic anti-slip grip, and auto power-off after 5 minutes of inactivity to conserve battery.
• Ар тараптуу беттик шайкештиги: Effectively scans concrete, tile, wood panels, ceilings, and floors.
• Reliable & Durable Build: Engineered with high-sensitivity sensor chips and a robust ABS housing for consistent, accurate detection.
• Камтылган магнит: For convenient attachment to metal surfaces during use.

4. Пакеттин мазмуну

• Bewinner 7-in-1 Digital Wall Scanner Stud Finder Detector
• User Manual

Note: A 9V battery is required for operation and is not included in the package.

5. Түзмөктүн жайгашуусу

Сүрөт 5.1: Алдыңкы View
This image displays the front of the wall scanner, featuring the central LCD screen and the yellow 'MODE' button below it. The top section has measurement markings in millimeters.

5.2-сүрөт: Артка View
The back of the device is shown, highlighting the battery compartment cover at the bottom and product information labels in the center, including 'Stud Finder' and 'Battery: 6F22 9V'.

5.3-сүрөт: Каптал View
Бул сүрөт каптал профессионалды көрсөтөтfile of the wall scanner, clearly showing the 'SCAN' button located on the left side of the device, which is pressed during scanning operations.

Негизги компоненттер:

1. LCD дисплей: Shows detection mode, signal strength, battery status, and center/edge indicators.
2. MODE баскычы: Press to switch between Wood, Metal, and AC Wire detection modes.
3. SCAN баскычы: Located on the side, press and hold during scanning.
4. Сенсор аянты: Located on the back of the device, this area must be flat against the wall during scanning.
5. Батарея бөлүмү: Located on the back, holds one 9V battery.
6. LED көрсөткүчтөрү: (Red/Yellow/Green) Provide visual feedback on detection.
7. Үн сигналы: Beeps to indicate detection.

6. Орнотуу

6.1 Батареяны орнотуу

1. Аппараттын артындагы батарея бөлүкчөсүнүн капкагын табыңыз (5.2-сүрөттү караңыз).
2. Капкакты жылдырыңыз.
3. Туура полярдуулукту (+/-) камсыз кылып, бир 9V батареяны салыңыз.
4. Батарея уясынын капкагын бекем жабыңыз.

6.2 Баштапкы калибрлөө

The device features automatic calibration. To ensure accurate readings:

1. Place the device flat against the wall surface where you intend to scan. Ensure there are no known studs, metal, or wires directly beneath the device during calibration.
2. Press and hold the 'SCAN' button. The device will automatically calibrate. Wait for the calibration process to complete (usually a few seconds) before moving the device.
3. The LCD will show a stable reading, indicating it is ready for use.

7. Иштөө нускамалары

7.1 Күйгүзүү/өчүрүү

The device powers on automatically when the 'SCAN' button is pressed and held. It will automatically shut off after 5 minutes of inactivity to conserve battery life.

7.2 Режимди тандоо

Press the 'MODE' button to cycle through the available detection modes:

• Wood Stud аныктоо: For locating wood studs at 12mm, 25mm, or 38mm depths.
• Металл аныктоо: For identifying ferrous and non-ferrous metals (e.g., iron, copper, aluminum) up to >60mm depth.
• Түз AC зымдарын аныктоо: For detecting live unshielded AC wires (90-250V) up to 51mm depth.

7.3 Сканерлөө процедурасы

1. Select the desired detection mode using the 'MODE' button.
2. Түзмөктү дубалдын бетине тегиз коюңуз.
3. Press and hold the 'SCAN' button. Ensure the device is calibrated on a clear section of the wall.
4. Slowly slide the device horizontally across the wall surface. Keep it flat and maintain constant contact.
5. Observe the LCD display and listen for audible alerts.
6. When an object is detected, the signal strength bars on the LCD will increase, and LED indicators will light up (yellow/red). An audible beep will also sound.
7. Mark the edges of the detected object. Continue scanning past the object, then scan back from the opposite direction to confirm the edges and locate the center. The center indicator on the LCD will illuminate when the center is found.

7.4 Specific Detection Notes

• Жыгач шпилькалар: The device will indicate the edges and center of wood studs. For deeper studs, ensure the appropriate depth mode is selected.
• Металл: The device detects both ferrous and non-ferrous metals. It will indicate the presence and approximate location.
• Live AC Wires: Detection is most effective for unshielded, live wires. Always confirm power is off before any work. The detection depth for AC wires can be affected by wall material and moisture.

8. Техникалык тейлөө

• Тазалоо: Аппаратты жумшак менен сүртүңүз, гamp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
• Сактагыч: Store the device in a dry, cool place away from direct sunlight and extreme temperatures. If storing for extended periods, remove the battery to prevent leakage.
• Батареяны алмаштыруу: Replace the 9V battery when the low battery indicator appears on the LCD.

9. Кыйынчылыктарды

10. Техникалык шарттар

11. Кепилдик жана колдоо

Кепилдик жөнүндө маалымат же техникалык колдоо алуу үчүн, сатып алуу учурунда берилген документтерди караңыз же сатуучуга кайрылыңыз. Сатып алуунун далили катары сатып алуу дүмүрчөгүңүздү сактап коюңуз.