1. Киришүү
The EasyThreed K7 is a compact and user-friendly mini 3D printer designed for educational use and DIY enthusiasts. It features a 100x100x100mm print size, one-key printing, and a non-heated build plate for enhanced safety, making it suitable for children and beginners. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your EasyThreed K7 3D printer.
Figure 1: EasyThreed K7 Mini Desktop 3D Printer with exampбасылмалар.
2. Коопсуздук маалыматы
Please read all safety instructions carefully before operating the printer to prevent injury or damage to the device.
- Ысык беттер: The extruder nozzle can reach high temperatures. Avoid touching the nozzle during operation or immediately after printing.
- Кыймылдуу бөлүктөр: Иштеп жатканда колдоруңузду, чачыңызды жана кенен кийимдериңизди кыймылдуу бөлүктөрдөн алыс кармаңыз.
- Вентиляция: Принтерди жакшы желдетилген жерде иштетиңиз.
- Электр камсыздоо: Use only the provided power adapter. Ensure the power supply is stable and matches the printer's requirements.
- Балдардын коопсуздугу: The EasyThreed K7 features a non-heated bed, which enhances safety, especially for younger users. However, adult supervision is always recommended when children are operating the printer.
- Filament иштетүү: Басып чыгаруунун сапатына таасир этиши мүмкүн болгон нымдуулукту сиңирип албаш үчүн жипчени кургак жерде сактаңыз.
3. Пакеттин мазмуну
Пакетиңизде бардык буюмдар бар экенин текшериңиз:
- 1 x EasyThreed K7 3D Printer Kit
- 1 x жип кармагыч
- 1 x TF Card (4G+)
- 1 х Картаны окугуч
- 1 x 5m PLA Filament (Random Color)
- 1 х Бурама айдоочу
- 4 х бурамалар
- 1 х Кубат кабели
- 1 x USB кабели
- 1 x User's Manual (Inside TF Card)
Figure 2: Package contents including TF card, USB cable, filament holder, power supply, screwdriver, screws, and PLA filament.
4. Орнотуу колдонмосу
Follow these steps to set up your EasyThreed K7 3D printer:
- Assemble the X.Z Axis: Install the X.Z axis assembly onto the base of the printer. Secure it with the four provided screws.
- Жип кармагычты орнотуу: Attach the filament holder to the designated slot on the printer.
Figure 3: Visual guide for installing the X.Z axis and filament holder.
- Туташуу кубаты: Кубат адаптерин принтердин кубат портуна, андан кийин розеткага сайыңыз.
- Filament жүктөө: Place the PLA filament spool onto the filament holder. Gently feed the end of the filament into the extruder's intake hole until it is gripped by the extruder motor.
- TF картасын салыңыз: Insert the provided TF card into the card slot on the printer.
For a visual guide on the assembly and initial setup, please watch the official setup video:
Video 1: EasyThreed K7 3D Printer Assembly and Filament Loading Guide.
5. Иштөө нускамалары
The EasyThreed K7 is designed for simple, one-key operation.
5.1 Preparing Your 3D Model
- Программалык камсыздоо: Use compatible slicing software such as Easyware K7, CURA, or Simplify3D to prepare your 3D models.
- File Формат: Your 3D model files should be in STL/OBJ format. The slicing software will convert these into GCODE files, which the printer understands.
- Кесүү: Load your STL/OBJ file into the slicer software. Adjust print settings (e.g., layer height, infill, print speed) as desired. Save the generated GCODE file TF картасына.
5.2 Printing Your Model
- Күйгүзүү: Ensure the printer is connected to power and the TF card with your GCODE file киргизилет.
- One-Key Printing: The EasyThreed K7 features a simple one-key printing function. Press the designated print button (refer to the printer's control panel for exact location) to start printing the model from the TF card.
- Мониторинг: Monitor the initial layers of your print to ensure proper adhesion to the build plate.
- Аяктоо: Once printing is complete, the printer will stop. Carefully remove the printed model from the detachable build platform.
Figure 4: Preparing a 3D model using slicing software on a computer.
6. Техникалык тейлөө
Үзгүлтүксүз тейлөө 3D принтериңиздин оптималдуу иштешин жана узак иштөөсүн камсыздайт.
- Насадканы тазалоо: Periodically clean any filament residue from the nozzle using a small brush or a needle (when the nozzle is slightly warm, but not hot).
- Курулуш плитасын тазалаңыз: After each print, clean the build plate to remove any adhesive residue or small plastic pieces. A clean surface is crucial for good print adhesion.
- Бошогон бурамаларды текшериңиз: Regularly inspect the printer for any loose screws or connections and tighten them if necessary.
- Кыймылдуу бөлүктөрүн майлоо: Occasionally, apply a small amount of lubricant to the smooth rods and lead screws to ensure smooth movement of the print head and build plate.
- Жипче сактоо: Store unused filament in a sealed bag with desiccant to prevent moisture absorption.
7. Кыйынчылыктарды
Бул жерде кээ бир жалпы маселелер жана алардын мүмкүн болуучу чечимдери:
- Басма курулуш плитасына жабышпайт:
- Ensure the build plate is clean and free of dust or grease.
- Verify that the first layer height and bed leveling are correctly set in your slicing software.
- Filament Extruding эмес:
- Check if the filament is properly loaded and not tangled.
- Ensure the nozzle is not clogged. You may need to perform a cold pull or use a cleaning needle.
- Verify the extruder temperature is set correctly for your PLA filament (180-230℃).
- Poor Print Quality (e.g., stringing, layer shifting):
- Типтерди кыскартуу үчүн кескич программаңыздагы тартуу жөндөөлөрүн тууралаңыз.
- Check belt tension and ensure all moving parts are secure to prevent layer shifting.
- Ensure the printer is on a stable surface to minimize vibrations.
- Принтер жооп бербей жатат:
- Бардык электр байланыштарын текшериңиз.
- Ensure the TF card is inserted correctly and contains valid GCODE files.
- Принтерди кайра өчүрүңүз.
8. Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Бренд аты | EasyThreed |
| Модел | K7 |
| Басып чыгаруу технологиясы | FDM |
| Басып чыгаруунун максималдуу өлчөмү | 100 * 100 * 100 мм |
| Соплолордун саны | 1 |
| Сопло диаметри | 0.4мм |
| Кесилген калыңдыгы | 0.1-0.4мм |
| Басып чыгаруу ылдамдыгы | 10-40мм/с |
| Filament | PLA |
| Consumables Diameter | 1.75мм |
| Басып чыгаруунун тактыгы | 0.1-0.2мм |
| Жылытылган керебет | ЖОК |
| Кескич программасы | Easyware K7, CURA, Simplify3D |
| Extruder Температурасы | 180-230℃ |
| Киргизүү көлөмүtage | AC 100-240V, 50/60Hz |
| Output Voltage | DC 12V, 5A |
| Күч | 30 Вт |
| Басып чыгаруу байланышы | TF Card/ USB Cable |
| File Формат | Input: STL/OBJ; Output: GCODE |
| Шайкеш система | Windows XP/7/8/10 (32/64 бит) |
| Машинанын өлчөмү | 17.5 * 23.5 * 27 см / 6.9 * 9.3 * 10.6 дюйм |
| Машинанын салмагы | 1 кг / 2.2 фунт |
| Пакеттин өлчөмү | 27 * 10 * 31 см / 10.6 * 3.9 * 12.2 дюйм |
| Пакет Салмагы | 1.6 кг / 3.5 фунт |
Figure 5: Detailed specifications of the EasyThreed K7 3D Printer.
Figure 6: Physical dimensions of the EasyThreed K7 printer.
9. Колдонуучунун кеңештери
No specific user tips were found in the provided reviews or Q&A content. However, users often find success by ensuring proper bed leveling and using recommended print settings for their chosen filament. Experimenting with different slicing software settings can also help optimize print quality for various models.
10. Кепилдик жана колдоо
The EasyThreed K7 Mini Desktop 3D Printer comes with a 12-month manufacturer's limited warranty for defective items. Accessories included with the printer are covered by a 3-month warranty. This warranty does not cover items damaged due to misuse or after the warranty period has expired.
For technical support, warranty claims, or any questions regarding your printer, please contact the seller or manufacturer directly. Ensure you have your order number and a detailed description of the issue ready when seeking support.
