VJOYCAR HUD Mirror MX10 Car Head-Up Display Instruction Manual

Introduction

The VJOYCAR HUD Mirror MX10 is an advanced Head-Up Display designed to enhance your driving experience by projecting essential vehicle data directly onto your windshield. This device connects via your car's OBD2 port, providing real-time information such as speed, engine RPM, voltage, coolant temperature, and fuel consumption. Its automatic mirror lift feature ensures convenience, while multiple display modes allow for personalized data presentation, all contributing to safer driving by minimizing the need to look away from the road.

Пакеттин мазмуну

Пакетиңизде бардык буюмдар бар экенин текшериңиз:

• 1 x HUD Main Host (MX10 Unit)
• 1 x 16-pin OBD Cable (1.8 meters)
• 1 x Орнотуу куралы
• 1 x тайгаланууга каршы аянтча
• 1 x User Manual
• 4 x Cable Fixers

Орнотуу жана орнотуу

Follow these steps to properly install and set up your VJOYCAR HUD Mirror MX10:

1. **Placement**: Choose a suitable flat surface on your dashboard, typically near the windshield, where the HUD unit can sit securely without obstructing your view. Use the provided anti-slip pad to prevent movement.
2. **Connect OBD Cable**: Locate your vehicle's OBD2 port (usually under the dashboard on the driver's side). Connect one end of the 1.8-meter OBD cable to the HUD unit and the other end to the car's OBD2 port.
3. **Route Cable**: Carefully route the OBD cable to conceal it and prevent interference with driving controls. Use the provided installation tool to tuck the cable into gaps along the dashboard or trim. Use cable fixers to secure any loose sections.
4. **Power On**: Once connected, turn your car's ACC (Accessory) on. The HUD unit will automatically power on, and the mirror will lift into position.
5. **Adjust Mirror Angle**: Press the up or down buttons on the unit to adjust the mirror angle for optimal visibility of the projected display on your windshield.

Иштөө нускамалары

The VJOYCAR MX10 HUD offers various functions and display modes for a customized driving experience.

Автоматтык иштетүү

• **Power On/Off**: The device automatically turns on when your car's ACC is on and turns off when the ACC is off. The mirror will lift and retract automatically with the car's power status.

Баскыч функциялары

• **Long Press to On/Off**: Press and hold the button to manually turn the device on or off. The mirror will lift or retract accordingly.
• **Up/Down Press to Adjust Screen Angle**: Briefly press the button up or down to adjust the projection angle of the display on the mirror.
• **Single Press In to Switch Interface**: Press the button inwards (straight down) once to cycle through different display interfaces/modes.

Дисплей режимдери

The MX10 offers multiple display configurations to suit your preferences:

• **Mode 1**: Speed + Oil Consumption + Clock
• **Mode 2**: Speed + Oil Consumption + Voltage
• **Mode 3**: Speed + Oil Consumption + Coolant Temperature
• **Mode 4**: Speed + Oil Consumption + Engine RPM

The display is designed for clear visibility both day and night.

Техникалык тейлөө

To ensure the longevity and optimal performance of your VJOYCAR HUD Mirror MX10, please follow these maintenance guidelines:

• **Cleaning**: Use a soft, dry cloth to gently wipe the display mirror and the unit's exterior. Avoid using abrasive cleaners or solvents, as they may damage the surface.
• **Cable Care**: Ensure the OBD cable is not pinched or excessively bent, which could lead to damage.
• **Storage**: If storing the device for an extended period, disconnect it from the OBD2 port and store it in a cool, dry place away from direct sunlight.

Проблемаларды чечүү

If you encounter issues with your VJOYCAR HUD Mirror MX10, please refer to the following common problems and solutions:

Шайкештик маселелери

The OBD2 working mode may not be compatible with certain vehicles:

• Almost 98% of cars manufactured before the year 2004 (including 2004 models).
• Some older oil-electric hybrid vehicles, diesel-powered cars, pickup trucks, SUVs, ORVs, and mini-buses.
• Other special car models.

If you are unsure about your vehicle's compatibility, please contact customer support for assistance.

Жалпы көйгөйлөрдү чечүү

• **No Display/Power**: Ensure the OBD cable is securely connected to both the HUD unit and the car's OBD2 port. Check if the car's ACC is on.
• **Incorrect Readings**: Verify that your vehicle is OBD2 compliant. If readings appear incorrect, consult the full user manual for calibration steps (if applicable) or contact technical support.
• **Mirror Not Lifting/Retracting**: Check the power connection. If the issue persists, try manually cycling the power by long-pressing the button.

Техникалык шарттар

Кепилдик жана колдоо

The VJOYCAR HUD Mirror MX10 comes with a 1-year warranty. For any technical assistance, questions, or support regarding your device, please contact VJOYCAR customer service. We are committed to providing continuous technical support to ensure your satisfaction.