RELIFE Quick 203H Series Thermostatic Soldering Iron Handle

1. Киришүү

Thank you for choosing the RELIFE Quick 203H Series Thermostatic Soldering Iron Handle. This manual provides essential information for the safe and effective use of your soldering tool, including models such as 20H-60 and 20H-90. This handle is designed to be used with a compatible soldering station (sold separately) to provide precise temperature control for various soldering applications. Please read this manual thoroughly before operation and retain it for future reference.

2. Коопсуздук маалыматы

• Always operate the soldering iron handle in a well-ventilated area to avoid inhaling fumes.
• Wear appropriate personal protective equipment, including safety glasses, to protect against solder splashes.
• Ширетүүчү уч өтө жогорку температурага жетет. Териге же тез күйүүчү материалдарга түз тийүүдөн алыс болуңуз.
• Always place the soldering iron handle in a suitable, heat-resistant stand when not in use.
• Ensure the soldering station is properly grounded.
• Do not use the soldering iron handle if the cable or connector is damaged.
• Балдар жетпеген жерде сактаңыз.
• Disconnect power from the soldering station before performing any maintenance or changing tips.

3. Пакеттин мазмуну

Please check the package contents upon receipt. If any items are missing or damaged, contact your supplier.

• RELIFE Quick 203H Series Soldering Iron Handle (e.g., 20H-60 or 20H-90)
• Soldering Iron Tip (pre-installed or separate)
• Колдонуучунун Колдонмосу (бул документ)

4. Продукт бүтүп калдыview

The RELIFE Quick 203H Series soldering iron handle features a robust design with a comfortable grip and a 6-hole handle plug for secure connection to your soldering station. It incorporates an eddy current heating core and a sensor circuit board for precise thermostatic control.

Негизги компоненттер:

• Soldering Iron Tip: The working end that transfers heat to the solder joint.
• Eddy Current Heating Core: Provides rapid and stable heating.
• Дат баспас болоттон жасалган жең: Protects the heating core and tip.
• Жаңгак: Secures the tip and sleeve assembly.
• Sensor Circuit Board: Monitors and regulates the tip temperature for thermostatic control.
• 6-hole Handle Plug: Connects the handle to the soldering station.

5. Орнотуу

1. Connect to Soldering Station: Align the 6-hole handle plug of the soldering iron handle with the corresponding receptacle on your compatible soldering station. Gently push and twist the connector until it is securely fastened.
2. Install Soldering Tip: Ensure the soldering iron handle is cool and disconnected from power. Loosen the nut, insert the desired soldering tip into the stainless steel sleeve, and then tighten the nut to secure the tip. Do not overtighten.
3. Стенддеги орун: Always place the soldering iron handle in a heat-resistant stand when not in use.

6. Иштөө нускамалары

1. Күйгүзүү: Turn on your soldering station.
2. Температураны коюу: Adjust the temperature setting on your soldering station to the desired value for your specific soldering task. The thermostatic control of the handle will maintain this temperature.
3. Pre-tinning (Initial Use): For new tips, or after cleaning, apply a small amount of solder to the tip once it reaches operating temperature. This helps prevent oxidation and improves heat transfer.
4. ширетүү: Bring the heated tip into contact with both the component lead and the PCB pad simultaneously. Apply solder to the junction of the tip and the workpieces. Allow the solder to flow and form a good joint, then remove the solder and then the iron.
5. Таза кеңеш: Periodically wipe the tip on a damp sponge or brass wool to remove excess solder and flux residue.
6. Өчүрүү: When finished, turn off the soldering station and allow the iron to cool completely in its stand before storing.

7. Техникалык тейлөө

• Кеңеш тазалоо: Жарнаманын жардамы менен ширетүүчү учту үзгүлтүксүз тазалаңызamp sponge or brass wool. For stubborn oxidation, use a tip tinner/cleaner.
• Кеңешти алмаштыруу: If the tip becomes pitted, corroded, or no longer holds solder effectively, replace it with a new, compatible tip. Ensure the iron is cool and disconnected from power before changing tips.
• Жалпы тазалоо: Keep the handle and cable clean and free from solder splashes or debris. Use a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Сактагыч: Store the soldering iron handle in a dry, dust-free environment when not in use.

8. Кыйынчылыктарды

• Үтүк ысыбайт:
  • Check if the soldering station is powered on and the temperature is set correctly.
  • Ensure the handle's 6-hole plug is securely connected to the station.
  • Verify the soldering tip is properly installed and making good contact with the heating element.
• Poor solder joints:
  • Increase the temperature setting on the soldering station.
  • Clean the soldering tip thoroughly; a dirty or oxidized tip cannot transfer heat efficiently.
  • Ensure the tip is adequately tinned.
  • Check the quality of your solder and flux.
• Temperature fluctuations:
  • Ensure the handle is securely connected to the station.
  • Verify the sensor circuit board is not damaged (requires professional inspection).

9. Техникалык шарттар

10. Колдонуучунун кеңештери

• Always use a compatible soldering station that can properly drive and control the thermostatic features of this handle.
• Experiment with different tip shapes and sizes for various tasks to achieve optimal results.
• Maintain a clean tip at all times for efficient heat transfer and better solder joints.

11. Кепилдик жана колдоо

Кепилдик маалыматы, техникалык колдоо же тейлөө боюнча суроо үчүн баштапкы сатып алуу жериңизге же өндүрүүчүгө түздөн-түз кайрылыңыз. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.