BSTUOKEY A9-S-EM

BSTUOKEY A9-S-EM Access Control Keypad User Manual

Model: A9-S-EM

Brand: BSTUOKEY

1. Киришүү

The BSTUOKEY A9-S-EM is a robust and versatile access control keypad designed for both indoor and outdoor use. Featuring IP67 waterproofing, a backlit touch keypad, and support for 1000 users, it offers secure and convenient access through RFID cards, PIN codes, or a combination of both. This manual provides detailed instructions for installation, operation, and maintenance of your access control system.

BSTUOKEY A9-S-EM Keypad with features listed
Figure 1: BSTUOKEY A9-S-EM Access Control Keypad highlighting key features.

2. Негизги өзгөчөлүктөрү

  • Колдонуучунун сыйымдуулугу: Supports 1000 user cards and 1000 codes, including 100 temporary users.
  • Кирүү режимдери: Card, PIN code, or Card + PIN code.
  • Баскычтоп: Backlit touch keypad for easy operation in low light.
  • Узактыгы: IP67 waterproof rating for indoor and outdoor installation.
  • Коопсуздук: Anti-theft and anti-disassembly alarm functions.
  • Ыңгайлуулугу: Doorbell function integrated.
  • Башкаруу: Supports continuous card enrollment, user-resettable private passwords, and deletion of lost cards via keypad.
  • Кубаттуулугу: Low static current consumption (less than 30mA).
  • Коргоо: Short-circuit protection for relay and alarm outputs (shuts off in 0.1ms).

3. Техникалык шарттар

ӨзгөчөлүкСпецификация
Модель номериA9-S-EM
Бренд атыBSTUOKEY (LUCKING DOOR)
OriginМатерик Кытай
СертификацияЖок (берилген маалыматтар боюнча)
Smart Home платформасыЖок (берилген маалыматтар боюнча)
Колдонуучунун кубаттуулугу1000 users (including 100 temporary users)
Door Open StyleCard / PIN / Card + PIN
Суу өткөрбөйт рейтингиIP67
Баскычтоптун түрүАрткы жарыкка тийип коюңуз
Operating Voltage10-24В DC
Статикалык Current< 30мА
Өлчөмдөрү (болжол менен)13.5см (H) x 4.7cm (W) x 2.5cm (D)
Dimensions of the A9-S-EM Access Control Keypad
Figure 2: Approximate dimensions of the A9-S-EM Keypad.

4. Пакеттин мазмуну

Сураныч, пакетте төмөнкү нерселерди кылдат текшериңиз:

  • 1 x BSTUOKEY A9-S-EM Access Control Keypad
  • 1 x User Manual
  • Монтаждоо бурамалар жана дубал сайгычтар
Contents of the product package including keypad, manual, and screws
3-сүрөт: Пакеттин мазмуну.

5. Орнотуу жана орнотуу

5.1 Физикалык орнотуу

  1. Carefully remove the back cover of the keypad.
  2. Position the back cover on the desired mounting surface and mark the drilling points.
  3. Тешиктерди бургула жана зарыл болсо, дубал тыгындарын салгыла.
  4. Secure the back cover to the wall using the provided screws.
  5. Route the wiring through the designated opening in the back cover.
  6. After completing the wiring (refer to Section 5.2), align the front casing with the back cover and secure it.
Diagram showing how to install the keypad by fixing the back cover first
Figure 4: Installation steps for mounting the keypad.

5.2 Электр өткөргүч схемасы

Connect the keypad to your access control system components (e.g., electric lock, power supply, exit button, doorbell) according to the following wiring diagram and table. Ensure all connections are secure and correctly matched to prevent damage or malfunction.

Detailed wiring diagram for the access control keypad, showing connections for power, lock, and other peripherals
Figure 5: Wiring diagram and connection table.
Wire ColorФункцияЭскертүүлөр
Ачык күрөңNCRelay NC (Normally Closed)
Кызгылт көкCOMRelay COM (Common)
КөкЖОКRelay NO (Normally Open)
КараGNDТерс уюл
КызылDC+10-24V DC Power Input
СарыАЧУУЧыгуу баскычы
КүрөңD_INЭшик байланышы
БозОЙГОЛГОН-Ойготкуч терс
Боз & КараBELLТышкы коңгуроо
Сары & КараBELLТышкы коңгуроо

6. Иштөө нускамалары

The keypad supports various access methods and user management functions. Refer to the full user manual for detailed programming steps. Below are common operations:

6.1 Adding/Deleting Admin Cards

The device uses special "Admin Add Card" and "Admin Delete Card" for quick user management. These cards are typically programmed during initial setup.

Video 1: Demonstration of adding and deleting user cards using admin cards and entering PIN codes on the keypad.

To Add a User Card: Present the "Admin Add Card" to the keypad's reader area, then present the new user card(s) you wish to add. Present the "Admin Add Card" again to exit programming mode.

To Delete a User Card: Present the "Admin Delete Card" to the keypad's reader area, then present the user card(s) you wish to delete. Present the "Admin Delete Card" again to exit programming mode.

6.2 Accessing the Door

  • Using a Card: Present a registered RFID card to the keypad's reader area. The door will unlock.
  • Using a PIN Code: Enter your registered PIN code on the keypad, then press '#'. The door will unlock.
  • Using Card + PIN Code: Present your registered RFID card, then enter your PIN code and press '#'. The door will unlock.

6.3 Resetting Private Passwords

Individual users can reset their own PIN codes. Consult the full user manual for the specific sequence to enter programming mode and change a user's PIN.

6.4 Deleting Lost Cards

In case of a lost or stolen card, it can be deleted from the system using the keypad to maintain security. Refer to the detailed programming instructions in the complete user manual for this procedure.

7. Техникалык тейлөө

  • Тазалоо: Клавиатуранын бетин жумшак, d менен сүртүңүзamp кездеме. Абразивдүү тазалагычтардан же эриткичтерден качыңыз.
  • Курчап турган чөйрөнү коргоо: Although IP67 rated, avoid prolonged submersion or exposure to extreme conditions beyond its rating.
  • Үзгүлтүксүз текшерүүлөр: Зымдардын туташууларында эскирүүнүн же бузулуунун белгилерин мезгил-мезгили менен текшерип туруңуз.
  • Программалык камсыздоонун жаңыртуулары: No information on firmware updates is provided. Assume no user-updatable firmware.

8. Кыйынчылыктарды

  • Баскычтоп жооп бербей жатат:
    • Check power supply connections (10-24V DC).
    • Ensure the keypad is receiving power (backlight should illuminate).
  • Карта таанылган жок:
    • Ensure the card is a 125KHz EM4100 compatible RFID card.
    • Verify the card has been correctly added to the system.
    • Try presenting the card closer to the reader area.
  • PIN код иштебей жатат:
    • Ensure the correct PIN code is entered, followed by '#'.
    • Verify the PIN code is registered and active.
  • Door does not unlock:
    • Check the wiring to the electric lock (NC/NO/COM connections).
    • Ensure the power supply to the lock is functioning correctly.
    • Verify the access method (card, PIN, or card+PIN) is correctly configured and used.
  • Short-circuit protection activated:
    • If the relay or alarm output experiences a short circuit, the device will automatically shut off the output in 0.1ms. Identify and resolve the short circuit, then power cycle the device.

9. Колдонуучунун кеңештери

  • Mastering the Manual: If you've lost your physical manual, this digital version contains crucial setup and operation details. Pay close attention to the wiring diagram for correct installation.
  • Physical Durability: The keypad's robust casing and IP67 rating make it suitable for outdoor use, but proper installation and sealing are still important for long-term performance.

10. Кепилдик жана колдоо

Бул продукт стандарттык өндүрүүчүнүн кепилдик менен келет. Кепилдиктин конкреттүү чоо-жайы, техникалык колдоо же тейлөө боюнча суроо үчүн, сатуучуга же өндүрүүчүгө түздөн-түз кайрылыңыз. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.


BSTUOKEY A9-S-EM Standalone Access Control Keypad RFID Card Reader Demonstration

BSTUOKEY A9-S-EM Standalone Access Control Keypad RFID Card Reader Demonstration

0:30 • 540×952 • өзгөчөлүк_демо

Тектеш документтер - A9-S-EM

Preview LUCKING DOOR SF2EM/MF-W-BT Манжа изин башкаруу тутуму Колдонуучунун колдонмосу
LUCKING DOOR SF2EM/MF-W-BT манжа изин башкаруу системасы үчүн комплекстүү колдонуучу колдонмо. Бул колдонмо коопсуз биометрикалык жана RFID/NFC эшиктерине кирүү үчүн орнотуу, иштетүү, колдонуучуну башкаруу, техникалык мүнөздөмөлөр жана көйгөйлөрдү чечүү боюнча толук нускамаларды камтыйт.
Preview USB RFID ID Card Reader: Instructions and Compatibility Guide
Learn how to use the USB RFID ID Card Reader, its compatibility with EM4100 and TK4100 125kHz cards, and how to distinguish between ID and IC card types. This guide provides technical specifications and operational details for the device.
Preview ENFORCER Bluetooth Mullion Keypad with Reader SK-B241-PQ - SECO-LARM
Detailed specifications, features, and compliance information for the SECO-LARM ENFORCER SK-B241-PQ Bluetooth Mullion Keypad with Reader. Includes installation warnings and warranty details.
Preview Secukey K7 Mini Keypad: Standalone Access Control User Manual
Comprehensive user manual for the Secukey K7 Mini Keypad, detailing installation, programming, access modes, Wiegand integration, and troubleshooting for standalone door access control systems.
Preview Toncont TF1 Keypad Access Control User Manual
User manual for the Toncont TF1 standalone access control and proximity card reader system. This document details the device's features, technical specifications, installation procedures, wiring diagrams, sound and light indicators, advanced settings for user management, access control modes, master card operations, and data backup functionality. It is designed for use in high-end buildings and residential communities.
Preview Суу өткөрбөйт 125kHz RFID Smart Card Reader | ACM Goldbridge Product Overview
ACM Goldbridge суу өткөрбөйт 125kHz RFID смарт-карта окугучунун продуктунун толук сүрөттөлүшү. Өзгөчөлүктөрү Wiegand чыгарууну, IP65 рейтингин жана ар кандай RFID картасын/ачкыч фобунун параметрлерин камтыйт. Техникалык мүнөздөмөлөр, өлчөмдөр, кепилдик жана тейлөө жөнүндө билип алыңыз.