LDARC FB200 Flyball 3S футбол дронун колдонуу боюнча колдонмо

1. Киришүү

The LDARC FB200 is a specialized soccer drone designed for air confrontation and competition, adhering to FAI F9A-B technical parameters. This drone features altitude holding, a fully enclosed spherical design for safety, and a versatile LED lighting system with one-key switching for various effects and colors. It is suitable for FPV entry-level training, visual flight practice, and light show performances. With an impressive flight time of approximately 10 minutes, the FB200 is a cutting-edge device for the rapidly growing sport of drone soccer, which gained international recognition in 2019. It is ideal for clubs, training institutions, schools, malls, and outdoor activities.

FB200 drones participating in a competition.

2. Коопсуздук маалыматы

• Эскертүү: Not suitable for children under 36 months due to small parts and potential hazards.
• Always operate the drone in open, clear areas, away from people, animals, and obstacles.
• Ар бир учуудан мурун батареянын толук заряддалганын жана бекем орнотулганын текшериңиз.
• Do not modify the drone or its components, as this may compromise safety and performance.
• Keep fingers and loose clothing away from propellers when the drone is powered on.
• In case of a crash, immediately disconnect the battery.

3. Пакеттин мазмуну

The FB200 drone is available in several versions. Please check your specific package list:

• FB200 FPV PNP:
  • FB200 Drone (with camera, VTX, without receiver) x1
• FB200 FPV BNF (AC900):
  • FB200 Drone (with camera, VTX, AC900 receiver installed) x1
• FB200 FPV BNF (RX2A):
  • FB200 Drone (with camera, VTX, RX2A receiver installed) x1
• FB200 FPV RTF:
  • FB200 Drone (with camera, VTX, AC900 receiver installed) x1
  • EX8 Transmitter x1
  • AC400 Charger x1
  • Handbag x1

Note: Battery (recommended 11.4V 1150mAh 20C) and radio (for PNP/BNF versions) are typically sold separately unless specified in the RTF package.

Example of FB200 drones and controllers.

4. Техникалык шарттар

Жалпы параметрлер:

Электрондук компоненттер:

The F411E35A Flight Controller and ESC unit.

5. Орнотуу

5.1 Алгачкы текшерүү

• Carefully unbox your FB200 drone and all included accessories.
• Inspect the drone for any visible damage to the frame, propellers, or electronics.
• Ensure all propellers are securely attached and free from cracks or bends.

5.2 Батареяны орнотуу жана заряддоо

• The FB200 requires an 11.4V 1150mAh 20C 3S LiPo battery (not included in PNP/BNF versions).
• Connect the battery to a compatible LiPo charger (e.g., AC400 charger for RTF version) and charge it fully before first use. Always follow the charger's instructions and safety guidelines.
• Once charged, carefully connect the battery to the drone's power connector. Ensure a secure connection.

5.3 Transmitter (Radio) Setup (for PNP/BNF versions)

If you have a PNP or BNF version, you will need to provide your own compatible radio transmitter.

• For AC900 Receiver: This receiver supports S-FHSS, D16 non-EU, and D16 EU LBT protocols. Refer to your transmitter's manual for binding instructions specific to these protocols.
• For RX2A PRO Receiver: This receiver supports AFHDS 2A protocol. Refer to your AFHDS 2A compatible transmitter's manual for binding instructions.
• Ensure your transmitter is properly configured with the correct channel mapping and flight modes for the FB200.

5.4 Software Configuration (Advanced Users)

The FB200 utilizes an F411 open-source flight controller. While factory parameters are pre-adjusted for optimal performance, advanced users can fine-tune settings using the iNAV configurator software.

• Download the iNAV configurator from the official iNAV webсайт.
• Connect the FB200 to your computer via a USB cable.
• Launch the iNAV configurator and follow the on-screen instructions to connect to your drone.
• You can adjust flight parameters, calibrate sensors, and configure advanced features. Refer to the iNAV documentation for detailed instructions.

iNAV configurator software for advanced parameter settings.

A detailed PDF manual for the FB200 is available for download бул жерде.

6. Иштөө нускамалары

6.1 Учуу алдындагы текшерүү

• Ensure the drone's battery is fully charged and securely connected.
• Turn on your remote transmitter and ensure it is bound to the drone.
• Check the flight area for any potential hazards or obstacles.

6.2 Taking Off and Flight Modes

• Дронду тегиз, тегиз жерге орнотуңуз.
• Arm the motors using your transmitter's designated arming sequence (refer to your transmitter manual).
• Gently increase the throttle to take off.
• The FB200 features Altitude Holding жана Self-Stable Flight Mode, making it easier for beginners to control. These modes help maintain a consistent altitude and level flight.

The FB200 in altitude holding and self-stable flight mode.

6.3 LED Controlling System

The FB200 is equipped with 38 adjustable LEDs and a smart light control system, offering 8 colors and multiple effects modes, adjustable via a one-key switch on the drone or transmitter (if configured).

LED control board and available light modes.

• Adjustable Colors (Circle & Rear Light): White, Green, Yellow, Orange, Red, Blue, Pink, Cyan, Extinguished.
• Circle Light Effects Modes:
  1. Адатта күйүк
  2. Дем алуу
  3. Агым
  4. Flash Fast
  5. Interval Blinks
  6. Blink at Alternate Intervals
• Rear Light Effects Modes:
  1. Адатта күйүк
  2. Дем алуу
  3. Агым
  4. Flash Fast

One-key switch for various LED colors.

LEDs can be used for team and member identification during competitions.

6.4 конуу

• Slowly decrease the throttle to bring the drone down gently.
• Once landed, disarm the motors using your transmitter's designated sequence.
• Disconnect the battery from the drone after each flight.

Official product video demonstrating the FB200 drone in action.

7. Техникалык тейлөө

• Тазалоо: Regularly clean the drone's frame and propellers with a soft, dry cloth. Avoid using liquids directly on electronic components.
• Пропеллерди текшерүү: Inspect propellers before and after each flight for any damage. Replace bent or cracked propellers immediately to ensure stable flight.
• Батареяга кам көрүү: Store LiPo batteries in a cool, dry place at storage voltagд. Ашыкча кубаттабаңыз же ашыкча заряддабаңыз.
• Frame Inspection: Check the spherical outer frame and carbon fiber chassis for any cracks or damage, especially after impacts.
• Программалык камсыздоонун жаңыртуулары: Periodically check the iNAV website for firmware updates for the F411 flight controller to ensure optimal performance and access to new features.

8. Кыйынчылыктарды

• Дрон күйбөй жатат: Ensure the battery is fully charged and correctly connected. Check for any loose wires or damaged connectors.
• Дрон өткөргүчкө жооп бербей жатат: Verify that the transmitter is turned on, has sufficient battery, and is correctly bound to the drone's receiver. Check the receiver's status light.
• Туруксуз учуу/Дрифт: Calibrate the accelerometers and gyroscopes in the iNAV configurator. Check for damaged or unbalanced propellers. Ensure the drone is taking off from a level surface.
• Светодиоддор иштебей жатат: Check the connections to the LED controller. If using the one-key switch, cycle through the modes to ensure it's not set to 'extinguished'.
• Кыска учуу убактысы: Ensure the battery is fully charged and healthy. Old or damaged batteries may have reduced capacity. Avoid aggressive flying styles that consume more power.

9. Колдонуучунун кеңештери

• Ачык мейкиндиктерде машыгуу: Even with the protective cage, practice flying in wide-open areas to get accustomed to the controls before attempting complex maneuvers or competitive play.
• Utilize Altitude Hold: For beginners, the altitude hold feature is excellent for maintaining a steady height, allowing you to focus on directional control.
• Experiment with LED Modes: The various LED colors and effects can be used for team identification in soccer drone games or simply for aesthetic appeal during light shows.
• Consider FPV Goggles: For an immersive experience and precise control, especially in competitive scenarios, consider using FPV goggles with the drone's Nano2 Camera.
• Build a Course: Enhance your training by setting up simple gates or goals. The FB200 is designed for this, and you can even use foldable racing gates for a home setup.

10. Кепилдик жана колдоо

For specific warranty information, please refer to the seller's terms and conditions at the time of purchase. Typically, products come with a limited warranty covering manufacturing defects.

For technical support, troubleshooting assistance, or inquiries regarding replacement parts, please contact the LDARC Official Store or your authorized reseller. When contacting support, please provide your product model (FB200) and a detailed description of the issue.