Introduction
The Aigo APC1 is a versatile controller designed to manage both the speed of your PC case cooling fans and the lighting effects of Addressable RGB (ARGB) components. It features multiple ports for connecting fans and ARGB devices, offering both manual control via a remote and synchronization capabilities with compatible motherboards. This manual provides detailed instructions for installation, operation, and troubleshooting to help you get the most out of your APC1 controller.
Продукт өзгөчөлүктөрү
- Кеңири байланыш: Equipped with 6 ARGB (5V-3Pin) signal output ports and 6 PWM (4Pin) signal output ports, allowing control of multiple fans and lighting devices.
- Энелик платаны синхрондоштуруу: Supports synchronous light control with major motherboard brands including ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, and ASRock Polychrome Sync.
- Алыстан башкаруу: Includes a dedicated remote control for convenient adjustment of lighting effects, colors, and fan speeds.
- Case Reset Button Integration: Can be linked to your PC case's reset button for alternative control of lighting modes.
- PWM Fan Speed Control: Provides temperature-controlled fan speed signals for efficient cooling.
- Туруктуу курулуш: Made from plastic with compact dimensions for easy installation.
Пакеттин мазмуну
Сураныч, төмөнкү нерселер үчүн кутучаны белгилеңиз:
- APC1 Controller (x1)
- 5V RGB Signal Cable (500±10mm) (x1)
- PWM Signal Cable (500±10mm) (x1)
- Adhesive Gum / Double Side Velcro (x1)
- Алыстан башкаруу (x1) (Note: CR2025 button battery for remote control is NOT included and must be purchased separately.)
Image: Aigo APC1 controller and its accessories, including the remote control, PWM cable, ARGB signal cable, and adhesive gum.
Техникалык шарттар
| Атрибут | Нарк |
|---|---|
| Бренд аты | Айго |
| Модель номери | APC1 |
| Type | Желдетүүчү ылдамдык контроллери |
| Материал | Пластик |
| Калыңдыгы | 14мм |
| Салмагы | 0.11 кг |
| Өлчөм | 100мм x 46мм x 14мм |
| Power Interface | SATA, 5v-3pin ARGB, 4PIN |
| RGB колдоо | A-RGB |
| Origin | Материк Кытай |
Орнотуу нускамалары
1. Коопсуздук чаралары
- Always power off your computer and disconnect it from the power source before installing any internal components.
- Discharge any static electricity by touching a grounded metal object before handling the controller or other components.
2. Controller Placement
Choose a suitable location inside your PC case for the APC1 controller. Use the provided adhesive gum or double-sided Velcro to secure the controller firmly. Ensure it is placed in an area that allows for proper cable management and airflow.
Image: The Aigo APC1 controller showing the application of adhesive gum for mounting within a PC case.
3. Зымдарды туташтыруу
Refer to the diagram below for detailed wiring instructions. Ensure all connections are secure and correctly oriented.
Image: Controller Installation Diagram illustrating all necessary connections.
- Электр камсыздоо: Connect the controller to your PC's power supply using the SATA power connector. This is essential for the controller to function.
- PWM күйөрмандары: Connect your 4-pin PWM fans to the 'PWM' ports on the controller. The controller has 6 PWM signal output ports.
- ARGB Devices: Connect your 5V-3Pin ARGB devices (e.g., ARGB fans, LED strips) to the 'ARGB' ports on the controller. The controller has 6 ARGB signal output ports. Important: When connecting multiple fans, please connect the first white port first.
- Motherboard ARGB Sync (Optional): If your motherboard supports 5V/3Pin ARGB synchronization (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync), connect the provided 5V RGB Signal Cable from the controller's 'SYNC' port to your motherboard's 5V/3Pin A-RGB header. Note: This controller is incompatible with 12V/4Pin RGB headers.
Image: Synchronous Motherboard Light Control diagram, highlighting the correct 5V/3Pin A-RGB connection and incompatibility with 12V/4Pin.
- Motherboard PWM Sync (Optional): Connect the provided PWM Signal Cable from the controller's 'MBPWM SYNC' port to a PWM fan header on your motherboard. This allows the motherboard to control the fan speeds connected to the controller. Note: The PWM signal input port only carries the PWM signal. If you need to measure fan speed, ensure you plug into the PWM/FG signal input port.
Сүрөт: Жакын план view of the PWM/FG signal input port on the controller.
- PC Case Reset Button (Optional): You can connect your PC case's reset button jumper to the 'RESET' port on the controller. This allows the case's reset button to cycle through lighting modes or turn off the lights. This is not necessary to link; buyers can choose whether to link the restart button to control according to their own needs.
Image: Convenient Control diagram showing the connection of a PC case reset button to the controller.
Иштөө нускамалары
1. Алыстан башкаруу функциялары
The remote control allows you to manage the lighting effects and fan speeds. Ensure a CR2025 button battery is installed in the remote.
Image: Remote Control layout with button descriptions.
- Кубат баскычы (кызыл тегерек): Turns the controller's lighting on or off.
- Mode Control (+/-): Cycles through the 62 built-in lighting modes.
- LED Speed (+/-): Динамикалык жарыктандыруу эффекттеринин ылдамдыгын тууралайт.
- Color Selection (R, G, B): Selects static red, green, or blue colors.
- Атайын режимдер: Buttons for 'Star Night Mode', 'Rainbow Mode', 'Lightning Mode', and 'Breathing Mode' activate specific lighting patterns.
- M/B SYNC: Switches between remote control mode and motherboard synchronization mode.
2. Controller Button / Reset Switch Control
The controller has 62 default lighting modes. If you have connected your PC case's reset button to the controller's 'RESET' port:
- Кыска басуу: Cycles through the lighting modes.
- Басыңыз жана кармап туруңуз (3 секунд): Switches off the lights.
- Басыңыз жана кармап туруңуз (6 секунд): Switches to motherboard mode (if connected).
- Short Press (from motherboard mode): Exits back to automatic control mode.
You can also use the light off button on the remote control or the motherboard mode button to control the lighting.
Техникалык тейлөө
- Тазалоо: Periodically clean the controller and connected fans to prevent dust buildup, which can affect performance and lifespan. Use a soft, dry cloth or compressed air.
- Байланыштары: Кабелдик туташуулар коопсуз жана бузулбашы үчүн дайыма текшерип туруңуз.
- Курчап турган чөйрө: Ensure the controller is installed in a well-ventilated area within your PC case to prevent overheating.
Проблемаларды чечүү
- Электр жарыгы жок:
- Ensure the SATA power cable is securely connected from the controller to the PC power supply.
- Check if the remote control has a working CR2025 button battery installed.
- ARGB Lights Not Synchronizing with Motherboard:
- Verify that the 5V RGB Signal Cable is correctly connected from the controller's 'SYNC' port to your motherboard's 5V/3Pin A-RGB header.
- Confirm that your motherboard actually supports 5V/3Pin ARGB synchronization. The controller is not compatible with 12V/4Pin RGB headers.
- Ensure the controller is set to motherboard sync mode via the remote or the case reset button (if configured).
- Fan Speed Issues:
- Check that the PWM Signal Cable is properly connected from the controller's 'MBPWM SYNC' port to a PWM fan header on your motherboard.
- If measuring fan speed, ensure the fan is connected to the 'PWM/FG' signal input port.
- Fan speed adjustment is typically managed through the motherboard BIOS or software, not directly by the controller's remote for individual fans.
- Алыстан башкаруу иштебейт:
- CR2025 баскычынын батареясын алмаштырыңыз.
- Ensure there is no obstruction between the remote and the controller.
- All ARGB Channels Display the Same Effect:
- The Aigo APC1 controller operates all connected ARGB channels in parallel, meaning they will display the same lighting effect simultaneously. It does not support individual per-channel software control.
Колдонуучу сунуштар
- For optimal fan speed control, connect the controller's PWM signal cable to a motherboard header and manage fan curves through your motherboard's BIOS or utility software.
- Remember that the remote control requires a CR2025 button battery, which is not included in the package. Have one ready for immediate use.
- When connecting multiple ARGB fans or devices, always connect the first device to the 'white port' on the controller first, as indicated in some diagrams, to ensure proper signal flow.
- If your motherboard lacks ARGB headers, this controller allows you to still enjoy various ARGB lighting effects using the remote control's built-in modes.
Кепилдик жана колдоо
For any issues or questions regarding your Aigo APC1 controller, please contact the seller or manufacturer's customer support. Keep your purchase receipt as proof of purchase for warranty claims. Specific warranty terms and conditions may vary by region and retailer.
