1. Продукт бүтүп калдыview
The Herdio HMA-BTB01 is a compact Bluetooth audio amplifier designed to connect Bluetooth-enabled devices to low impedance speakers. It features a built-in power amplifier and an auxiliary input for wired connections. Its small size makes it suitable for installation in various spaces, including ceiling voids.
2. Пакеттин мазмуну
Таңгактан чыгарууда бардык буюмдардын бар экенин жана жакшы абалда экендигин текшериңиз:
- 1 x Herdio HMA-BTB01 Bluetooth & Aux Mini Ampөмүрлүү
- 1 x 12V Power Supply Unit (PSU) with regional plug (EU/US/UK/AU plug, as selected)
3. Орнотуу нускамалары
Follow these steps to set up your Herdio HMA-BTB01 ampөмүр берүүчү:
3.1 Орнотуу
- Install the Bluetooth amplifier in a dry location, such as a loft space or within a wall cavity. Avoid areas with high humidity or direct exposure to water.
3.2 Электр өткөргүч схемасы
3.3 Динамиктерди бириктирүү
The amplifier supports up to 4 speakers (4 or 8 Ohms). Connect your passive speakers to the screw terminals:
- SPK L+ / SPK L-: For Left Channel Speaker
- SPK R+ / SPK R-: For Right Channel Speaker
3.4 Кубатты туташтыруу
Connect the supplied 12V PSU to the 'Power Jack' input on the amplifier. Ensure the correct regional plug is used.
3.5 Көмөкчү киргизүү
For wired audio sources, connect a 3.5mm audio cable from your device to the 'AUX IN' jack on the ampөмүрлүү.
3.6 TWS Switch
The TWS (True Wireless Sound) switch is located on the side of the amplifier. This switch is used when pairing two amplifiers together for a true stereo surround sound experience. Ensure the TWS switch is in the 'ON' position on both amplifiers before attempting to pair them.
4. Иштөө нускамалары
4.1 Bluetooth байланышы
Аспабыңызды Bluetooth аркылуу туташтыруу үчүн:
- камсыз кылуу ampкөтөргүч күйгүзүлгөн.
- Bluetooth иштетилген түзмөгүңүздө (смартфон, планшет ж.б.) жеткиликтүү Bluetooth түзмөктөрүн издеңиз.
- Select the device named "Herdio" from the list. No password is required for connection.
- Once connected, audio from your device will play through the speakers.
The Bluetooth connection has a range of up to 50 feet (approximately 15 meters).
4.2 Auxiliary Input Usage
If you prefer a wired connection or your device does not have Bluetooth, connect it using a 3.5mm audio cable to the 'AUX IN' port. The amplifier will automatically switch to the auxiliary input when a signal is detected.
4.3 TWS (True Wireless Sound) Pairing
To achieve true stereo sound with two Herdio HMA-BTB01 ampжашагандар:
- Экөөнү камсыз кылыңыз amplifiers are powered on and their TWS switches are set to 'ON'.
- Pair your Bluetooth device to one of the ampкөтөргүчтөр. Бул amplifier will act as the master unit.
- эки amplifiers will automatically pair with each other, creating a stereo pair.
4.4 Шайкештик
The Herdio HMA-BTB01 amplifier is compatible with various devices, including Amazon Alexa and Echo products, allowing for seamless integration into smart home audio setups.
5. Техникалык тейлөө
Сиздин узак жана оптималдуу иштешин камсыз кылуу үчүн ampөмүр берүүчү:
- Keep the unit in a dry environment. Avoid exposure to moisture, rain, or extreme temperatures.
- Сыртын жумшак, кургак чүпүрөк менен тазалаңыз. Катуу химиялык заттарды же абразивдүү тазалагычтарды колдонбоңуз.
- Ашыкча ысып кетүүнүн алдын алуу үчүн аппараттын айланасында туура желдетүүнү камсыз кылыңыз.
6. Кыйынчылыктарды
- Үн чыгышы жок:
- экендигин текшериңиз amplifier is powered on and the power adapter is securely connected.
- Verify speaker connections are correct (SPK L+/-, SPK R+/-).
- Ensure your audio source (Bluetooth device or Aux cable) is properly connected and playing audio.
- Check the volume level on both your audio source and the ampөмүрлүү.
- Bluetooth жупташтыруу маселелери:
- камсыз кылуу amplifier is within the 50-foot Bluetooth range of your device.
- Confirm the Bluetooth name "Herdio" appears on your device's scan list. No password is required.
- If using TWS, ensure both amplifiers have the TWS switch 'ON' before pairing your device to one of them.
- Amplifier makes noise when Bluetooth disconnects:
- This is normal behavior. When a Bluetooth device disconnects, the amplifier may emit a sound as it enters a search mode for new connections.
7. Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Бренд аты | Herdio |
| Модель номери | HMA-BTB01 |
| Каналдар | 4 |
| Канал үчүн максималдуу кубаттуулук | 6W |
| Total Speaker Output | Up to 4 x 80W (at 4 or 8 Ohms) |
| Bluetooth версиясы | 4.2 |
| Bluetooth аты | Herdio |
| Bluetooth диапазону | 50 фут (15 метр) чейин |
| Киргизүү параметрлери | Bluetooth, AUX IN (3.5mm Jack) |
| Электр камсыздоо | 12V PSU (Supplied) |
| Plug Specifications | EU/US/UK/AU (as selected) |
| Материал | Пластмассалар |
| Түс | Кара |
| Салмагы | 0.5 кг |
| Сертификация | CE |
| Origin | Материк Кытай |
8. Колдонуучунун кеңештери
- For a true stereo experience, utilize the TWS function by pairing two Herdio amplifiers. Remember to turn on the TWS switch on both units before pairing.
- The Bluetooth connection does not require a password, simply select "Herdio" from your device's Bluetooth list.
- ар дайым камсыз кылуу amplifier is installed in a dry, well-ventilated area to prevent damage and ensure optimal performance.
9. Кепилдик жана колдоо
For any issues or support inquiries, please contact your retailer or the Herdio customer service. Keep your purchase receipt for warranty claims.
