1. Киришүү
This manual provides detailed instructions for the installation, operation, and maintenance of the Gearbox Shifter Lever Cable Linkage Bushing Repair Kit for Ford Fiesta MK5 models (2002-2008). This kit is designed to repair a broken transmission shifter linkage bushing, addressing issues such as inability to mount gear or a detached gear cable. By replacing the faulty bushing, you can restore proper function to your manual transmission system.
2. Продукттун спецификациялары
| Атрибут | Нарк |
|---|---|
| Материал | ABS пластик |
| Модель номери | Gear Linkage Bushing |
| OEM № | 4S6P-7412-AA |
| Origin | Материк Кытай |
2.1 Өлчөмдөр
- Ички диаметри: 5мм
- Тешик диаметри: 7мм
- Бийиктиги: 19 мм
- Негизги Диаметри: 19mm
3. Пакеттин мазмуну
The repair kit includes the following items:
- 2 x Gear Shift Cable Linkage Bushing
4. Орнотуу боюнча колдонмо
Биринчи коопсуздук: Before beginning any work on your vehicle, ensure it is safely parked on a level surface, the engine is off, and the parking brake is engaged. If lifting the vehicle, use appropriate jack stands for support. Disconnect the battery's negative terminal to prevent accidental electrical shorts.
4.1 Талап кылынган куралдар (кошумча эмес)
- Basic automotive hand tools (wrenches, sockets)
- Pry tool or flathead screwdriver (for old bushing removal)
- Grease or lubricant (optional, for new bushing installation)
4.2 Этап-этабы менен орнотуу
- Locate the Shifter Linkage: Identify the gearbox shifter lever cable linkage that requires repair. This is typically found near the transmission, connecting the shifter cable to the gearbox lever.
- Inspect the Existing Bushing: Confirm that the existing bushing is damaged, worn, or missing, causing play or disconnection in the linkage.
- Эски втулканы алып салуу: Carefully use a pry tool or screwdriver to remove any remnants of the old, damaged bushing from the linkage. Clean the area thoroughly.
- Жаңы винилди даярдоо: Take one of the new bushings from the kit. You may apply a small amount of grease or lubricant to the bushing for easier installation, though it is not always necessary.
- Жаңы втулканы орнотуу: Align the new bushing with the linkage connection point. Press the bushing firmly into place. Ensure it is seated correctly and securely within the linkage.
- Байланышты текшерүү: Reconnect the shifter cable to the lever, ensuring the new bushing provides a tight and secure connection. There should be no excessive play.
- Test Shifting: Once installed, manually move the gear lever to check for smooth and positive engagement of all gears.
- Акыркы текшерүүлөр: Reconnect the battery (if disconnected) and perform a final test drive to ensure proper gear selection and operation.
5. Операция
The gearbox shifter lever cable linkage bushing is a passive component that facilitates the smooth and precise transfer of movement from the gear shifter to the transmission. Once correctly installed, it ensures that the gear cable remains securely connected to the gearbox lever, allowing for proper gear engagement and disengagement. No specific operational steps are required beyond normal vehicle operation.
6. Техникалык тейлөө
The bushing is designed for durability and typically requires minimal maintenance. However, regular inspection of the gear linkage system is recommended, especially during routine vehicle servicing. Check for:
- Signs of wear or cracking on the rubber material.
- Excessive play or looseness in the connection.
- Corrosion or damage to surrounding metal components.
If any issues are observed, consider replacing the bushing to prevent further damage to the transmission system.
7. Кыйынчылыктарды
7.1 Жалпы маселелер жана чечимдер
- Issue: Difficulty engaging gears or gears popping out.
- Чечим: Re-inspect the bushing installation to ensure it is fully seated and secure. Check for any remaining play in the linkage. If the issue persists, other components of the shifter mechanism or transmission may need inspection by a qualified mechanic.
- Issue: Gear cable detaches from the lever.
- Чечим: This indicates the bushing is either not installed correctly or has failed. Ensure the bushing is properly pressed into place and provides a tight fit. If the bushing itself is damaged, replace it with the spare provided in the kit.
8. Колдонуучунун кеңештери
- Backup Bushing: The kit includes two bushings. Keep the spare as a backup for future repairs or if the first installation is unsuccessful.
- Practical Use: This item is specifically designed for use in the gearbox shifter linkage to restore proper gear selection.
9. Кепилдик жана колдоо
For any questions regarding the product, installation, or potential defects, please contact the seller or manufacturer directly. Keep your purchase records for reference. Specific warranty details may vary by seller.
